Design and Testing of a New Compliant Parallel-Kinematic Constant-Force End-Effector

This paper presents the design, analysis and testing of a novel three-degree-of-freedom (3-DOF) parallel-kinematic constant-force end-effector. The constant-force end-effector enables a safe interaction between the end-effector and contacted object. To obtain the constant-force property without extra fixing support, the symmetrical bistable flexure hinges are adopted. Then, to reduce the constant-force value, a preloading constant-force mechanism is introduced. The parallel-kinematic mechanism based on flexure hinges is constructed to decouple the 3-DOF motion. FEA simulation study is conducted to investigate the constant-force property and the decoupling ratio of the designed mechanism. Moreover, a prototype is fabricated and experimental testing is conducted to verify the performance of the constant-force mechanism.

[1]  Chao-Chieh Lan,et al.  An Adjustable Constant-Force Mechanism for Adaptive End-Effector Operations , 2012 .

[2]  Takashi Kataoka,et al.  Fruit detection system and an end effector for robotic harvesting of Fuji apples , 2010 .

[3]  Mitsuji Monta,et al.  End-Effectors for Tomato Harvesting Robot , 1998, Artificial Intelligence Review.

[4]  Dung-An Wang,et al.  A constant-force bistable mechanism for force regulation and overload protection , 2011 .

[5]  Qingsong Xu,et al.  Optimal design and fabrication of a piezoactuated flexure XYZ parallel micropositioning stage , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  Qingsong Xu,et al.  Design and modeling of constant-force mechanisms: A survey , 2018 .

[7]  Kouhei Ohnishi,et al.  On the Explicit Robust Force Control via Disturbance Observer , 2015, IEEE Transactions on Industrial Electronics.

[8]  Arne Wahrburg,et al.  Motor-Current-Based Estimation of Cartesian Contact Forces and Torques for Robotic Manipulators and Its Application to Force Control , 2018, IEEE Transactions on Automation Science and Engineering.

[9]  Shorya Awtar,et al.  An XYZ Parallel Kinematic Flexure Mechanism With Geometrically Decoupled Degrees of Freedom , 2011 .

[10]  Homayoon Kazerooni,et al.  Direct-drive, active compliant end-effector (active RCC) , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[11]  Yulong Zhang,et al.  Design and Control of a Novel Compliant Constant-Force Gripper Based on Buckled Fixed-Guided Beams , 2017, IEEE/ASME Transactions on Mechatronics.

[12]  Kouhei Ohnishi,et al.  Motion control for advanced mechatronics , 1996 .

[13]  Dung-An Wang,et al.  A constant-force bistable micromechanism , 2013 .

[14]  Qingsong Xu,et al.  Design and Testing of a Flexure-Based Constant-Force Stage for Biological Cell Micromanipulation , 2018, IEEE Transactions on Automation Science and Engineering.

[15]  Qingsong Xu,et al.  Design and Development of a Novel Compliant Gripper With Integrated Position and Grasping/Interaction Force Sensing , 2017, IEEE Transactions on Automation Science and Engineering.

[16]  Qingsong Xu,et al.  Design of a flexure-based constant-force XY precision positioning stage , 2017 .

[17]  Larry L. Howell,et al.  Compliant constant-force linear-motion mechanism , 2016 .

[18]  R. H. Nathan.  A Constant Force Generation Mechanism , 1985 .

[19]  Qingsong Xu,et al.  Design of a Large-Stroke Bistable Mechanism for the Application in Constant-Force Micropositioning Stage , 2017 .

[20]  Larry L. Howell,et al.  A compliant end-effector for microscribing , 2005 .

[21]  Mary Frecker,et al.  Design of a piezoelectric inchworm actuator and compliant end effector for minimally invasive surgery , 1999, Smart Structures.

[22]  K. Tsui,et al.  Micromachined end-effector and techniques for directed MEMS assembly , 2004 .

[23]  Qingsong Xu,et al.  Design, fabrication and testing of a novel symmetrical 3-DOF large-stroke parallel micro/nano-positioning stage , 2017 .