Carriage Error Identification Based on Cross-Correlation Analysis and Wavelet Transformation

This paper proposes a novel method for identifying carriage errors. A general mathematical model of a guideway system is developed, based on the multi-body system method. Based on the proposed model, most error sources in the guideway system can be measured. The flatness of a workpiece measured by the PGI1240 profilometer is represented by a wavelet. Cross-correlation analysis performed to identify the error source of the carriage. The error model is developed based on experimental results on the low frequency components of the signals. With the use of wavelets, the identification precision of test signals is very high.

[1]  Heui Jae Pahk,et al.  Development of straightness measurement technique using the profile matching method , 1997 .

[2]  Wei Gao,et al.  A three-probe system for measuring the parallelism and straightness of a pair of rails for ultra-precision guideways , 2007 .

[3]  Wen-Yuh Jywe,et al.  A new 2D error separation technique for performance tests of CNC machine tools , 2007 .

[4]  Wei Gao,et al.  Measurement and compensation of error motions of a diamond turning machine , 2007 .

[5]  Albert Albers,et al.  Computer aided optimization of the static and dynamic properties of parallel kinematics , 2002 .

[6]  J. B. French,et al.  Level-density fluctuations and two-body versus multi-body interactions☆ , 1972 .

[7]  W Knapp.  Straightness Measurement for Long Movements , 2005 .

[8]  Stephen C. Veldhuis,et al.  Modelling geometric and thermal errors in a five-axis cnc machine tool , 1995 .

[9]  J.R.R. Mayer,et al.  Investigation of accuracy of aerostatic guideways , 2009 .

[10]  Yoshiaki Kakino,et al.  The Measurement of Motion Errors of NC Machine Tools and Diagnosis of their Origins by Using Telescoping Magnetic Ball Bar Method , 1987 .

[11]  J. W. Humberston.  Classical mechanics , 1980, Nature.

[12]  Anthony P. Reynolds,et al.  Use and Verification of Digital Image Correlation for Automated 3-D Surface Characterization in the Scanning Electron Microscope , 1999 .

[13]  J.R.R. Mayer,et al.  Relationships between straightness and angular kinematic errors in machines , 2007 .

[14]  H. C. Corben,et al.  Classical Mechanics (2nd ed.) , 1961 .

[15]  William H. Press,et al.  Numerical recipes , 1990 .

[16]  I. Daubechies.  Orthonormal bases of compactly supported wavelets , 1988 .

[17]  Wojciech Wieleba,et al.  The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardness , 2002 .

[18]  Yoshiaki Kakino,et al.  A study on the motion accuracy of NC machine tools. (5th report). Diagnosis of angular motion error origins. , 1989 .