Fracture network created by 3‐D printer and its validation using CT images

Understanding flow mechanisms in fractured media is essential for geoscientific research and geological development industries. This study used 3-D printed fracture networks in order to control the properties of fracture distributions inside the sample. The accuracy and appropriateness of creating samples by the 3-D printer was investigated by using a X-ray CT scanner. The CT scan images suggest that the 3-D printer is able to reproduce complex three-dimensional spatial distributions of fracture networks. Use of hexane after printing was found to be an effective way to remove wax for the posttreatment. Local permeability was obtained by the cubic law and used to calculate the global mean. The experimental value of the permeability was between the arithmetic and geometric means of the numerical results, which is consistent with conventional studies. This methodology based on 3-D printed fracture networks can help validate existing flow modeling and numerical methods.

[1]  Christopher H. Scholz,et al.  Relation between vein length and aperture , 1995 .

[2]  J. E. Warren,et al.  The Behavior of Naturally Fractured Reservoirs , 1963 .

[3]  Jon E. Olson,et al.  Sublinear scaling of fracture aperture versus length: An exception or the rule? , 2003 .

[4]  Olivier Bour,et al.  Connectivity of random fault networks following a power law fault length distribution , 1997 .

[5]  P. Renard,et al.  Calculating equivalent permeability: a review , 1997 .

[6]  Donald M. Reeves,et al.  Statistical tests of scaling relationships for geologic structures , 2013 .

[7]  K Olasek,et al.  Application of 3D printing technology in aerodynamic study , 2014 .

[8]  Yujing Jiang,et al.  Review: Mathematical expressions for estimating equivalent permeability of rock fracture networks , 2016, Hydrogeology Journal.

[9]  Chin-Fu Tsang,et al.  Tracer transport in a stochastic continuum model of fractured media , 1996 .

[10]  H. S. Price,et al.  Flow in Heterogeneous Porous Media , 1961 .

[11]  Olivier Bour,et al.  Clustering and size distributions of fault patterns: Theory and measurements , 1999 .

[12]  G. Marsily,et al.  Modeling fracture flow with a stochastic discrete fracture network: calibration and validation: 1. The flow model , 1990 .

[13]  Olivier Bour,et al.  A likely universal model of fracture scaling and its consequence for crustal hydromechanics , 2010 .

[14]  N. P. Christensen,et al.  Variations in fracture system geometry and their implications for fluid flow in fractures hydrocarbon reservoirs , 1999, Petroleum Geoscience.

[15]  Robert W. Zimmerman,et al.  Estimating the Hydraulic Conductivity of Two-Dimensional Fracture Networks Using Network Geometric Properties , 2010, Transport in Porous Media.

[16]  P. Carman.  Fluid flow through granular beds , 1997 .

[17]  H. Zheng,et al.  Modeling rock specimens through 3D printing: Tentative experiments and prospects , 2016 .

[18]  Olivier Bour,et al.  A statistical scaling model for fracture network geometry, with validation on a multiscale mapping of a joint network (Hornelen Basin, Norway) , 2002 .

[19]  C. Harding,et al.  3D printing sandstone porosity models , 2015 .

[20]  Jens Ledet Jensen,et al.  Use of the geometric average for effective permeability estimation , 1991 .

[21]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[22]  S. P. Neuman,et al.  Stochastic continuum representation of fractured rock permeability as an alternative to the REV and fracture network concepts , 1988 .

[23]  J. S. Y. Wang,et al.  Validity of cubic law for fluid flow in a deformable rock fracture. Technical information report No. 23 , 1979 .

[24]  Tayfun Babadagli,et al.  Effective fracture network permeability of geothermal reservoirs , 2011 .

[25]  T. Vanorio,et al.  Effects of changes in rock microstructures on permeability: 3‐D printing investigation , 2016 .

[26]  Larry W. Lake,et al.  Patterns of Permeability in Eolian Deposits: Page Sandstone (Jurassic), Northeastern Arizona , 1988 .

[27]  P. Witherspoon,et al.  Porous media equivalents for networks of discontinuous fractures , 1982 .

[28]  Yang Ju,et al.  Visualization of the complex structure and stress field inside rock by means of 3D printing technology , 2014 .

[29]  Yonggang Duan,et al.  A fractal analysis of permeability for fractured rocks , 2015 .

[30]  T. N. Narasimhan,et al.  A PRACTICAL METHOD FOR MODELING FLUID AND HEAT FLOW IN FRACTURED POROUS MEDIA , 1985 .

[31]  Yujing Jiang,et al.  A fractal model for characterizing fluid flow in fractured rock masses based on randomly distributed rock fracture networks , 2015 .