Microelectromechanical high-density energy storage/rapid release system

One highly desirable characteristic of electrostatically driven microelectromechanical systems (MEMS) is that they consume very little power. The corresponding drawback is that the force they produce may be inadequate for many applications. It has previously been demonstrated that gear reduction units or microtransmissions can substantially increase the torque generated by microengines. Operating speed, however, is also reduced by the transmission gear ratio. Some applications require both high speed and high force. If this output is only required for a limited period of time, then energy could be stored in a mechanical system and rapidly released upon demand. We have designed, fabricated, and demonstrated a high-density energy storage/rapid release system that accomplishes this task. Built using a 5-level surface micromachining technology, the assembly closely resembles a medieval crossbow. Energy releases on the order of tens of nanojoules have already been demonstrated, and significantly higher energy systems are under development.

[1]  Darle W. Dudley,et al.  Handbook of Practical Gear Design , 1984 .

[2]  Paul J. McWhorter,et al.  Intricate Mechanisms-on-a Chip Enabled by 5-Level Surface Micromachining , 1999 .

[3]  Paul J. McWhorter,et al.  Performance trade-offs for a surface micromachined microengine , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[4]  Ernest J. Garcia,et al.  Microfabricated actuators and their application to optics , 1995, Photonics West.

[5]  Paul J. McWhorter,et al.  Friction in surface-micromachined microengines , 1996, Smart Structures.

[6]  A. Midha,et al.  Parametric Deflection Approximations for End-Loaded, Large-Deflection Beams in Compliant Mechanisms , 1995 .

[7]  J.J. Sniegowski,et al.  Multi-layer enhancement to polysilicon surface-micromachining technology , 1997, International Electron Devices Meeting. IEDM Technical Digest.

[8]  J. J. Sniegowski,et al.  5-level polysilicon surface micromachine technology: Application to complex mechanical systems , 1998 .

[9]  Paul J. McWhorter,et al.  Routes to failure in rotating MEMS devices experiencing sliding friction , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[10]  Larry L. Howell,et al.  Evaluation of equivalent spring stiffness for use in a pseudo-rigid-body model of large-deflection compliant mechanisms , 1996 .

[11]  J. J. Sniegowski,et al.  Performance Tradeoffs for a Surface Micromachined , 1997 .

[12]  J. J. Sniegowski,et al.  Surface Micromachined Microengane As The Driver For Micromechanical Gears , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[13]  Y. Gianchandani,et al.  Bent-beam electro-thermal actuators for high force applications , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).