Improvement of Wettability of Te-Modified Lead-Free Glass Frit and its Effect to Front Side Silver Paste in Crystalline Silicon Solar Cells

[1]  Hui Wang,et al.  A Study of Interfacial Wettability of Glass Spreading on a Silicon Substrate , 2022, Journal of Electronic Materials.

[2]  S. Li,et al.  An analytical investigation on characterizing the properties of glass composition for crystalline silicon solar cells based on the digital microsystem measurement technology , 2022, Solar Energy Materials and Solar Cells.

[3]  Lei Zhao,et al.  Effect of TeO2 on Ag/Si interface contact of crystalline silicon solar cells , 2022, Materials Letters.

[4]  M. Shen,et al.  Improvement of Light Trapping in Bifacial PERC Silicon Solar Cells by Optimizing the Rear Surface Morphology , 2022, ACS Applied Energy Materials.

[5]  C. M. Joseph,et al.  Structural and spectroscopic studies of V2O5 incorporated lithium-bismuth-boro-tellurite glass ceramics , 2022, Materials Today: Proceedings.

[6]  Yuxin Tian,et al.  One-step hydrothermal carbonization of amine modified black liquor and lignin for efficient Cr(VI) adsorption , 2022, Journal of Water Process Engineering.

[7]  M. Schneider-Ramelow,et al.  Low‐Temperature Processible Highly Conducting Pastes for Printed Electronics Applications , 2022, Advanced Engineering Materials.

[8]  Jicheng Zhou,et al.  Effect of TeO2-based lead-free glass on contact formation of front side silver metallization for monocrystalline silicon solar cells , 2022, Solar Energy Materials and Solar Cells.

[9]  Hui Wang,et al.  Investigation of the P-doped lead-free glass frit based on the principle of low-temperature phosphorus diffusion for multicrystalline silicon solar cells , 2021 .

[10]  Y. Lai,et al.  The Relationship between the Structure and Thermal Properties of Bi2O3-ZnO-B2O3 Glass System , 2021, Advances in Condensed Matter Physics.

[11]  G. Upender,et al.  Vibrational, thermal and optical studies of 30TeO2-39.5B2O3-(30-x)ZnO-xLi2O-0.5 V2O5 (0 ≤ x ≤ 30 mol%) glass system , 2021 .

[12]  Chunlan Zhou,et al.  Life cycle assessment on PERC solar modules , 2021, Solar Energy Materials and Solar Cells.

[13]  Wei-guo Guo,et al.  Wetting behavior of SnO-ZnO-P2O5-SiO2 glass on 60 vol.% SiCp/Al composites and characterization of the interfacial phases , 2021 .

[14]  Changyu Shen,et al.  Largely improved thermal conductivity of HDPE composites by building a 3D hybrid fillers network , 2021 .

[15]  Hui Wang,et al.  Enhanced interfacial wettability change materials based on graphene-doped Pb–Te–Si glass frit for wide sintering window of solar cells , 2021, Solar Energy Materials and Solar Cells.

[16]  Weidong Wu,et al.  One-pot preparation of NaBiO3/PNMA composite: Surface properties and photocatalytic performance , 2021 .

[17]  K. Moon,et al.  Rheological properties and screen printability of UV curable conductive ink for flexible and washable E-textiles , 2021 .

[18]  Christopher M. Smyth,et al.  Controlling the Pd Metal Contact Polarity to Trigonal Tellurium by Atomic Hydrogen‐Removal of the Native Tellurium Oxide , 2021, Advanced Materials Interfaces.

[19]  Li‐Kai Lin,et al.  The influence of Bi2O3 glass powder in the silver paste and the impact on silicon solar cell substrates , 2021 .

[20]  Xiaosong Hu,et al.  Rheological behavior and particle alignment of cellulose nanocrystal and its composite hydrogels during 3D printing. , 2021, Carbohydrate polymers.

[21]  Yuchao Zhang,et al.  Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption , 2021, Energy & Environmental Science.

[22]  A. Guerrero,et al.  A rheological approach to 3D printing of plasma protein based doughs , 2021 .

[23]  A. Aberle,et al.  Progress in screen-printed metallization of industrial solar cells with SiOx/poly-Si passivating contacts , 2020 .

[24]  Hui Wang,et al.  Preparation of the lead-free graphene-glass frit composites for crystalline silicon solar cells and investigation of performance , 2020 .

[25]  Hyun-Chul Kim,et al.  Fully solution-processed perovskite solar cells fabricated by lamination process with silver nanoparticle film as top electrode , 2020 .

[26]  Huey-Jiuan Lin,et al.  Investigation of SiO2-B2O3-ZnO-Bi2O3 glass frits on the interface reaction of silver front contacts , 2020 .

[27]  L. Hilliou,et al.  Mixed Carbon Nanomaterial/Epoxy Resin for Electrically Conductive Adhesives , 2020, Journal of Composites Science.

[28]  V. Fthenakis,et al.  Major challenges and opportunities in silicon solar module recycling , 2020, Progress in Photovoltaics: Research and Applications.

[29]  Hyungsun Kim,et al.  Effect of Te-based glass on contact formation and electrical properties in Si solar cells , 2020 .

[30]  K. Wambach,et al.  Research and development priorities for silicon photovoltaic module recycling to support a circular economy , 2020, Nature Energy.

[31]  Hyungsun Kim,et al.  Influence of powder characteristics on shrinkage behavior of 3D-Printed glass structures , 2020 .

[32]  Yongsheng Chen,et al.  Phase Distribution and Carrier Dynamics in Multiple-Ring Aromatic Spacers-Based Two-Dimensional Ruddlesden-Popper Perovskite Solar Cells. , 2020, ACS nano.

[33]  Jin-Young Jung,et al.  All-Room-Temperature Processed 17.25%-Crystalline Silicon Solar Cell , 2020 .

[34]  Fang Lv,et al.  Life-cycle assessment of p-type multi-Si back surface field (BSF) solar module in China of 2019 , 2020, Solar Energy.

[35]  A. Afkhami,et al.  In Situ Growth of Metal-Organic Framework HKUST-1 on Graphene Oxide Nanoribbons with High Electrochemical Sensing Performance in Imatinib Determination. , 2020, ACS applied materials & interfaces.

[36]  A. Mushtaq,et al.  Liquid exfoliation of electronic grade ultrathin tin(II) sulfide (SnS) with intriguing optical response , 2020, npj 2D Materials and Applications.

[37]  Sima Dimitrijev,et al.  Metallization of crystalline silicon solar cells for shingled photovoltaic module application , 2020 .

[38]  Lili Hu,et al.  Experimental study of growth of silver nanoparticles embedded in Bi2O3-SiO2-B2O3 glass , 2019, Journal of Alloys and Compounds.

[39]  Lindsey Karpowich,et al.  Non-volatile free silver paste formulation for front-side metallization of silicon solar cells , 2019, Solar Energy Materials and Solar Cells.

[40]  W. Liao,et al.  Tellurium‐based screen‐printable conductor metallizations for crystalline silicon solar cells , 2019, Progress in Photovoltaics: Research and Applications.

[41]  Jiyong Hu,et al.  A UV Curable Conductive Ink for the Fabrication of Textile-based Conductive Circuits and Wearable UHF RFID Tags. , 2019, ACS applied materials & interfaces.

[42]  Shuxin Bai,et al.  Effect of Pb-Te-Si-O glasses on Ag thick-film contact in crystalline silicon solar cells , 2019, IOP Conference Series: Earth and Environmental Science.

[43]  R. Corkish,et al.  Life cycle assessment on PERC solar modules , 2018, Solar Energy Materials and Solar Cells.

[44]  M. König,et al.  Rheology and Screen-Printing Performance of Model Silver Pastes for Metallization of Si-Solar Cells , 2018, Coatings.

[45]  J. Huh,et al.  Effect of basicity of glass frits on electrical properties of Si solar cells , 2018, Solar Energy Materials and Solar Cells.

[46]  B. Eraiah,et al.  Er3+-ions doped lithium‑bismuth-boro-phosphate glass for 1532 nm emission and efficient red emission up conversion for telecommunication and lasing applications , 2018, Journal of Non-Crystalline Solids.

[47]  Shenglin Jiang,et al.  Sr2+ doping to enhanced energy-storage properties of (Na0.5Bi0.5)0.94Ba0.06TiO3 lead-free ferroelectric ceramics , 2018, Journal of Materials Science: Materials in Electronics.

[48]  R. Choudhary,et al.  Development of lead-free multifunctional materials Bi(Co0.45Ti0.45Fe0.10)O3 , 2018 .

[49]  Yan Qiao,et al.  Investigation of structure, dielectric and energy-storage properties of lead-free niobate glass and glass-ceramics , 2018 .

[50]  Mingyu Li,et al.  Dependence of glass transition on the structure in BiBZn oxide glass , 2018 .

[51]  Zhigang Zang.  Efficiency enhancement of ZnO/Cu2O solar cells with well oriented and micrometer grain sized Cu2O films , 2018 .

[52]  Hui Wang,et al.  Influence of lead-free glass frit in the front contact paste on the conversion efficiency of polycrystalline silicon solar cells , 2017 .

[53]  Michael F Toney,et al.  The formation mechanism for printed silver-contacts for silicon solar cells , 2016, Nature Communications.

[54]  Xinxin Pi,et al.  Improved Ag–Si interface performance for Si solar cells using a novel Te-based glass and recrystallization process of Ag , 2014, Rare Metals.

[55]  Y. Kang,et al.  Characteristics of Bi-based glass frit having similar mean size and morphology to those of silver powders at high firing temperatures , 2010 .

[56]  R. Chtourou,et al.  Study of photoluminescence quenching in Er3+-doped tellurite glasses , 2010 .

[57]  M. Hörteis,et al.  High‐Temperature Contact Formation on n‐Type Silicon: Basic Reactions and Contact Model for Seed‐Layer Contacts , 2010 .

[58]  J. Huh,et al.  Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells , 2009 .

[59]  Makoto Tanaka,et al.  Twenty-two percent efficiency HIT solar cell , 2009 .

[60]  Hyunjin Park,et al.  Role of PbO-based glass frit in Ag thick-film contact formation for crystalline Si solar cells , 2009 .

[61]  H. Sidek,et al.  IR and UV Spectral Studies of Zinc Tellurite Glasses , 2007 .

[62]  B. Karthikeyan,et al.  Structural, optical and glass transition studies on Nd3+-doped lead bismuth borate glasses , 2003 .

[63]  D. Kolb,et al.  Evidence for a change in valence state for tellurium adsorbed on a Pt(111) electrode , 2002 .

[64]  R. Geiss,et al.  Degradation of thin tellurium films , 1983 .