Adaptive Surface Microprofiling for Microfluidic Energy Conversion

Adaptive microprofiling is a newly proposed technique of embedding open microchannels within a surface to take advantage of resulting slip-flow behavior and drag reduction. The objective of this paper is to predict the optimal geometrical profiles of such microchannels, particularly for minimizing entropy production in convective heat-transfer problems. A theoretical slip-flow formulation (within microchannels) is developed for Knudsen numbers between about 0.02 and 0.07. These values fall within the range governed by the Navier-Stokes equations with slip-flow boundary conditions. Numerical results show that a fourth-order geometrical profile yields lower entropy production than a linearly diverging microchannel. With rapid advances in micromachining technology, it is viewed that adaptive microprofiling can become a useful alternative technique of drag reduction, while increasing heat-transfer effectiveness. These combined objectives can be realized through the newly formulated approach with entropy-based microprofiling, which establishes the optimal microgroove patterns by minimizing entropy production over the surface

[1]  G. F. Naterer,et al.  Entropy and the Second Law Fluid Flow and Heat Transfer Simulation , 2003 .

[2]  Sandra M. Troian,et al.  Patterning liquid flow on the microscopic scale , 1999, Nature.

[3]  Ventsislav Zimparov,et al.  Energy conservation through heat transfer enhancement techniques , 2002 .

[4]  M. Gad-el-Hak.  The Fluid Mechanics of Microdevices—The Freeman Scholar Lecture , 1999 .

[5]  G. Fabbri.  A genetic algorithm for fin profile optimization , 1997 .

[6]  M. Burns,et al.  Thermocapillary Pumping of Discrete Drops in Microfabricated Analysis Devices , 1999 .

[7]  R. Raju,et al.  Modeling Single Component Fluid Transport through Micro Channels and Free Molecule Micro-Resistojet , 2004 .

[8]  I. Boyd,et al.  Blasius boundary layer solution with slip flow conditions , 2002 .

[9]  Greg F. Naterer,et al.  Thermocapillary control of microfluidic transport with a stationary cyclic heat source , 2005 .

[10]  R. Raju,et al.  Hydrodynamic Model for Microscale Flows in a Channel With Two 90 deg Bends , 2004 .

[11]  Optimal Shape Design of a Pressure-Driven Curved Micro Channel , 2004 .

[12]  G. Naterer,et al.  Heat Transfer in Single and Multiphase Systems , 2002 .

[13]  G. Naterer,et al.  Micro-machined Surface Channels Applied to Engine Intake Flow and Heat Transfer , 2003 .

[14]  Daniel A. Tortorelli,et al.  Tangent operators, sensitivity expressions, and optimal design of non‐linear elastica in contact with applications to beams , 1994 .

[15]  G. F. Naterer,et al.  Constructing an Entropy-Stable Upwind Scheme for Compressible Fluid Flow Computations , 1999 .

[16]  Signe Kjelstrup,et al.  Equipartition of forces as a lower bound on the entropy production in heat exchange , 2001 .

[17]  Greg F. Naterer,et al.  Microfluidic exergy loss in a non-polarized thermomagnetic field , 2005 .

[18]  Greg F. Naterer,et al.  Applying heat–entropy analogies with experimental study of interface tracking in phase change heat transfer , 2001 .

[19]  M. Antar.  Steady and transient numerical analysis of the performance of annular fins , 2001 .

[20]  R. Adrian,et al.  Transition from laminar to turbulent flow in liquid filled microtubes , 2004 .

[21]  G. Naterer,et al.  Adaptive Grid Formulation of Thermocapillary Convection in a Microfluidic Two-Phase Flow , 2005 .