A new quality factor for the building stone industry: a case study of stone blocks, slabs, and tiles

In building stones, discontinuities, non-uniformity, and irregular shape are among the problems that reduce the quality of products. Stone blocks, slabs, and tiles are the main products of quarries and stone processing plants. Quantifying the quality is a key factor in valuation of these products. This paper proposes a quality factor formula to determine the quality of stone blocks (three-dimensional) and products from stone processing plants (two-dimensional). This factor, which shows the uniformity and esthetic index of a piece of stone, is determined based on the shape quality (α), number, size, and esthetic quality (β) of the pieces and the discontinuity factor (γ) that separates the pieces. The quality factor is defined in a way that each previously mentioned characteristic of a piece is involved in the quality factor formula calculation. The quality factor ranges between 0 and 1 and can be expressed as a percentage. The proposed quality factor was calculated for a number of different stone blocks, slabs, and tiles to examine the validity of the quality factor formula. The results showed that the shape quality is the most significant parameter in determining the quality of stone blocks in quarries. Moreover, in processing plant products the esthetic quality and the number of stone pieces in a product are the key factors for determination of their quality. The discontinuity factor is a parameter that reduces the quality of stone products significantly. Furthermore, the quality factor formula can be used as a convenient tool for classifying the products of quarries and stone processing plants.

[1]  A. Niaz,et al.  Building stone evaluation—A case study of the sub-Himalayas, Muzaffarabad region, Azad Kashmir, Pakistan , 2016 .

[2]  Marc Elmouttie,et al.  Robust algorithms for polyhedral modelling of fractured rock mass structure , 2013 .

[3]  Z. Fuat Toprak,et al.  Fuzzy-based quality classification model for natural building stone blocks , 2012 .

[4]  Luís M.O. Sousa,et al.  Granite fracture index to check suitability of granite outcrops for quarrying , 2007 .

[5]  M. Mutlutürk.  Determining the amount of marketable blocks of dimensional stone before actual extraction , 2007 .

[6]  Reza Kakaie,et al.  Development of 2D computer program to determine geometry of rock mass blocks , 2014 .

[7]  Raheb Bagherpour,et al.  Safety risk assessment of Iran’s dimension stone quarries (Exploited by diamond wire cutting method) , 2014 .

[8]  K. R. Saxena,et al.  In-Situ Characterization of Rocks , 2002 .

[9]  John-Paul Latham,et al.  Prediction of in-situ block size distributions with reference to armourstone for breakwaters , 2006 .

[10]  Jorge M. F. Carvalho,et al.  Decision criteria for the exploration of ornamental-stone deposits: Application to the marbles of the Portuguese Estremoz Anticline , 2008 .

[11]  L. M. Tomas-Balibrea,et al.  Classification of marble surfaces using wavelets , 2003 .

[12]  J. Martinez-Alajarin,et al.  Supervised classification of marble textures using support vector machines , 2004 .

[13]  J. Martín-Martínez,et al.  Addition of unmodified nanoclay to improve the performance of unsaturated polyester resin coating on natural stone , 2011 .

[14]  O. Selonen,et al.  Evaluation of dimension stone in gneissic rocks : a case history from southern Finland , 2000 .

[15]  Siegfried Siegesmund,et al.  Optimized extraction of dimension stone blocks , 2011 .

[16]  M. Inmaculada Alvarez-Fernandez,et al.  A computational algorithm for rock cutting optimisation from primary blocks , 2013 .

[17]  Y. Ozcelik.  Determination of the regions used as facing and building stone according to the material characteristics in an andesite quarry , 2011 .

[18]  Numerical Techniques for Block System Construction , 2007 .

[19]  Ove Stephansson,et al.  Fundamentals of discrete element methods for rock engineering , 2007 .

[20]  Raheb Bagherpour,et al.  How to determine the appropriate methods to identify the geometry of in situ rock blocks in dimension stones , 2015, Environmental Earth Sciences.

[21]  Mehmet Ölmez,et al.  An automated industrial conveyor belt system using image processing and hierarchical clustering for classifying marble slabs , 2011 .

[22]  Shen-Iuan Liu,et al.  CMOS exponential function generator , 2003 .

[23]  A. Niaz,et al.  Geotechnical study of marble, schist, and granite as dimension stone: a case study from parts of Lesser Himalaya, Neelum Valley Area, Azad Kashmir, Pakistan , 2015, Bulletin of Engineering Geology and the Environment.

[24]  Liguan Wang,et al.  A Methodology for Predicting the In Situ Size and Shape Distribution of Rock Blocks , 2003 .

[25]  R. Fort,et al.  Characterisation of monzogranitic batholiths as a supply source for heritage construction in the northwest of Madrid , 2010 .

[26]  A Feature Extraction Method for Marble Tile Classification , 2000 .

[27]  Richard E. Goodman,et al.  Block theory and its application to rock engineering , 1985 .

[28]  Yilmaz Ozcelik,et al.  Joint simulation of a building stone deposit using minimum/maximum autocorrelation factors , 2012 .

[29]  Luigi Sambuelli,et al.  Estimation of thin fracture aperture in a marble block by GPR sounding , 2010 .

[30]  Luís M.O. Sousa,et al.  Evaluation of joints in granitic outcrops for dimension stone exploitation , 2010 .

[31]  Jun Lu,et al.  Systematic identification of polyhedral rock blocks with arbitrary joints and faults , 2002 .

[32]  Giuseppe Cultrone,et al.  Evaluation of the petrophysical properties of sedimentary building stones in order to establish quality criteria , 2013 .

[33]  Y.S. Akgul,et al.  A generic system for the classification of marble tiles using Gabor filters , 2008, 2008 23rd International Symposium on Computer and Information Sciences.

[34]  C. Tse,et al.  Dimension stone: Exploration, evaluation and exploitation in southwest parts of Oban Massif Southeastern Nigeria , 2011 .

[35]  J. Martín-Martínez,et al.  Improvement in mechanical and structural integrity of natural stone by applying unsaturated polyester resin-nanosilica hybrid thin coating , 2008 .

[36]  John V. Smith.  Determining the size and shape of blocks from linear sampling for geotechnical rock mass classification and assessment , 2004 .

[37]  Dontireddy Venkat Reddy.  Evaluation of Natural Defects in Commercial Decorative Rock Deposits in Karnataka, India , 2002 .

[38]  S. Siegesmund,et al.  Black dimensional stones: geology, technical properties and deposit characterization of the dolerites from Uruguay , 2011 .

[39]  Yen-Chung Huang,et al.  1.5 V large-driving class-AB buffer amplifier with quiescent current control , 2004 .

[40]  Ángeles Saavedra,et al.  Evaluation of the quality of a granite quarry , 1999 .

[41]  N. Linde,et al.  Effective modeling of ground penetrating radar in fractured media using analytic solutions for propagation, thin-bed interaction and dipolar scattering , 2015, 1701.01353.

[42]  Leandro R. Alejano,et al.  Geometrical design of ornamental stone slabs cutting using the neutral region concept , 2012 .

[43]  Alparslan Turanboy,et al.  A geometric approach for natural rock blocks in engineering structures , 2010 .

[44]  I. Ashmole,et al.  DIMENSION STONE : THE LATEST TRENDS IN EXPLORATION AND PRODUCTION TECHNOLOGY , 2008 .

[45]  João Miguel da Costa Sousa,et al.  New Distance Measures Applied to Marble Classification , 2003, CIARP.

[46]  João Miguel da Costa Sousa,et al.  Comparison of Intelligent Classification Techniques Applied to Marble Classification , 2004, ICIAR.

[47]  Hannu Luodes,et al.  Exploration for dimensional stone — implications and examples from the Precambrian of southern Finland , 2000 .