Acoustic Wind Tunnel Test with 18% Scale Half-span Model toward FQUROH Second Flight Demonstration

[1]  Yasushi Ito,et al.  Noise Reduction Design for Flap Side-edges toward FQUROH Second Flight Demonstration , 2017, 2018 AIAA/CEAS Aeroacoustics Conference.

[2]  Ryotaro Sakai,et al.  FQUROH: A Flight Demonstration Project for Airframe Noise Reduction Technology – the 2nd Flight Demonstration , 2017, 2018 AIAA/CEAS Aeroacoustics Conference.

[3]  Kazuomi Yamamoto,et al.  Airframe Noise Reduction of Flap Side-edge Using Vortex Generators , 2017 .

[4]  Kazuomi Yamamoto,et al.  Noise Reduction Design for Landing Gear toward FQUROH Flight Demonstration , 2017 .

[5]  Ryotaro Sakai,et al.  Flyover Array Measurements with JAXA Flying Test Bed ‘Hisho’ , 2016 .

[6]  Kazuomi Yamamoto,et al.  FQUROH: a Flight Demonstration Project for Airframe Noise Reduction Technology - Concept and Current Status , 2016 .

[7]  Shigemi Shindo,et al.  Noise Generation Characteristics of a High-lift Swept and Tapered Wing Model , 2013 .

[8]  Kazuomi Yamamoto,et al.  An Aerodynamic Noise Reduction Study for Airframe Noise from Flap Tips , 2013 .

[9]  Kazuomi Yamamoto,et al.  Numerical Investigation on Change of Airframe Noise by Flap Side-edge Shape , 2013 .

[10]  Tatsuya Ishii,et al.  High-resolution Fly-over Beamforming Using a Small Practical Array , 2012 .

[11]  Kazuomi Yamamoto,et al.  Experimental study on Noise Generation of a Two-Wheel Main Landing Gear , 2010 .

[12]  T. Imamura,et al.  A Far-field Noise and Near-field Unsteadiness of a Simplified High-lift-configuration Model (Flap-edge) , 2009 .

[13]  Mehdi R. Khorrami,et al.  Airframe Noise Results from the QTD II Flight Test Program , 2007 .

[14]  Tatsuo Maeda,et al.  RTRI's Large-scale Low-noise Wind Tunnel and Wind Tunnel Tests , 2001 .