The effect of hardwood component on grapple skidder and stroke delimber idle time and productivity - An agent based model

We modeled the interaction between grapple skidder and stroke delimber.We developed an agent-based model using the NetLogo software.Hardwood component does not affect machine idle time under average conditions.Hardwood component has no effect on system productivity under average conditions.System productivity is most sensitive to bunch size and skidding distance. The forest industry is a capital intensive business and therefore high efficiency in management and forest operations is a must. Maine has millions of acres of forest stands with tree diameters smaller than 30cm. The harvest productivity in such stands is low compared to stands with larger diameter trees. A recent harvest productivity study in Maine identified operational constraints for whole tree harvest systems, but efforts to improve active operations would be expensive and time consuming. A common practice to reduce costs and time consumption is to develop simulation models and implement new ideas within them. We developed a production efficiency model that leverages an agent-based modeling approach. The model is based on the interaction of two common forest machines (grapple skidder and stroke delimber) and incorporates empirical cycle time estimates from research in Maine. Three scenarios have been developed to investigate baseline conditions, and two GPS and GIS aided communication improvements. The goal of this paper is to document a new agent based model and to investigate the effect of hardwood component on machine idle time and productivity. Results showed that system productivity was affected by skidding distance, bunch spacing, and removal intensity. An increase in hardwood component led to a decrease in stroke delimber idle time but did not affect grapple skidder idle time. Further, hardwood component did not affect system productivity, and none of the three single-skidder scenarios tested performed any better than another. We validated the model by conducting a sensitivity analysis to confirm previous research results. The modeled waiting times are well within the range of observed values and therefore suggest that this model is accurate and well calibrated. Our conclusions are that when operating under average harvesting conditions there is no loss in productivity due to a change in hardwood component and that a stroke delimber idle time of 40% or more is unavoidable unless the stroke delimber can work independently. Future applications of this model may target specific production forestry conditions.

[1]  Andreas Huth,et al.  Multicriteria evaluation of simulated logging scenarios in a tropical rain forest. , 2004, Journal of environmental management.

[2]  Robert S. Seymour,et al.  Regional stem taper equations for eleven conifer species in the Acadian Region of North America: development and assessment. , 2012 .

[3]  Bruce R. Hartsough,et al.  Productivity standards for harvesters and processors in Italy. , 2010 .

[4]  Frank Thomas Purfürst,et al.  Learning Curves of Harvester Operators , 2010 .

[5]  Bryce J. Stokes,et al.  Nondestructive evaluation for detection of honeycomb in the sawmill: an economic analysis , 1997 .

[6]  Patrick Hiesl,et al.  A multi-stem feller-buncher cycle-time model for partial harvest of small-diameter wood stands , 2013 .

[7]  Kathleen P. Bell,et al.  Agent-Based Modeling of Harvest Decisions by Small Scale Forest Landowners in Maine, USA , 2013 .

[8]  U. Berger,et al.  Simulating harvesting scenarios towards the sustainable use of mangrove forest plantations , 2011, Wetlands Ecology and Management.

[9]  Dan Glade,et al.  Single- and Double-Grip Harvesters – Productive Measurements in Final Cutting of Shelterwood , 2013 .

[10]  A. Borshchev,et al.  From System Dynamics and Discrete Event to Practical Agent Based Modeling : Reasons , Techniques , Tools , 2004 .

[11]  Birgit Müller,et al.  A standard protocol for describing individual-based and agent-based models , 2006 .

[12]  T. Spies,et al.  An Individual-Based Process Model to Simulate Landscape-Scale Forest Ecosystem Dynamics , 2012 .

[13]  Joshua M. Epstein.  Agent-based computational models and generative social science , 1999 .

[14]  Jingxin Wang,et al.  Production and cost analysis of a feller-buncher and grapple skidder in central Appalachian hardwood forests , 2004 .

[15]  Chris B. LeDoux,et al.  Estimating and Validating Ground-Based Timber Harvesting Production Through Computer Simulation , 2003 .

[16]  Ali Bazghandi,et al.  Techniques, Advantages and Problems of Agent Based Modeling for Traffic Simulation , 2012 .

[17]  Han-Sup Han,et al.  Productivity and cost of cut-to-length and whole-tree harvesting in a mixed-conifer stand , 2007 .

[18]  Patrick Hiesl,et al.  Applicability of International Harvesting Equipment Productivity Studies in Maine, USA: A Literature Review , 2013 .

[19]  Han-Sup Han,et al.  Economic feasibility of an integrated harvesting system for small-diameter trees in Southwest Idaho , 2004 .

[20]  R Core Team,et al.  R: A language and environment for statistical computing. , 2014 .

[21]  Joe Mcneel,et al.  Production economics of harvesting small-diameter hardwood stands in central Appalachia , 2006 .

[22]  Chris B. LeDoux,et al.  Estimating and validating harvesting system production through computer simulation , 1993 .

[23]  John P. Caspersen,et al.  A selection harvesting algorithm for use in spatially explicit individual-based forest simulation models , 2008 .

[24]  Karl Stampfer,et al.  Utilization Rates and Cost Factors in Timber Harvesting Based on Long-term Machine Data , 2011 .

[25]  Patrick Hiesl,et al.  Estimating Processing Times of Harvesters in Thinning Operations in Maine , 2015 .

[26]  B. Andersson,et al.  Harvesting overmature aspen stands in Central Alberta , 1996 .

[27]  J. Gareth Polhill,et al.  The ODD protocol: A review and first update , 2010, Ecological Modelling.