Reducing dust effects on photovoltaic panels by hydrophobic coating

This work aims at developing reliable solar technologies for regions characterized by hot climate and with high dust density, which are considered as significant constraints to the development of high-performance photovoltaic systems in the Middle East and North Africa (MENA) regions. After reviewing actual technologies to solve these issues in MENA region, where water is considered a precious resource, a proposal to apply a nanocoating on photovoltaic panels in a simple and cost-effective way is examined. Experimentations realized under control of optical and electrical benches revealed a considerable gain in light transmission and open circuit voltage, respectively. A thermoelectric analysis demonstrated that nanocoated photovoltaic (PV) modules are running cooler than untreated ones. This behavior is due to hot spot caused by shading effects of dusts in case of uncoated PV panels. The tested hydrophobic coating layer reduces these issues and solves the problems of dust and electrical losses.

[1]  F. Cucchiella,et al.  Residential photovoltaic plant: environmental and economical implications from renewable support policies , 2015, Clean Technologies and Environmental Policy.

[2]  N. Gorji,et al.  Modeling of temperature profile, thermal runaway and hot spot in thin film solar cells , 2016 .

[3]  Deutsche Gesellschaft für Sonnenenergie.  Planning and Installing Photovoltaic Systems : A Guide for Installers, Architects and Engineers , 2013 .

[4]  Martin A. Green,et al.  Crystalline Silicon Solar Cells , 2015 .

[5]  Abdulaziz Baras,et al.  Optimized Cleaning Cost and Schedule Based on Observed Soiling Conditions for Photovoltaic Plants in Central Saudi Arabia , 2016, IEEE Journal of Photovoltaics.

[6]  James R. Gaier,et al.  Aeolian Removal of Dust Types From Photovoltaic Surfaces on Mars , 2022 .

[7]  K. W. Böer.  Handbook of the Physics of Thin-Film Solar Cells , 2014 .

[8]  Zelun Li,et al.  Review of Self-Cleaning Method for Solar Cell Array , 2011 .

[9]  G. M. Crisci,et al.  Nano-TiO2 coatings for cultural heritage protection: The role of the binder on hydrophobic and self-cleaning efficacy , 2016 .

[10]  Aránzazu Fernández-García,et al.  Study of different cleaning methods for solar reflectors used in CSP plants , 2014 .

[11]  Yu-Chih Lin.  Applying Ag–TiO2/functional filter for abating odor exhausted from semiconductor and opti-electronic industries , 2013, Clean Technologies and Environmental Policy.

[12]  H. Kawamoto,et al.  Electrostatic cleaning system for removal of sand from solar panels , 2013, 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC).

[13]  Xiaodong Wang,et al.  High-Efficiency Solar Cells: Physics, Materials, and Devices , 2014 .

[14]  Zeki Ahmed Darwish,et al.  Effect of dust pollutant type on photovoltaic performance , 2015 .

[15]  N. Bai,et al.  A versatile approach for preparing self-recovering superhydrophobic coatings , 2016 .

[16]  Arne Schneck.  Bounds for optimization of the reflection coefficient by constrained optimization in hardy spaces , 2009 .

[17]  S. M. Sze,et al.  Physics of semiconductor devices , 1969 .

[18]  Lin Yao,et al.  Recent progress in antireflection and self-cleaning technology – From surface engineering to functional surfaces , 2014 .

[19]  A. Nazari,et al.  Statistical optimization of self-cleaning technology and color reduction in wool fabric by nano zinc oxide and eco-friendly cross-linker , 2015, Clean Technologies and Environmental Policy.

[20]  Tony Sample,et al.  Long-term soiling of silicon PV modules in a moderate subtropical climate , 2016 .

[21]  On the aerosols monitoring by satellite observations , 2008 .

[22]  Moncef Krarti,et al.  Evaluation of net-zero energy residential buildings in the MENA region , 2016 .

[23]  W. Barthlott,et al.  Purity of the sacred lotus, or escape from contamination in biological surfaces , 1997, Planta.

[24]  D. Giolando.  Transparent self-cleaning coating applicable to solar energy consisting of nano-crystals of titanium dioxide in fluorine doped tin dioxide , 2016 .

[25]  Mohd Amran Mohd Radzi,et al.  Power loss due to soiling on solar panel: A review , 2016 .

[26]  S. M. Sze.  Physics of semiconductor devices /2nd edition/ , 1981 .

[27]  S. Fatemi,et al.  Modification of nano-TiO2 by doping with nitrogen and fluorine and study acetaldehyde removal under visible light irradiation , 2014, Clean Technologies and Environmental Policy.

[28]  James R. Gaier,et al.  Effect of particle size of Martian dust on the degradation of photovoltaic cell performance , 1991 .

[29]  R. B. Williams,et al.  Vibration Characterization of Self-Cleaning Solar Panels with Piezoceramic Actuation , 2007 .

[30]  Hans J. Solheim,et al.  Measurement and Simulation of Hot Spots in Solar Cells , 2013 .

[31]  Zong-Liang Yang,et al.  Diagnostic evaluation of the Community Earth System Model in simulating mineral dust emission with insight into large-scale dust storm mobilization in the Middle East and North Africa (MENA) , 2016 .

[32]  Vanessa R. M. Rodrigues,et al.  Self-cleaning superhydrophobic surfaces with underwater superaerophobicity , 2016 .

[33]  Roel Snieder,et al.  A Guided Tour of Mathematical Methods: For the Physical Sciences , 2001 .

[34]  Mazen Abdel-Salam,et al.  Performance of a PV module integrated with standalone building in hot arid areas as enhanced by surface cooling and cleaning , 2015 .

[35]  M. Paranthaman,et al.  Semiconductor Materials for Solar Photovoltaic Cells , 2016 .