Effect of detector scatter on the decoding accuracy of a DOI detector module
暂无分享,去创建一个
Monte Carlo simulation was used to study the effect detector scatter has on the decoding accuracy of a depth of interaction (DOI) detector module and on the quantitative imaging characteristics of a DOI detector system, The detector module consisted of a 4/spl times/4 array of detector units. Each unit consisted of a 2/spl times/2 block of 2/spl times/2/spl times/20 mm LSO crystals. The detector units use light sharing and ratio information to estimate DOI. The detector system consisted of 24 detector modules. Positioning methods using different criteria to select the first interaction point in a detector module to improve decoding accuracy were investigated (e.g., maximum energy, second maximum, minimum DOI). Selecting the detector unit corresponding to the minimum DOI provided the best decoding accuracy for photons entering perpendicular to the detector. However, for photons entering at large angles of incidence (e.g., 30 degrees) the maximum energy selection criterion performed the best. The average DOI offset due to scatter within a detector unit was 1.7 mm. Detector scatter did not affect the image resolution of the simulated DOI detector system; however, it did affect quantitative recovery of small regions of interest.
[1] M. S. Kaplan,et al. Preliminary Experience With The Photon History Generator Module Of A Public-domain Simulation System For Emission Tomography , 1993, 1993 IEEE Conference Record Nuclear Science Symposium and Medical Imaging Conference.
[2] T. Lewellen,et al. Design of a depth of interaction (DOI) PET detector module , 1997, 1997 IEEE Nuclear Science Symposium Conference Record.