Investigation of a compact and broadband balun

Investigations indicate that the bandwidth and circuit size of a conventional branch-line balun can be improved, where the bandwidth improvement is achieved by introducing a quarter-wavelength short-stub at one of the output ports and the size reduction is implemented by meandering the branches of a conventional balun. In this article, a planar balun with broadband bandwidth and compact size is proposed and confirmed, theoretically and experimentally. The results show that a circuit area is reduced to 47.4%, and when referring to a phase difference of ±10°, a flat coupling of over 30% is achieved from measurements, and within this phase difference, the magnitude imbalance is maintained within ±0.25 dB. Both simulated results and measured data are presented, and a good performance is observed. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1380–1384, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23361

[1]  M.Y.W. Chia,et al.  A new wide-band planar balun on a single-layer PCB , 2005, IEEE Microwave and Wireless Components Letters.

[2]  N. Marchand,et al.  Transmission-line Conversion Transformers , 1944 .

[3]  M.B. Steer,et al.  New classes of miniaturized planar Marchand baluns , 2005, IEEE Transactions on Microwave Theory and Techniques.

[4]  Tae-Soon Yun,et al.  A broadband microstrip Marchand balun with vertical coupling structure , 2007 .

[5]  Byungje Lee,et al.  Stubbed Branch Line Balun , 2007, IEEE Microwave and Wireless Components Letters.

[6]  Jian Li,et al.  A New FDTD Formulation for Wave Propagation in Biological Media With Cole–Cole Model , 2006, IEEE Microwave and Wireless Components Letters.

[7]  Branka Jokanovic,et al.  Review of printed Marchand and double Y baluns: characteristics and application , 1994 .

[8]  Ian D. Robertson,et al.  Analysis and design of impedance-transforming planar Marchand baluns , 2001 .

[9]  Do-Hoon Kwon.  A wideband balun and vertical transition between conductor-backed CPW and parallel-strip transmission line , 2006 .

[10]  Amin M. Abbosh,et al.  An UWB planar out‐of‐phase power divider employing parallel stripline‐microstrip transitions , 2007 .

[11]  M.E. Bialkowski,et al.  Design of a Compact UWB Out-of-Phase Power Divider , 2007, IEEE Microwave and Wireless Components Letters.

[12]  Do-Hoon Kwon.  Wideband balun and vertical transition between microstrip and parallel‐strip transmission line , 2007 .

[13]  M.B. Steer,et al.  Tapped marchand baluns for matching applications , 2006, IEEE Transactions on Microwave Theory and Techniques.

[14]  Shanjia Xu,et al.  A novel balun structure with a composite right–left‐handed transmission line , 2005 .

[15]  Jong-Sik Lim,et al.  A 700- to 2500-MHz microstrip balun using a Wilkinson divider and 3-dB quadrature couplers , 2005 .

[16]  Hong-Yeh Chang,et al.  Analysis of Multiconductor Coupled-Line Marchand Baluns for Miniature MMIC Design , 2007, IEEE Transactions on Microwave Theory and Techniques.

[17]  Quan Xue,et al.  Miniaturised branch-line balun with bandwidth enhancement , 2007 .

[18]  Kian Sen Ang,et al.  Multisection impedance-transforming coupled-line baluns , 2003 .

[19]  Mischa Dohler,et al.  Inverse incomplete gamma function and its application , 2006 .

[20]  Lei Zhu,et al.  Multisection vialess microstrip‐line balun with backside aperture and floating patches , 2007 .

[21]  Michael Yan Wah Chia,et al.  A novel LTCC miniaturized dualband balun , 2006 .

[22]  M. Kitlinski,et al.  A novel compact broadband 5–35 GHz balun , 2007 .

[23]  Kyu-Pyung Hwang,et al.  RF balun embedded in multilayer organic substrate , 2007 .