Two-Layer Linear MPC Approach Aimed at Walking Beam Billets Reheating Furnace Optimization

In this paper, the problem of the control and optimization of a walking beam billets reheating furnace located in an Italian steel plant is analyzed. An ad hoc Advanced Process Control framework has been developed, based on a two-layer linear Model Predictive Control architecture. This control block optimizes the steady and transient states of the considered process. Two main problems have been addressed. First, in order to manage all process conditions, a tailored module defines the process variables set to be included in the control problem. In particular, a unified approach for the selection on the control inputs to be used for control objectives related to the process outputs is guaranteed. The impact of the proposed method on the controller formulation is also detailed. Second, an innovative mathematical approach for stoichiometric ratios constraints handling has been proposed, together with their introduction in the controller optimization problems. The designed control system has been installed on a real plant, replacing operatorsź mental model in the conduction of local PID controllers. After two years from the first startup, a strong energy efficiency improvement has been observed.

[1]  C. R. Cutler,et al.  Dynamic matrix control¿A computer control algorithm , 1979 .

[2]  Yucai Zhu,et al.  Multivariable System Identification For Process Control , 2001 .

[3]  Anders Mårtensson.  Energy Efficiency Improvement by Measurement and Control. A Case Study of Reheating Furnaces in the Steel Industry , 1992 .

[4]  Marko Bacic,et al.  Model predictive control , 2003 .

[5]  Ian K. Craig,et al.  Economic assessment of advanced process control – A survey and framework , 2008 .

[6]  Tae Woong Yoon,et al.  Modeling and predictive control of a reheating furnace , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[7]  M. Soroush,et al.  Model Predictive Control Tuning Methods: A Review , 2010 .

[8]  S. Joe Qin,et al.  A survey of industrial model predictive control technology , 2003 .

[9]  De-Wei Li,et al.  Model Predictive Control-Status and Challenges: Model Predictive Control-Status and Challenges , 2014 .

[10]  Andreas Kugi,et al.  Feedback Tracking Control of Continuous Reheating Furnaces , 2011 .

[11]  B. Leden,et al.  A Control System for Fuel Optimization of Reheating Furnaces , 2011 .

[12]  Silvia Maria Zanoli,et al.  Application of Advanced Process Control techniques to a pusher type reheating furnace , 2015 .

[13]  Tao Liu,et al.  A tutorial review on process identification from step or relay feedback test , 2013 .

[14]  Yi Zheng,et al.  Hot-rolled strip laminar cooling process plant-wide temperature monitoring and control , 2013 .

[15]  Jan M. Maciejowski,et al.  Predictive control : with constraints , 2002 .

[16]  Andreas Kugi,et al.  Nonlinear model predictive control of a continuous slab reheating furnace , 2013 .

[17]  James B. Rawlings,et al.  Model Predictive Control , 2012 .

[18]  M.J. Grimble,et al.  Nonlinear predictive control of steel slab reheating furnace , 2008, 2008 American Control Conference.

[19]  Tianyou Chai,et al.  Hybrid optimization setpoint strategy for slab reheating furnace temperature , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[20]  Silvia Maria Zanoli,et al.  A two-layer model predictive control system with adaptation to variables status values , 2016, 2016 17th International Carpathian Control Conference (ICCC).

[21]  Silvia Maria Zanoli,et al.  The importance of cooperation and consistency in two-layer Model Predictive Control , 2016, 2016 17th International Carpathian Control Conference (ICCC).

[22]  Michael Nikolaou,et al.  MPC: Current practice and challenges , 2012 .

[23]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .