An analytical dishing and step height reduction model for chemical mechanical planarization (CMP)

An analytical model for dishing and step height reduction in chemical mechanical planarization (CMP) is presented. The model is based on the assumption that at the feature scale, high areas on the wafer experience higher pressure than low areas. A Prestonian material removal model is assumed. The model delineates how dishing and step height reduction depend on slurry properties (selectivity and Preston's constants), pad characteristics (stiffness and bending ability), polishing conditions (pressure, relative velocity and overpolishing) and wafer surface geometry (linewidth, pitch and pattern density). Model predictions are in good agreement with existing experimental observations. The present model facilitates understanding of the CMP process at the feature scale. Based on the proposed model, design avenues for decreasing dishing and increasing the speed of step height reduction may be explored through modification of appropriate parameters for slurry, pad and polishing conditions. The proposed model may also be used as a design tool for pattern layout to optimize the performance of the CMP process.

[1]  Duane S. Boning,et al.  A CMP MODEL COMBINING DENSITY AND TIME DEPENDENCIES , 1999 .

[2]  Joost J. Vlassak,et al.  A Contact-Mechanics Based Model for Dishing and Erosion in Chemical-Mechanical Polishing , 2001 .

[3]  Vimal Desai,et al.  Electrochemical characterization of copper chemical mechanical polishing , 2003 .

[4]  J. Greenwood,et al.  The Elastic Contact of Rough Spheres , 1967 .

[5]  Duane S. Boning,et al.  PATTERN AND PROCESS DEPENDENCIES IN COPPER DAMASCENE CHEMICAL MECHANICAL POLISHING PROCESSES , 1998 .

[6]  Nannaji Saka,et al.  Mechanisms of the Chemical Mechanical Polishing (CMP) Process in Integrated Circuit Fabrication , 2001 .

[7]  Karey Holland,et al.  Cu CMP with orbital technology: summary of the experience , 1998, IEEE/SEMI 1998 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop (Cat. No.98CH36168).

[8]  J. Warnock,et al.  A two-dimensional process model for chemimechanical polish planarization , 1991 .

[9]  P. Woerlee,et al.  Modelling of dishing for metal chemical mechanical polishing , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[10]  Bernd Ebersberger,et al.  Tungsten Chemical Mechanical Polishing , 1998 .

[11]  Duane S. Boning,et al.  Modeling of Reverse Tone Etchback Shallow Trench Isolation Chemical Mechanical Polishing , 2001 .

[12]  Scott R. Runnels,et al.  Advances in physically based erosion simulators for CMP , 1996 .

[13]  K. Drescher,et al.  Influence of process parameters on chemical-mechanical polishing of copper , 1998, European Workshop Materials for Advanced Metallization,.

[14]  Leon M Keer,et al.  Wear‐Contact Problems and Modeling of Chemical Mechanical Polishing , 1998 .

[15]  Dar-Zen Chen,et al.  Pattern Planarization Model of Chemical Mechanical Polishing , 1999 .

[16]  Scott G. Meikle,et al.  Modeling of Chemical Mechanical Polishing Processes Using a Discretized Geometry Approach , 2000 .

[17]  D. Boning,et al.  A MATHEMATICAL MODEL OF PATTERN DEPENDENCIES IN Cu CMP PROCESSES , 1999 .

[18]  Kapila Wijekoon,et al.  Copper CMP integration and time dependent pattern effect , 1999, Proceedings of the IEEE 1999 International Interconnect Technology Conference (Cat. No.99EX247).