Three-dimensional texture analysis of cancellous bone cores evaluated at clinical CT resolutions

The objective of this study was to determine if three-dimensional (3D) Haralick co-occurrence texture measures calculated from low-resolution CT images of trabecular bone correlate with 3D structural indices measured from high-resolution CT images. Thirty-three cubical regions of trabecular bone from human calcanei were analyzed using images obtained from a micro-computed tomography (micro-CT) scanner. 3D measures of bone architecture were calculated. The original images were then subsampled by factors of 5, 10, 15, and 20, and 3D texture features were calculated for each set of subsampled images. Linear regression models showed that co-occurrence texture features were significantly correlated with structural indices. Over 90% of the variation in three different structural indices was explained in two-variable regression models using texture features as predictors when the voxel side length was reduced by a factor of 10. Texture features calculated from clinical images may increase our ability to obtain trabecular bone architectural information when high-resolution images are unobtainable.

[1]  P. Rüegsegger,et al.  A microtomographic system for the nondestructive evaluation of bone architecture , 2006, Calcified Tissue International.

[2]  J. Bauer,et al.  Imaging of Trabecular Bone Structure , 2002, Seminars in musculoskeletal radiology.

[3]  M. Grass,et al.  3D cone-beam CT reconstruction for circular trajectories. , 2000, Physics in medicine and biology.

[4]  E. Gelsema,et al.  Unraveling the Role of Structure and Density in Determining Vertebral Bone Strength , 1997, Calcified Tissue International.

[5]  P. Rüegsegger,et al.  Calibration of trabecular bone structure measurements of in vivo three-dimensional peripheral quantitative computed tomography with 28-microm-resolution microcomputed tomography. , 1999, Bone.

[6]  S. Majumdar,et al.  Assessment of trabecular structure using high resolution CT images and texture analysis. , 1998, Journal of computer assisted tomography.

[7]  A. Cotten,et al.  Image Analysis of the Distal Radius Trabecular Network Using Computed Tomography , 1999, Osteoporosis International.

[8]  P. Rüegsegger,et al.  Direct Three‐Dimensional Morphometric Analysis of Human Cancellous Bone: Microstructural Data from Spine, Femur, Iliac Crest, and Calcaneus , 1999, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[9]  R. Mann,et al.  Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor , 1984 .

[10]  X Ouyang,et al.  Fractal analysis of radiographs: assessment of trabecular bone structure and prediction of elastic modulus and strength. , 1999, Medical physics.

[11]  K Andersen,et al.  Three-dimensional reconstruction of entire vertebral bodies. , 1994, Bone.

[12]  Robert M. Haralick,et al.  Textural Features for Image Classification , 1973, IEEE Trans. Syst. Man Cybern..

[13]  Punam K. Saha,et al.  Measurement of trabecular bone thickness in the limited resolution regime of in vivo MRI by fuzzy distance transform , 2004, IEEE Transactions on Medical Imaging.

[14]  Rafael C. González,et al.  Local Determination of a Moving Contrast Edge , 1985, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[15]  G. Henebry,et al.  Lacunarity analysis of spatial pattern in CT images of vertebral trabecular bone for assessing osteoporosis. , 2002, Medical engineering & physics.

[16]  A Odgaard,et al.  Three-dimensional methods for quantification of cancellous bone architecture. , 1997, Bone.

[17]  Don Stredney,et al.  X-ray micro-computed tomography system: novel applications in bone imaging , 2003, Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE Cat. No.03CH37439).

[18]  H. Imhof,et al.  Imaging of trabecular bone structure in osteoporosis , 1999, European Radiology.

[19]  P. Rüegsegger,et al.  Morphometric analysis of human bone biopsies: a quantitative structural comparison of histological sections and micro-computed tomography. , 1998, Bone.

[20]  Jun-ichiro Toriwaki,et al.  New algorithms for euclidean distance transformation of an n-dimensional digitized picture with applications , 1994, Pattern Recognit..

[21]  H. Genant,et al.  Image-Based Assessment of Spinal Trabecular Bone Structure from High-Resolution CT Images , 1998, Osteoporosis International.

[22]  S A Goldstein,et al.  The relationship between the structural and orthogonal compressive properties of trabecular bone. , 1994, Journal of biomechanics.

[23]  G. Dougherty.  A comparison of the texture of computed tomography and projection radiography images of vertebral trabecular bone using fractal signature and lacunarity. , 2001, Medical engineering & physics.

[24]  P. Rüegsegger,et al.  A new method for the model‐independent assessment of thickness in three‐dimensional images , 1997 .

[25]  S. Goldstein,et al.  The direct examination of three‐dimensional bone architecture in vitro by computed tomography , 1989, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[26]  P Rüegsegger,et al.  Comparison of structure extraction methods for in vivo trabecular bone measurements. , 1999, Computerized medical imaging and graphics : the official journal of the Computerized Medical Imaging Society.

[27]  H. Gundersen,et al.  Quantification of connectivity in cancellous bone, with special emphasis on 3-D reconstructions. , 1993, Bone.

[28]  Steven A. Goldstein,et al.  Measurement and significance of three-dimensional architecture to the mechanical integrity of trabecular bone , 2005, Calcified Tissue International.

[29]  P. Rüegsegger,et al.  Morphometric analysis of noninvasively assessed bone biopsies: comparison of high-resolution computed tomography and histologic sections. , 1996, Bone.

[30]  W. C. Hayes,et al.  Ultrasound and densitometry of the calcaneus correlate with the failure loads of cadaveric femurs , 1995, Calcified Tissue International.

[31]  J. Kinney,et al.  The Relationship Between Three‐Dimensional Connectivity and the Elastic Properties of Trabecular Bone , 1998, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[32]  K. Singer,et al.  Prediction of thoracic and lumbar vertebral body compressive strength: correlations with bone mineral density and vertebral region. , 1995, Bone.

[33]  P. Rüegsegger,et al.  The ability of three-dimensional structural indices to reflect mechanical aspects of trabecular bone. , 1999, Bone.