Analysis of Coatings based on Carbon-based Nanomaterials for Paint Industries-A Review

The spray painting is widely used in automobile industries, marines and navy, etc. Extensive development of research is going in Robotics for painting application. In which it gives the best qualit...

[1]  R. Petrova,et al.  Effect of carbon nanotube (CNT) functionalization in epoxy-CNT composites , 2018, Nanotechnology reviews.

[2]  S. Laurenzi,et al.  Spray coating process of MWCNT/epoxy nanocomposite films for aerospace applications: Effects of process parameters on surface electrical properties , 2019, Acta Astronautica.

[3]  Ning Xi,et al.  Automated Robot Tool Trajectory Connection for Spray Forming Process , 2012 .

[4]  V. Truong,et al.  Corrosion protection of magnesium by electroactive polypyrrole/paint coatings , 2000 .

[5]  Qiang Zhao,et al.  A novel trajectory planning scheme for spray painting robot with Bézier curves , 2016, 2016 Chinese Control and Decision Conference (CCDC).

[6]  Nelson K. Akafuah,et al.  Automotive Paint Spray Characterization and Visualization , 2013 .

[7]  Zhenhua Cai,et al.  Application of robot offline programming in thermal spraying , 2012 .

[8]  Yang Tang,et al.  Surface Modeling of Workpiece and Tool Trajectory Planning for Spray Painting Robot , 2015, PloS one.

[9]  Yujie Feng,et al.  Enhanced performance of microbial fuel cell with a bacteria/multi-walled carbon nanotube hybrid biofilm , 2017 .

[10]  Lu Chen,et al.  Trajectory planning method based on transitional segment optimization of spray painting robot on complex-free surface , 2019, Ind. Robot.

[11]  M. Schubauer-Berigan,et al.  Characterization and workplace exposure assessment of nanomaterial released from a carbon nanotube-enabled anti-corrosive coating , 2018, NanoImpact.

[12]  Vikram Kapila,et al.  An Augmented Reality Framework for Robotic Tool-path Teaching , 2020 .

[13]  W. Krenkel,et al.  Infrared reflective wall paint in buildings: Energy saving potentials and thermal comfort , 2020 .

[14]  Ender Hazir,et al.  Effect of CNC application parameters on wooden surface quality , 2017 .

[15]  Johan S. Carlson,et al.  Process Simulation and Automatic Path Planning of Adhesive Joining , 2016 .

[16]  M. Rahimnejad,et al.  Fabrication of anode electrode by a novel acrylic based graphite paint on stainless steel mesh and investigating biofilm effect on electrochemical behavior of anode in a single chamber microbial fuel cell , 2020 .

[17]  Z. Pászti,et al.  Corrosion protection of cold-rolled steel with alkyd paint coatings composited with submicron-structure types polypyrrole-modified nano-size alumina and carbon nanotubes , 2012 .

[18]  Jolanta Krystek,et al.  Automotive Paint Shop 4.0 , 2020, Comput. Ind. Eng..

[19]  J. Stejskal,et al.  Conducting polyaniline/multi-wall carbon nanotubes composite paints on low carbon steel for corrosion protection: electrochemical investigations , 2013, Chemical Papers.

[20]  K. Logesh,et al.  Multi-walled carbon nanotube mixed with isopropyl alcohol Nano fluid for heat transfer applications , 2019, Materials Today: Proceedings.

[22]  C. Tropea,et al.  Analysis of pneumatic atomizer spray profiles , 2016 .

[23]  Sergei Sazhin,et al.  Droplets and Sprays , 2014 .

[24]  A. Yarin,et al.  Self-healing corrosion protection film for marine environment , 2020 .

[25]  D. Zahn,et al.  Properties of thin layers of electrically conductive polymer/MWCNT composites prepared by spray coating , 2017 .

[26]  Peter Kleinebudde,et al.  Coating Uniformity: Influence of Atomizing Air Pressure , 2003, Pharmaceutical development and technology.

[27]  B. Wei,et al.  Hybrids of CNTs and acrylic emulsion for the consolidation of wall paintings , 2018, Progress in Organic Coatings.

[28]  Shital S. Chiddarwar,et al.  Novel integrated offline trajectory generation approach for robot assisted spray painting operation , 2015 .

[29]  M. Masud,et al.  Design and experimental investigation of an internal mixing twin-fluid atomiser for the generation of test aerosol particles , 2020, Australian Journal of Mechanical Engineering.

[30]  Weiming Zhang,et al.  Paint thickness simulation for painting robot trajectory planning: a review , 2017, Ind. Robot.

[31]  Mona G. Ibrahim,et al.  CNTs/MOF-808 painted plates for extended treatment of pharmaceutical and agrochemical wastewaters in a novel photocatalytic reactor , 2021 .

[32]  C. A. Hille,et al.  Effects of UV degradation on surface hydrophobicity, crack, and thickness of MWCNT-based nanocomposite coatings , 2011 .

[33]  Tun-Ping Teng,et al.  Enhance heat dissipation for projection lamps by MWCNTs nano-coating , 2013 .

[34]  Shital S. Chiddarwar,et al.  Incremental approach for trajectory generation of spray painting robot , 2015, Ind. Robot.

[35]  A. Ahmad,et al.  Coating paint for dyes removal: Performance and characteristic , 2017 .

[36]  Suksan Prombanpong,et al.  ScienceDirect Variety Management in Manufacturing . Proceeding s of the 47 th CIRP Conference on Manufacturing Systems Material consumption and dry film thickness in spray coating process , 2022 .

[37]  O. K. Abubakre,et al.  Effect of coating mild steel with CNTs on its mechanical properties and corrosion behaviour in acidic medium , 2017 .

[38]  I-Ming Chen,et al.  Flexible telemanipulation based handy robot teaching on tape masking with complex geometry , 2020 .

[39]  J. Froines,et al.  Size distribution of chromate paint aerosol generated in a bench-scale spray booth. , 2005, The Annals of occupational hygiene.

[40]  Thomas A. Fuhlbrigge,et al.  Paint deposition simulation for robotics automotive painting line , 2014, The 4th Annual IEEE International Conference on Cyber Technology in Automation, Control and Intelligent.

[41]  P. Apte,et al.  Evaluation of Mechanical Properties of Epoxy/Nanoclay/Multi-Walled Carbon Nanotube Nanocomposites using Taguchi Method , 2012 .

[42]  Q Zhang,et al.  Neural network-based compensation control for trajectory tracking of industrial robots , 2015 .

[43]  P. Sethuramalingam,et al.  A comparative analysis of surface roughness in robot spray painting using nano paint by Taguchi – fuzzy logic-neural network methods , 2020, Australian Journal of Mechanical Engineering.

[44]  Václav Kaczmarczyk,et al.  Methods to Decrease Power Consumption in Industrial Robotics , 2018 .

[45]  B. Venkateshwarlu,et al.  A Brief Review on Cold Spray Coating Process , 2020 .

[46]  S. Comber,et al.  Metal contamination of sediment by paint peeling from abandoned boats, with particular reference to lead. , 2014, The Science of the total environment.

[47]  Toly Chen,et al.  Fuzzy neural network approach to optimizing process performance by using multiple responses , 2016, J. Ambient Intell. Humaniz. Comput..

[48]  Xiao-bo Zhu,et al.  Multi-walled carbon nanotubes enhanced superhydrophobic MWCNTs-Co/a-C:H carbon-based film for excellent self-cleaning and corrosion resistance , 2018, Diamond and Related Materials.

[49]  Ashutosh Kumar Singh,et al.  Simultaneous optimisation of quality and productivity characteristics during machining of multiwall carbon nanotube/epoxy nanocomposites , 2020, Australian Journal of Mechanical Engineering.

[50]  V. Loganina.  Statistical quality assurance of the appearance of paint coatings , 2020 .

[51]  R. Senthilkumar,et al.  Analysis of natural convective heat transfer of nano coated aluminium fins using Taguchi method , 2013 .

[52]  Jun Wu,et al.  Accurate dynamic modeling and control parameters design of an industrial hybrid spray-painting robot , 2020, Robotics Comput. Integr. Manuf..

[53]  B. Iversen,et al.  Waterborne acrylic paint system based on nanoceria for corrosion protection of steel , 2016 .

[54]  Fang-Chyou Chiu,et al.  Evident improvements in the rigidity, toughness, and electrical conductivity of PVDF/HDPE blend with selectively localized carbon nanotube , 2020 .

[55]  William A. Heitbrink,et al.  A Comparison of Conventional and High Volume-Low Pressure Spray-Painting Guns , 1996 .

[56]  Hamed Fazlollahtabar,et al.  Fuzzy possibility regression integrated with fuzzy adaptive neural network for predicting and optimizing electrical discharge machining parameters , 2020, Comput. Ind. Eng..

[57]  Junze Jiang,et al.  Paint thickness simulation for robotic painting of curved surfaces based on Euler–Euler approach , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[58]  B. Lippy,et al.  Exposure to airborne nano-titanium dioxide during airless spray painting and sanding , 2019, Journal of occupational and environmental hygiene.

[59]  B. Venkateshwarlu,et al.  Effect of reinforcement of carbon nanotubes on air plasma sprayed conventional Al2O3-3%TiO2 ceramic coatings , 2020 .

[60]  Clarence W. de Silva,et al.  Applications of fuzzy logic in the control of robotic manipulators , 1995 .

[61]  Ning Xu,et al.  Tool Trajectory Optimization of Spray Painting Robot for Many- Times Spray Painting , 2014 .

[62]  V. Bolleddu,et al.  Characteristics of Thermally Sprayed Alumina-Titania Ceramic Coatings obtained from Conventional and Nanostructured Powders - A Review , 2021, Australian Journal of Mechanical Engineering.

[63]  Michael Stintz,et al.  Granulometric characterization of airborne particulate release during spray application of nanoparticle-doped coatings , 2014, Journal of Nanoparticle Research.

[64]  Y. Show,et al.  Anticorrosion coating of carbon nanotube/polytetrafluoroethylene composite film on the stainless steel bipolar plate for proton exchange membrane fuel cells , 2013 .

[65]  R. Bhalamurugan,et al.  Performance Characteristic Analysis of Automated Robot Spray Painting Using Taguchi Method and Gray Relational Analysis , 2015 .

[66]  M. Wei,et al.  Fabrication of graphene oxide/multi-walled carbon nanotube/urushiol formaldehyde polymer composite coatings and evaluation of their physico-mechanical properties and corrosion resistance , 2019, Progress in Organic Coatings.

[67]  T. Teng,et al.  Heat dissipation performance of MWCNTs nano-coolant for vehicle , 2013 .

[68]  B. K. Rout,et al.  Simulation and implementation of calligraphic writing using ABB 1410 industrial manipulator , 2018, 2018 2nd International Conference on Inventive Systems and Control (ICISC).

[69]  Kozo Saito,et al.  Effects of automotive paint spray technology on the paint transfer efficiency – a review , 2018 .

[70]  Mihai Crenganis,et al.  Dynamic Analysis of a 7 DOF Robot Using Fuzzy Logic for Inverse Kinematics Problem , 2019, ITQM.

[71]  W. Zhou,et al.  A cross-linked coating decorated mesh prepared by brush-painting method for oil-in-water emulsions separation , 2020 .

[72]  B. Latha Shankar,et al.  Optimization of Robotic Spray Painting process Parameters using Taguchi Method , 2018 .

[73]  Cristina Prieto,et al.  Improving durability of silicone-based paint coatings used in solar power plants by controlling consolidation procedures , 2020 .

[74]  Jean-François Chatelain,et al.  Comparison of surface roughness quality obtained by high speed CNC trimming and high speed robotic trimming for CFRP laminate , 2016 .

[75]  R. Kumar,et al.  Performance enhancement analysis of triangular solar air heater coated with nanomaterial embedded in black paint , 2020 .

[76]  R. Joseph,et al.  Nanotechnology-A New Prospective in Organic Coating - Review , 2011 .

[77]  N. Arora,et al.  An investigation on the development and wear performance of chromium-MWCNTs transformed HVOF sprayed nano-WC-CoCr coatings , 2020 .

[78]  Ilker S. Bayer,et al.  Durable and flexible graphene composites based on artists’ paint for conductive paper applications , 2015 .

[79]  Faraz Junejo,et al.  Computer Aided Design of a Low-Cost Painting Robot , 2017 .

[80]  Thomas Bauernhansl,et al.  Numerical and experimental study of spray coating using air-assisted high pressure atomizers , 2015 .

[81]  Ole Madsen,et al.  Skill-based instruction of collaborative robots in industrial settings , 2018, Robotics and Computer-Integrated Manufacturing.

[82]  B. Venkateshwarlu,et al.  A Critical Review on Nano structured Coatings for Alumina-Titania (Al2O3-TiO2) Deposited by Air Plasma Spraying Process (APS) , 2020 .

[83]  Pallav Gupta,et al.  Analysis of D-gun sprayed coating on medium carbon steel , 2020 .

[84]  Yanping Du,et al.  Advanced thermal management of a solar cell by a nano-coated heat pipe plate: A thermal assessment , 2017 .

[85]  J. Lehman,et al.  Carbon Nanotube-Based Black Coatings , 2017, 1709.07951.

[86]  Dawei Zhang,et al.  Superhydrophobic carbon nanotubes/epoxy nanocomposite coating by facile one-step spraying , 2018 .

[87]  Tsung-Han Shen,et al.  Effects of multiwall carbon nanotube addition on the corrosion resistance and underwater acoustic absorption properties of polyurethane coatings , 2018, Progress in Organic Coatings.