Impact of building forms on thermal performance and thermal comfort conditions in religious buildings in hot climates: a case study in Sharjah city

ABSTRACT The common system used for thermal regulation in mosques of United Arab Emirates (UAE) is the heating, ventilating and air-conditioning (HVAC) system. This system increases demands on energy consumption and increases CO2 emission. A passive design approach is one of the measures to reduce these problems. This study involved an analytical examination of building forms, followed by testing the impact of these forms on its thermal performance and indoor thermal comfort. The tests were conducted using energy simulations software packages. Passive parameters such as shading devices, thermal insulation and natural ventilation were applied in six cases, including the baseline case within each form. The obtained results showed a significant effect of mosque forms as well as passive design techniques on the thermal comfort within the structures. The findings confirmed that the use of passive design alone would not help achieve thermal comfort, but reduce the annual energy consumption by10%. By integrating a hybrid air-conditioning system as another supporting approach, the annual energy consumption could be reduced by 67.5%, which allows for the designing of a much smaller HVAC system.

[1]  Hanan Taleb,et al.  Using passive cooling strategies to improve thermal performance and reduce energy consumption of residential buildings in U.A.E. buildings , 2014 .

[2]  Akeel Noori,et al.  Thermal Comfort Assessment to Building Envelope: A Case Study for New Mosque Design in Baghdad , 2011 .

[3]  Mohammad S. Al-Homoud,et al.  Assessment of monitored energy use and thermal comfort conditions in mosques in hot-humid climates , 2009 .

[4]  Arnaud G. Malan,et al.  HVAC control strategies to enhance comfort and minimise energy usage , 2001 .

[5]  Agis M. Papadopoulos,et al.  Energy study of a medieval tower, restored as a museum , 2003 .

[6]  I. Budaiwi,et al.  Envelope thermal design for energy savings in mosques in hot-humid climate , 2011 .

[7]  Kwok Wai Tham,et al.  Conserving energy without sacrificing thermal comfort , 1993 .

[8]  Emad Mushtaha,et al.  Sustainable Design for the Residences in Gaza City , 2005 .

[9]  Khaled A. Al-Sallal,et al.  Designing a sustainable house in the desert of Abu Dhabi , 2013 .

[10]  Edward Henry Mathews,et al.  Developing cost efficient control strategies to ensure optimal energy use and sufficient indoor comfort , 2000 .

[11]  Radu Zmeureanu,et al.  Thermally acceptable temperature drifts can reduce the energy consumption for cooling in office buildings , 1992 .

[12]  Tianzhen Hong,et al.  Building Performance Simulation , 2014 .

[13]  Khairy Mohammad Abideen.  Aspects of passive cooling and the potential savings in energy, money and atmospheric pollutants emissions in existing air conditioned mosques in Saudi Arabia , 1997 .