An evaluation of off-axis manual forces and upper extremity joint moments during unilateral pushing and pulling exertions

Abstract This study quantified changes in off-axis manual force production and upper extremity joint moments during sub-maximal one-handed push and pull tasks. Off-axis forces in the up/down and left/right directions were quantified in the presence or absence of constraints placed upon the direction of manual force application and/or arm posture. Resultant off-axis forces of 13.1% and 9.4% were produced for pulls and pushes, respectively. Off-axis forces during pulling were oriented downwards and to the right and were associated with a decreased should flexion moment when posture was constrained. Off-axis forces in the up/down direction were minimized with increased on-axis force level. Off-axis forces during pushing tended to be oriented to the left and were associated with increased elbow flexion moment when off-axis forces were allowed. By not accounting for these off-axis forces, we may not be accurately reflecting actionable muscle- and joint-level loading characteristics derived from biomechanically-based proactive ergonomics assessment approaches. Practitioner Summary: Constrained arm postures and directions of manual force application influence the production of off-axis forces. As inaccurate estimation of true manual forces can markedly influence actionable outcomes of proactive ergonomic assessments, this study suggests that simplification of these estimates is insufficient and potentially misleading.

[1]  Carlo J. De Luca,et al.  The Use of Surface Electromyography in Biomechanics , 1997 .

[2]  P. Leva.  Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters. , 1996 .

[3]  A Garg,et al.  Revised NIOSH equation for the design and evaluation of manual lifting tasks. , 1993, Ergonomics.

[4]  A J van der Beek,et al.  Pushing and pulling in association with low back and shoulder complaints , 2002, Occupational and environmental medicine.

[5]  Nicholas J. La Delfa,et al.  The 'Arm Force Field' method to predict manual arm strength based on only hand location and force direction. , 2017, Applied ergonomics.

[6]  Monique Lortie,et al.  The handling of objects other than boxes: univariate analysis of handling techniques in a large transport company. , 1995, Ergonomics.

[7]  Don B Chaffin,et al.  The relationship between shoulder torques and the perception of muscular effort in loaded reaches , 2006, Ergonomics.

[8]  Nicholas J La Delfa,et al.  Equations to predict female manual arm strength based on hand location relative to the shoulder , 2014, Ergonomics.

[9]  Clark R Dickerson,et al.  Estimating maximum and psychophysically acceptable hand forces using a biomechanical weakest link approach , 2014, Computer methods in biomechanics and biomedical engineering.

[10]  D W Grieve,et al.  Relationships between one-handed force exertions in all directions and their associated postures. , 1995, Clinical biomechanics.

[11]  Kevin P. Granata,et al.  Low-Back Biomechanics and Static Stability During Isometric Pushing , 2005, Hum. Factors.

[12]  I Kingma,et al.  Force direction and physical load in dynamic pushing and pulling , 2000, Ergonomics.

[13]  R A Haslam,et al.  Initial force and postural adaptations when pushing and pulling on floor surfaces with good and reduced resistance to slipping , 2006, Ergonomics.

[14]  Thomas J Armstrong,et al.  Biomechanical analysis for handle stability during maximum push and pull exertions , 2009, Ergonomics.

[15]  D. Chaffin,et al.  Digital human modeling for computer-aided ergonomics , 2005 .

[16]  Christine M Haslegrave,et al.  Ready steady push – a study of the role of arm posture in manual exertions , 2008, Ergonomics.

[17]  Matthew P. Reed,et al.  Postural Behaviors during One-Hand Force Exertions , 2008 .

[18]  Gert S. Faber,et al.  Cart pushing: The effects of magnitude and direction of the exerted push force, and of trunk inclination on low back loading , 2007 .

[19]  D. Chaffin,et al.  A proposed standard procedure for static muscle strength testing. , 1974, American Industrial Hygiene Association journal.

[20]  Bradley S Joseph,et al.  Corporate ergonomics programme at Ford Motor Company. , 2003, Applied ergonomics.

[21]  Nicholas J La Delfa,et al.  Multidirectional manual arm strength and its relationship with resultant shoulder moment and arm posture , 2016, Ergonomics.

[22]  Andy P. Field,et al.  Discovering Statistics Using Ibm Spss Statistics , 2017 .

[23]  M. Frings-Dresen,et al.  Pushing and pulling in relation to musculoskeletal disorders: a review of risk factors. , 1998, Ergonomics.

[24]  S T Pheasant,et al.  Naturally preferred directions for the exertion of maximal manual forces. , 1981, Ergonomics.

[25]  D B Chaffin,et al.  Ergonomics guide for the assessment of human static strength. , 1975, American Industrial Hygiene Association journal.

[26]  Steven Fischer,et al.  A biomechanical investigation into the link between simulated job static strength and psychophysical strength: Do they share a “weakest link” relationship? , 2011 .

[27]  Don B Chaffin,et al.  A mathematical musculoskeletal shoulder model for proactive ergonomic analysis , 2007, Computer methods in biomechanics and biomedical engineering.

[28]  Spss,et al.  Discovering Statistics (4th Edition ed. , 2013 .

[29]  H. Charles Dischinger.  Digital Human Modeling , 2008, Lecture Notes in Computer Science.

[30]  Matthew P Reed,et al.  A study of the difference between nominal and actual hand forces in two-handed sagittal plane whole-body exertions , 2011, Ergonomics.

[31]  Maury A. Nussbaum,et al.  Heuristics for locating upper extremity joint centres from a reduced set of surface markers , 2000 .

[32]  J. H. Andersen,et al.  Risk factors for more severe regional musculoskeletal symptoms: a two-year prospective study of a general working population. , 2007, Arthritis and rheumatism.

[33]  R. Ostelo,et al.  Long-term patterns of chronic complaints of the arms, neck, and shoulders and their determinants—the Doetinchem Cohort Study , 2016, Pain.

[34]  Domenic V. Cicchetti,et al.  Extension of multiple-range tests to interaction tables in the analysis of variance: A rapid approximate solution. , 1972 .

[35]  J. P. Morgan,et al.  Design and Analysis: A Researcher's Handbook , 2005, Technometrics.

[36]  Bryan Buchholz,et al.  ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion--Part II: shoulder, elbow, wrist and hand. , 2005, Journal of biomechanics.