Microstructure and mechanical properties of 3D-GH3536/R-GH3128 butt joint welded by fiber laser welding with focus rotation

[1]  Seyed Amin Bagherzadeh,et al.  Investigation of temperature distribution and melt pool microstructure in laser fusion welding of Inconel 625 superalloy , 2021 .

[2]  Yu Long,et al.  Investigation of dissimilar fiber laser welding of low carbon steel and stainless steel by numerical simulation , 2021 .

[3]  Yun-Chen Jiang,et al.  Study on the Microstructure and Fatigue Behavior of a Laser-Welded Ni-Based Alloy Manufactured by Selective Laser Melting Method , 2020, Journal of Materials Engineering and Performance.

[4]  Chunming Wang,et al.  A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: Morphology, microstructure and mechanical properties , 2020 .

[5]  I. Logachev,et al.  Laser welding of Inconel 718 nickel-based alloy layer-by-layer products , 2020 .

[6]  Q. Sun,et al.  Melt flow and microstructural characteristics in beam oscillation superimposed laser welding of 304 stainless steel , 2020 .

[7]  Shibo Wu,et al.  Grain refinement and laser energy distribution during laser oscillating welding of Invar alloy , 2020 .

[8]  R. Xiao,et al.  Weld formation mechanism during fiber laser welding of aluminum alloys with focus rotation and vertical oscillation , 2018, Journal of Manufacturing Processes.

[9]  Florian Fetzer,et al.  Reduction of pores by means of laser beam oscillation during remote welding of AlMgSi , 2018, Optics and Lasers in Engineering.

[10]  Fei Yan,et al.  A study of microstructures and mechanical properties of laser welded joint in GH3030 alloy , 2018, Journal of Mechanical Science and Technology.

[11]  Michael Schmidt,et al.  Influence of oscillation frequency and focal diameter on weld pool geometry and temperature field in laser beam welding of high strength steels , 2018 .

[12]  L. Svensson,et al.  Influence of laser exposure time and point distance on 75-μm-thick layer of selective laser melted Alloy 718 , 2017, The International Journal of Advanced Manufacturing Technology.

[13]  Moataz M. Attallah,et al.  Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy , 2017 .

[14]  Yan-bin Chen,et al.  Comparative study on fiber laser welding of GH3535 superalloy in continuous and pulsed waves , 2016 .

[15]  R. Xiao,et al.  Effect of plume on weld penetration during high-power fiber laser welding , 2016 .

[16]  Ming Gao,et al.  Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel , 2015 .

[17]  I. Todd,et al.  Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach , 2015 .

[18]  Damian Janicki,et al.  Fiber laser welding of nickel based superalloy Rene 77 , 2013, Other Conferences.

[19]  吴世凯 Wu Shikai,et al.  Experimental Investigation on Fiber Laser Welding Stainless Steel 304 to Super Alloy GH3128 , 2012 .

[20]  J. Berretta,et al.  Microstructure development in Nd:YAG laser welding of AISI 304 and Inconel 600 , 2010 .

[21]  Gang-jin Yu,et al.  Dissimilar autogenous full penetration welding of superalloy K418 and 42CrMo steel by a high power CW Nd:YAG laser , 2007 .

[22]  G. Bao,et al.  Suppression of porosity in beam weaving laser welding , 2004 .