Characterization of spark plasma sintered TiC–Si3N4 ceramics

[1]  Seyed Ali Delbari,et al.  Effects of discrete and simultaneous addition of SiC and Si3N4 on microstructural development of TiB2 ceramics , 2021, Ceramics International.

[2]  A. H. Korayem,et al.  Effect of chemistry and geometry of GO nanochannels on the Li ion selectivity and recovery , 2020 .

[3]  T. Matsuda.  Synthesis and sintering of TiC-TiB2 composite powders , 2020 .

[4]  Ho Won Jang,et al.  A novel TiC-based composite co-strengthened with AlN particulates and graphene nano-platelets , 2020 .

[5]  L. Olmos,et al.  Tribocorrosion behavior of Spark Plasma Sintering TiC reinforced Ti-based composites , 2020 .

[6]  Seyed Ali Delbari,et al.  Physical, mechanical and microstructural characterization of TiC–ZrN ceramics , 2020 .

[7]  M. Bazli,et al.  Concrete filled FRP–PVC tubular columns used in the construction sector: A review , 2020, Journal of Composites and Compounds.

[8]  F. Gracia,et al.  Tuning of metal oxides photocatalytic performance using Ag nanoparticles integration , 2020 .

[9]  H. Kwon,et al.  Effects of Ni content and sintering temperature on the microstructure and mechanical properties of TiC-Ni composites fabricated by selective carburization of Ti-Ni alloys , 2020 .

[10]  M. Irani,et al.  Simultaneous linear release of Folic acid and Doxorubicin from ethyl cellulose/chitosan/g-C3 N4 /MoS2 core-shell nanofibers and its anticancer properties. , 2020, Journal of biomedical materials research. Part A.

[11]  Seyed Ali Delbari,et al.  Microstructural and mechanical characterization of spark plasma sintered TiC ceramics with TiN additive , 2020 .

[12]  Seyed Ali Delbari,et al.  A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics , 2020 .

[13]  Seyed Ali Delbari,et al.  Strengthening of novel TiC–AlN ceramic with in-situ synthesized Ti3Al intermetallic compound , 2020 .

[14]  A. Dehghan,et al.  Ni-Cu matrix composite reinforced with CNTs: preparation, characterization, wear and corrosion behavior, inhibitory effects , 2020, Journal of Composites and Compounds.

[15]  Shima Nasibi,et al.  TZNT alloy for surgical implant applications: A Systematic Review , 2020, Journal of Composites and Compounds.

[16]  Yong Du,et al.  Densification, microstructure and mechanical performance of TiC/Fe composites by spark plasma sintering , 2020 .

[17]  R. Soltani,et al.  In-situ electro-generation and activation of hydrogen peroxide using a CuFeNLDH-CNTs modified graphite cathode for degradation of cefazolin. , 2020, Journal of Environmental Management.

[18]  N. P. Vafa,et al.  Characterization of TaC-based fibrous-monolithic ceramics made of fibers with different core/shell volume ratios and orientations , 2020 .

[19]  Mehdi Shahedi Asl,et al.  Solid solution formation during spark plasma sintering of ZrB2–TiC–graphite composites , 2020 .

[20]  A. Moghanian,et al.  Novel antibacterial Cu/Mg‐substituted 58S‐bioglass: Synthesis, characterization and investigation of in vitro bioactivity , 2020 .

[21]  Hassan Karimi-Maleh,et al.  Electrochemical Sensors, a Bright Future in the Fabrication of Portable Kits in Analytical Systems. , 2019, Chemical record.

[22]  N. Chiker,et al.  Spark Plasma Sintering and tribological behavior of Ti3SiC2–Ti5Si3–TiC composites , 2019 .

[23]  M. Irani,et al.  Sol–gel derived SnO2/Ag2O ceramic nanocomposite for H2 gas sensing applications , 2019, Materials Research Express.

[24]  V. Vatanpour,et al.  A review on the applications of ultrasonic technology in membrane bioreactors. , 2019, Ultrasonics sonochemistry.

[25]  Leila Bazli,et al.  A Review of Carbon nanotube/TiO2 Composite prepared via Sol-Gel method , 2019, Journal of Composites and Compounds.

[26]  Seyed Ali Delbari,et al.  Hybrid Ti matrix composites with TiB2 and TiC compounds , 2019, Materials Today Communications.

[27]  M. G. Kakroudi,et al.  Investigation of AlN addition on the microstructure and mechanical properties of TiB2 ceramics , 2019, Ceramics International.

[28]  H. Karimi-Maleh,et al.  3D reduced graphene oxide/FeNi3-ionic liquid nanocomposite modified sensor; an electrical synergic effect for development of tert-butylhydroquinone and folic acid sensor , 2019, Composites Part B: Engineering.

[29]  M. Yousefpour,et al.  Microstructure and mechanical properties of an ultrafine grained Ti5Si3-TiC composite fabricated by spark plasma sintering , 2019, Advanced Powder Technology.

[30]  Mehdi Shahedi Asl,et al.  Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC , 2019, Ceramics International.

[31]  A. Abbaspourrad,et al.  A novel electrochemical epinine sensor using amplified CuO nanoparticles and an-hexyl-3-methylimidazolium hexafluorophosphate electrode , 2019, New Journal of Chemistry.

[32]  H. Baharvandi,et al.  Investigation of strength, fracture toughness, and crack propagation pattern of TaC-based fibrous monoliths as a function of microstructure architecture , 2019, International Journal of Refractory Metals and Hard Materials.

[33]  C. J. Tyne,et al.  Synthesis of TiC reinforced Ti matrix composites by spark plasma sintering and electric discharge sintering: A comparative assessment of microstructural and mechanical properties , 2019, Ceramics International.

[34]  Yu Zhou,et al.  Microstructure and mechanical properties of TiB2-40 wt% TiC composites: Effects of adding a low-temperature hold prior to sintering at high temperatures , 2018, Ceramics International.

[35]  D. Bučevac,et al.  Mechanical properties of reaction sintered SiC-TiC composite , 2018, Ceramics International.

[36]  M. G. Kakroudi,et al.  Fracture behavior improvement of TaC-based ceramic composites by fibrous structure , 2018 .

[37]  G. Goller,et al.  Spark plasma sintered ZrC-TiC-GNP composites: Solid solution formation and mechanical properties , 2018 .

[38]  S. Henschel,et al.  Fracture toughness of a hot work tool steel-TiC composite produced by mechanical milling and spark plasma sintering , 2018 .

[39]  S. Hong,et al.  In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering , 2017, Journal of Materials Science & Technology.

[40]  M. G. Kakroudi,et al.  Consolidation and mechanical properties of hot pressed TaC-HfC-VC composites , 2017 .

[41]  A. H. Korayem,et al.  Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures , 2017 .

[42]  Wenchao Yang,et al.  Microstructural and mechanical characterization of in-situ TiC/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction , 2017 .

[43]  Mehdi Shahedi Asl,et al.  Sintering behavior of ZrB2–SiC composites doped with Si3N4: A fractographical approach , 2017 .

[44]  Qing Huang,et al.  Densification of high-strength B4C–TiB2 composites fabricated by pulsed electric current sintering of TiC–B mixture , 2017 .

[45]  A. H. Korayem,et al.  Surface modification of polyurethane via creating a biocompatible superhydrophilic nanostructured layer: role of surface chemistry and structure , 2016 .

[46]  H. Katsui,et al.  Spark plasma sintering of TiC–ZrC composites , 2015 .

[47]  R. Razavi,et al.  Synthesis and the Surface Resistivity of Carbon Black Pigment on Black Silicone Thermal Control Coating , 2015 .

[48]  T. Ebadzadeh,et al.  Densification, microstructure and mechanical properties of Mullite–TiC composites prepared by spark plasma sintering , 2015 .

[49]  F. S. Jazi,et al.  Synthesis and Characterization of In Situ Al-Al13Fe4-Al2O3-TiB2 Nanocomposite Powder by Mechanical Alloying and Subsequent Heat Treatment , 2014 .

[50]  M. H. Paydar,et al.  Structural evaluation and mechanical properties of nanostructured Al/B4C composite fabricated by ARB process , 2013 .

[51]  H. Seifert,et al.  Spark plasma sintering of TiC particle-reinforced molybdenum composites , 2012 .

[52]  Shaojian Lin,et al.  Microstructure and abrasive behaviors of TiC-316L composites prepared by warm compaction and microwave sintering , 2012 .

[53]  R. Pailler,et al.  Fabrication and characterization of sintered TiC–SiC composites , 2011 .

[54]  A. Chrysanthou,et al.  TiC-TiB2 composites : A review of phase relationships, processing and properties , 2008 .

[55]  T. Hirai,et al.  Microhardness of non-stoichiometric TiCx, plates prepared by chemical vapour deposition , 1990 .