Real-time optimal reactive power control for distribution networks

Abstract A computer algorithm for optimal reactive power and voltage control, suitable f OR large distribution networks, is presented in this paper. The proposed algorithm starts with implementing a partitioning and Kron's reduction technique in order to reduce the size of the problem. The algorithm decouples the capacitor problems from the regulator problems and it uses a dynamic programming technique to maximize the reduction in line losses in a real-time environment. The net outcomes of the algorithm are the capacitor bank locations, rating and switching scheme and location of voltage regulators, and tap settings that maximizes the loss reduction. The algorithm ensures that the voltage levels for all buses in the system are within permissible limits at all times. The algorithm is efficient, fast and reliable and can be easily implemented by any utility to optimize line loss reduction on distribution feeders.

[1]  J. Grainger,et al.  Optimum Size and Location of Shunt Capacitors for Reduction of Losses on Distribution Feeders , 1981, IEEE Transactions on Power Apparatus and Systems.

[2]  A. Y. Chikhani,et al.  A Computer Controlled VAR Compensator for Distribution Feeders , 1986, IEEE Power Engineering Review.

[3]  S. Civanlar,et al.  Volt/Var Control on Distribution Systems with Lateral Branches Using Shunt Capacitors and Voltage Regulators Part III: The Numerical Results , 1985, IEEE Transactions on Power Apparatus and Systems.

[4]  J. J. Grainger,et al.  Optimal Voltage Dependent Continuous-Time Control of Reactive Power on Primary Feeders , 1984, IEEE Power Engineering Review.

[5]  W. H. Kersting.  Radial distribution test feeders , 1991 .

[6]  Chin E. Lin,et al.  Real-time optimal reactive power control of static VAR compensators , 1991 .

[7]  A. Y. Chikhani,et al.  Control of Reactive Power in Distribution Systems with an End-Load and Varying Load Condition , 1985, IEEE Power Engineering Review.

[8]  J. Grainger,et al.  Optimal Capacitor Placement on Three-Phase Primary Feeders: Load and Feeder Unbalance Effects , 1983, IEEE Transactions on Power Apparatus and Systems.

[9]  J. J. Grainger,et al.  Design of a Real-Time Switching Control Scheme for Capacitive Compensation of Distribution Feeders , 1982, IEEE Power Engineering Review.

[10]  J. J. Grainger,et al.  Capacity Release by Shunt Capacitor Placement on Distribution Feeders: A New Voltage-Dependent Model , 1982, IEEE Power Engineering Review.

[11]  S. Civanlar,et al.  Optimal Design and Control Scheme for Continuous Capacitive Compensation of Distribution Feeders , 1983, IEEE Transactions on Power Apparatus and Systems.

[12]  Paul Dimo,et al.  Nodal analysis of power systems , 1975 .

[13]  M. E. Baran,et al.  Optimal capacitor placement on radial distribution systems , 1989 .

[14]  A. Y. Chikhani,et al.  A simplified network approach to the VAr control problem for radial distribution systems , 1993 .

[15]  S. Civanlar,et al.  Volt/Var Control on Distribution Systems with Lateral Branches Using Shunt Capacitors and Voltage Regulators Part I: The Overall Problem , 1985, IEEE Transactions on Power Apparatus and Systems.

[16]  S. Civanlar,et al.  Discrete-Tap Control Scheme for Capacitive Compensation of Distribution Feeders , 1984, IEEE Transactions on Power Apparatus and Systems.

[17]  J. J. Grainger,et al.  Placement of Fixed and/or Nonsimultaneously Switched Capacitors on Unbalanced Three-Phase Feeders Involving Laterals , 1985, IEEE Power Engineering Review.

[18]  S. Civanlar,et al.  Volt/Var Control on Distribution Systems with Lateral Branches Using Shunt Capacitors and Voltage Regulators Part II: The Solution Method , 1985, IEEE Transactions on Power Apparatus and Systems.

[19]  A. Y. Chikhani,et al.  Microprocessor controlled reactive power compensator for loss reduction in radial distribution feeders , 1991 .

[20]  Hernando Dura,et al.  Optimum Number, Location, and Size of Shunt Capacitors in Radial Distribution Feeders A Dynamic Programming Approach , 1968 .