A criterion for the assessment of the reliability of ASHRAE conduction transfer function coefficients

This paper presents a new mathematical approach, which, when applied to conduction transfer functions (CTFs) of a multi-layered wall, is able to predict the reliability of building simulations. This new procedure can be used to identify the best set of CTF coefficients, which are a critical point at the core of the ASHRAE calculation methodology founded on the transfer function method. To evaluate the performance of different CTF coefficient sets, the authors performed a large number of thermal simulations on the multi-layered walls included in the ASHRAE Handbook, volume fundamentals, and on other walls typical of Mediterranean building heritage. Those data were employed to test an algorithm able to assess the reliability of the simulations. The numerical results show that it is possible to select the optimal number of coefficients on the basis of the size of the poles of a CTF. The proposed criterion, which employs a pole threshold value, is highly accurate, fast and easy to integrate in the most diffuse building simulation tools.

[1]  Nathan Mendes,et al.  Analysis of numerical methods and simulation time step effects on the prediction of building thermal performance , 2004 .

[2]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[3]  Morris Grenfell Davies,et al.  On the basis of the environmental temperature procedure , 1978 .

[4]  E. I. Jury,et al.  Theory and application of the z-transform method , 1965 .

[5]  Jeffrey D. Spitler,et al.  Applicability of calculation methods for conduction transfer function of building constructions , 2009 .

[6]  Valerio Lo Brano,et al.  Single thermal zone balance solved by Transfer Function Method , 2005 .

[7]  Elizabeth Kossecka,et al.  Multi-dimensional heat transfer through complex building envelope assemblies in hourly energy simulation programs , 2002 .

[8]  Aldo Orioli,et al.  On the reliability of ASHRAE conduction transfer function coefficients of walls , 2000 .

[9]  Douglas C. Hittle,et al.  An improved root-finding procedure for use in calculating transient heat flow through multilayered slabs , 1983 .

[10]  C. O. Pedersen,et al.  Calculating building heating loads using the frequency response of multi-layered slabs. [BLAST code, NBSLD code] , 1981 .

[11]  Shengwei Wang,et al.  An improvement to frequency-domain regression method for calculating conduction transfer functions of building walls , 2008 .

[12]  Shengwei Wang,et al.  Transient heat flow calculation for multilayer constructions using a frequency-domain regression method , 2003 .

[13]  Laura Giarre,et al.  Thermal dynamic models using z-transform coefficients: an algorithm to improve the reliability of simulations , 2003 .

[14]  D. G. Stephenson,et al.  Cooling load calculations by thermal response factor method , 1967 .

[15]  Valerio Lo Brano,et al.  Is the transfer function method reliable in a European building context? A theoretical analysis and a case study in the south of Italy , 2005 .

[16]  Jeffrey D. Spitler,et al.  Development of periodic response factors for use with the radiant time series method , 1999 .

[17]  Fariborz Haghighat,et al.  A procedure for calculating thermal response factors of multi-layer walls—State space method , 1991 .