Effectiveness of one-click feedback of building energy efficiency in supporting early-stage architecture design: An experimental study

Abstract As early-stage design decisions are critical to building energy efficiency, performance-oriented design supporting methods have been intensively investigated using various cutting-edge technologies. However, applying such methods in real design scenarios is rather limited, causing their actual effectiveness remains questionable. To address this problem, a design experiment is reported in this paper, where 41 designers conducted the early-stage design of an office building, first without, and then with the help of MOOSAS, a user-friendly tool providing rapid predictions of building energy efficiency. The results showed that after the use of MOOSAS, the energy efficiency of the design outcomes improved significantly, with the mean energy use intensity decreasing by 10%. Moreover, participants reached new design possibilities with higher energy efficiency during their design explorations, and had a better chance to choose the "optimal" or "near-optimal" design from their intermediate options. Other positive changes in the design process included a greater variety of design explorations, the achievement of an upward trend in energy efficiency, and more comprehensive coverage of the early-stage design subthemes. The questionnaire following the experiment showed that 76% of the participants regarded MOOSAS as effective or even very effective, whereas 56% claimed to use MOOSAS voluntarily in the future. It is further implied that a more hands-on educational approach in building science courses could be advantageous, while forming a culture of regarding building performance as architects' responsibility and using the supporting tools in the pre-design stage may benefit the design practice.

[1]  Wei Tian,et al.  Relationship between built form and energy performance of office buildings in a severe cold Chinese region , 2017 .

[2]  Optimization under Economic Uncertainty using a Net-Zero Energy Commercial Office Case-Study , 2015 .

[3]  Kyle Konis,et al.  Passive performance and building form: An optimization framework for early-stage design support , 2016 .

[4]  Shady Attia,et al.  Simulation-based decision support tool for early stages of zero-energy building design , 2012 .

[5]  Shady Attia,et al.  Selection criteria for building performance simulation tools: contrasting architects' and engineers' needs , 2012 .

[6]  Ertunga C. Özelkan,et al.  Bi-objective optimization of building enclosure design for thermal and lighting performance , 2015 .

[7]  Shady Attia,et al.  Design Decision Tool for Zero Energy Buildings , 2011 .

[8]  Di Wang,et al.  Application of multi-objective genetic algorithm to optimize energy efficiency and thermal comfort in building design , 2015 .

[9]  Jingyu Li,et al.  Reliability analysis of an energy-based form optimization of office buildings under uncertainties in envelope and occupant parameters , 2020 .

[10]  David Jason Gerber,et al.  Evolutionary energy performance feedback for design: Multidisciplinary design optimization and performance boundaries for design decision support , 2014 .

[11]  Xing Shi,et al.  Ineffectiveness of optimization algorithms in building energy optimization and possible causes , 2019 .

[12]  Luisa Caldas,et al.  Painting with light: An interactive evolutionary system for daylighting design , 2016 .

[13]  Clarice Bleil De Souza,et al.  Studies into the use of building thermal physics to inform design decision making , 2013 .

[14]  Sanjay R. Arwade,et al.  Structural Configuration and Building Energy Performance , 2013 .

[15]  Matthew J. Eckelman,et al.  Predictive modeling for US commercial building energy use: A comparison of existing statistical and machine learning algorithms using CBECS microdata , 2018 .

[16]  Paul Cooper,et al.  Understanding the risks and uncertainties introduced by common assumptions in energy simulations for Australian commercial buildings , 2014 .

[17]  Clarice Bleil De Souza,et al.  Contrasting paradigms of design thinking: the building thermal simulation tool user vs. the building designer , 2012 .

[18]  Mohamed El Mankibi,et al.  A knowledge-aid approach for designing high-performance buildings , 2013 .

[19]  Christoph F. Reinhart,et al.  Findings from a survey on the current use of daylight simulations in building design , 2006 .

[20]  C. Reinhart,et al.  DAYLIGHT FACTOR SIMULATIONS – HOW CLOSE DO SIMULATION BEGINNERS ‘ REALLY ’ GET ? , 2009 .

[21]  Ngoc-Tri Ngo.  Early predicting cooling loads for energy-efficient design in office buildings by machine learning , 2019, Energy and Buildings.

[22]  Lisa Guan,et al.  Building energy optimisation under uncertainty using ACOMV algorithm , 2018 .

[23]  Jie Liu,et al.  Improving auditorium designs with rapid feedback by integrating parametric models and acoustic simulation , 2016 .

[24]  Enedir Ghisi,et al.  Uncertainty analysis of user behaviour and physical parameters in residential building performance simulation , 2014 .

[25]  Tove Malmqvist,et al.  An approach towards sustainable renovation-A tool for decision support in early project stages , 2016 .

[26]  Jan Wienold,et al.  The daylighting dashboard – A simulation-based design analysis for daylit spaces , 2011 .

[27]  Moncef Krarti,et al.  Design optimization of energy efficient residential buildings in Tunisia , 2012 .

[28]  Christoph F. Reinhart,et al.  Learning by playing – teaching energy simulation as a game , 2012 .

[29]  P. Johnson-Laird.  How We Reason , 2006 .

[30]  Li Liu,et al.  Effect of geometric factors on the energy performance of high-rise office towers in Tianjin, China , 2017 .

[31]  Christoph F. Reinhart,et al.  Effects of real-time simulation feedback on design for visual comfort , 2019 .

[32]  Xin Zhou,et al.  Multi-objective optimization design of a complex building based on an artificial neural network and performance evaluation of algorithms , 2019, Adv. Eng. Informatics.

[33]  Emad Elbeltagi,et al.  Visualized strategy for predicting buildings energy consumption during early design stage using parametric analysis , 2017 .

[34]  Patrick Janssen,et al.  Multi-objective optimisation of building form, envelope and cooling system for improved building energy performance , 2018, Automation in Construction.

[35]  Lingling Zhang,et al.  Shape optimization of free-form buildings based on solar radiation gain and space efficiency using a multi-objective genetic algorithm in the severe cold zones of China , 2016 .

[36]  Shuai Lu,et al.  Investigation on the potential of improving daylight efficiency of office buildings by curved facade optimization , 2020 .

[37]  Athanasios Tzempelikos,et al.  Sensitivity analysis on daylighting and energy performance of perimeter offices with automated shading , 2013 .

[38]  Salvatore Carlucci,et al.  Assessing gaps and needs for integrating building performance optimization tools in net zero energy buildings design , 2013 .

[39]  Xing Shi,et al.  Towards adoption of building energy simulation and optimization for passive building design: A survey and a review , 2018 .

[40]  Ziwei Li,et al.  A graph- and feature-based building space recognition algorithm for performance simulation in the early design stage , 2018 .

[41]  Anh Tuan Nguyen,et al.  A performance comparison of multi-objective optimization algorithms for solving nearly-zero-energy-building design problems , 2016 .

[42]  S. Ranji Ranjithan,et al.  Multivariate regression as an energy assessment tool in early building design , 2012 .

[43]  Ziwei Li,et al.  An ANN-based fast building energy consumption prediction method for complex architectural form at the early design stage , 2019, Building Simulation.

[44]  P Pieter-Jan Hoes,et al.  On the sensitivity to different aspects of occupant behaviour for selecting the appropriate modelling complexity in building performance predictions , 2017 .

[45]  Shuai Lu,et al.  The Influence of Shape Design on the Acoustic Performance of Concert Halls from the Viewpoint of Acoustic Potential of Shapes , 2016 .

[46]  Kristoffer Negendahl,et al.  Building performance simulation in the early design stage: An introduction to integrated dynamic models , 2015 .

[47]  Rasmus Lund Jensen,et al.  Building simulations supporting decision making in early design – A review , 2016 .