Electromagnetic forming—A review

[1]  H. A. Lorentz.  Versuch einer Theorie der electrischen und optischen Erscheinungen in bewegten Körpern , 2013 .

[2]  G. Daehn,et al.  Electromagnetic impulse calibration of high strength sheet metal structures , 2011 .

[3]  Glenn S. Daehn,et al.  Application of high velocity impact welding at varied different length scales , 2011 .

[4]  Glenn S. Daehn,et al.  Production of low-volume aviation components using disposable electromagnetic actuators , 2011 .

[5]  A. E. Tekkaya,et al.  Thermo-mechanical processing of aluminum profiles by integrated electromagnetic compression subsequent to hot extrusion , 2011 .

[6]  Iñaki Pérez,et al.  Analysis and comparative study of factors affecting quality in the hemming of 6016T4AA performed by means of electromagnetic forming and process characterization , 2011 .

[7]  A. Erman Tekkaya,et al.  Simulation of tube wrinkling in electromagnetic compression , 2010, Prod. Eng..

[8]  Electromagnetic impact welding of copper-to-copper sheets , 2010 .

[9]  Oren Sadot,et al.  Wave formation mechanism in magnetic pulse welding , 2010 .

[10]  Sachin D. Kore,et al.  Numerical modeling of electromagnetic welding , 2010 .

[11]  Glenn S. Daehn,et al.  Commercialization of Fuel Cell Bipolar Plate Manufacturing by Electromagnetic Forming , 2010 .

[12]  Glenn S. Daehn,et al.  Impact Welding in a Variety of Geometric Configurations , 2010 .

[13]  C. Beerwald,et al.  Impulse Hydroforming Method for Very Thin Sheets from Metallic or Hybrid Materials , 2010 .

[14]  M. Worswick,et al.  Effects of Force Distribution and Rebound on Electromagnetically Formed Sheet Metal , 2010 .

[15]  I. Eguia,et al.  Electromagnetic Forming of Longitudinal Strengthening Ribs in Roll Formed Automotive Profiles , 2010 .

[16]  G. Zittel.  A Historical Review of High Speed Metal Forming , 2010 .

[17]  Berndt Brenner,et al.  Insights into intermetallic phases on pulse welded dissimilar metal joints , 2010 .

[18]  Peter Groche,et al.  Fundamentals of EMPT-Welding , 2010 .

[19]  Koen Faes,et al.  Joining of Copper to Brass Using Magnetic Pulse Welding , 2010 .

[20]  Shinji Sato,et al.  Prediction of Distortion Produced on Welded Structures during Assembly Using Inherent Deformation and Interface Element , 2009 .

[21]  Hisashi Serizawa,et al.  Numerical Study of Joining Process in Magnetic Pressure Seam Welding , 2009 .

[22]  Sachin D. Kore,et al.  Electromagnetic impact welding of Mg to Al sheets , 2009 .

[23]  I. Hurtado,et al.  Experimental and Numerical Study of Electromagnetic Forming of AZ31B Magnesium Alloy Sheet , 2009 .

[24]  Mike Burger,et al.  Introduction of an Electromagnetism Module in LS-DYNA for Coupled Mechanical-Thermal-Electromagnetic Simulations , 2009 .

[25]  Heribert Blum,et al.  An arbitrary Lagrangian Eulerian approach to the three-dimensional simulation of electromagnetic forming , 2009 .

[26]  M. A. Bahmani,et al.  3D Simulation of magnetic field distribution in electromagnetic forming systems with field-shaper , 2009 .

[27]  Sachin D. Kore,et al.  Electromagnetic impact welding of aluminum to stainless steel sheets , 2008 .

[28]  A. Tekkaya,et al.  Analysis of Different Die Materials for the Electromagnetic Sheet Metal Forming Process , 2008 .

[29]  A. Tekkaya,et al.  Design and Analysis of a Deep Drawing and Inprocess Electromagnetic Sheet Metal Forming Process , 2008 .

[30]  Alexander Brosius,et al.  Process Analysis and Physical Simulation of Electromagnetic Joining of Thin-Walled parts , 2008 .

[31]  Anupam Vivek,et al.  Coupling Experiment and Simulation in Electromagnetic Forming Using Photon Doppler Velocimetry , 2008 .

[32]  W. Hartmann,et al.  High-current Capability of Coaxial Cables in Magnetoforming Applications , 2008 .

[33]  Glenn S. Daehn,et al.  Flanging and Hemming of Auto Body Panels using the Electro Magnetic Forming technology , 2008 .

[34]  Kwang-Jin Lee,et al.  Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding , 2007 .

[35]  N. Triantafyllidis,et al.  Theory of necking localization in unconstrained electromagnetic expansion of thin sheets , 2007 .

[36]  E. Uhlmann,et al.  Wirkung des Magnetimpulsverfahrens auf die Nachhaltigkeit in der Produktentstehungsphase , 2007 .

[37]  Sachin D. Kore,et al.  Effect of process parameters on electromagnetic impact welding of aluminum sheets , 2007 .

[38]  Glenn S. Daehn,et al.  Agile manufacturing of a micro-embossed case by a two-step electromagnetic forming process , 2007 .

[39]  Glenn S. Daehn,et al.  Straight Hemming of Aluminum Sheet Panels Using the Electromagnetic Forming Technology: First Approach , 2007 .

[40]  Alexander Brosius,et al.  Integration of Electromagnetic Calibration into the Deep Drawing Process of an Industrial Demonstrator Part , 2007 .

[41]  Nicolas Triantafyllidis,et al.  Forming limits for electromagnetically expanded aluminum alloy tubes: Theory and experiment , 2007 .

[42]  Sergey Fedorovich Golovashchenko,et al.  Material Formability and Coil Design in Electromagnetic Forming , 2007 .

[43]  M. Kleiner,et al.  Influence of the Workpiece Stiffness on the Electromagnetic Sheet Metal Forming Process into Dies , 2007 .

[44]  J. Larkiola,et al.  High Velocity Forming of Magnesium and Titanium Sheets , 2007 .

[45]  H. Schneider.  Untersuchungen über das Verhalten von Holzwerkstoff-Platten bei Stoßbeanspruchung sowie über ihren dynamischen Elastizitäts-und Schubmodul , 1966, Holz als Roh- und Werkstoff.

[46]  A. Tekkaya,et al.  Characteristics of Composite Extruded Tubes for Joining by Electromagnetic Compression , 2007 .

[47]  Heribert Blum,et al.  Algorithmic formulation and numerical implementation of coupled electromagnetic‐inelastic continuum models for electromagnetic metal forming , 2006 .

[48]  M. Kleiner,et al.  Characterisation of extruded magnesium profiles for electromagnetic joining , 2006 .

[49]  Mitsuhiro Watanabe,et al.  Interfacial Microstructure of Magnetic Pressure Seam Welded Al-Fe, Al-Ni and Al-Cu Lap Joints , 2006 .

[50]  Daniel H. Dolan,et al.  Foundations of VISAR analysis. , 2006 .

[51]  E. El-Magd,et al.  Characterization, modelling and simulation of deformation and fracture behaviour of the light-weight wrought alloys under high strain rate loading , 2006 .

[52]  Matthias Kleiner,et al.  Investigation of force-fit joints produced by electromagnetic tube compression , 2006 .

[53]  Matthias Kleiner,et al.  Strength of Tubular Joints Made by Electromagnetic Compression at Quasistatic and Cyclic Loading , 2006 .

[54]  N. Bessonov,et al.  Design and Testing of Coils for Pulsed Electromagnetic Forming , 2006 .

[55]  Reimund Neugebauer,et al.  A Production-oriented Approach in Electromagnetic Forming of Metal Sheets , 2006 .

[56]  G. Daehn,et al.  Electromagnetic Springback Reshaping , 2006 .

[57]  G. Daehn,et al.  Design, Construction, and Applications of the Uniform Pressure Electromagnetic Actuator , 2006 .

[58]  M. Pignol,et al.  3D Finite Element Modeling of Electromagnetic Forming Processes , 2006 .

[59]  S. Golovashchenko.  Electromagnetic Forming and Joining for Automotive Applications , 2006 .

[60]  Matthias Kleiner,et al.  Investigation of the Process Chain Bending-Electromagnetic compression-Hydroforming on the Basis of an Industrial Demonstrator Part , 2006 .

[61]  Sergey Fedorovich Golovashchenko,et al.  Contributing Factors to the Increased Formability Observed in Electromagnetically Formed Aluminum Alloy Sheet , 2006 .

[62]  A. Welleman,et al.  High Power Semiconductor Devices and Solid State Switches for Pulsed Discharge Applications , 2006 .

[63]  Glenn S. Daehn,et al.  A uniform pressure electromagnetic actuator for forming flat sheets , 2007 .

[64]  M. Finn,et al.  Electromagnetic forming of aluminum alloy sheet: Free-form and cavity fill experiments and model , 2005 .

[65]  Glenn S. Daehn,et al.  Formability of steel sheet in high velocity impact , 2005 .

[66]  Pradip K. Saha.  Electromagnetic Forming of Various Aircraft Components , 2005 .

[67]  Haiping Yu,et al.  Effect of field shaper on magnetic pressure in electromagnetic forming , 2005 .

[68]  S. Golovashchenko.  Springback Calibration Using Pulsed Electromagnetic Field , 2005 .

[69]  Soo-Ik Oh,et al.  Design of axial/torque joint made by electromagnetic forming , 2005 .

[70]  Karl Roll,et al.  Transient Simulation of Electromagnetic Forming of Aluminium Tubes , 2005 .

[71]  David R. Goosman,et al.  Velocimetry using heterodyne techniques , 2004, International Congress on High-Speed Imaging and Photonics.

[72]  J. Domblesky,et al.  Elevated temperature and strain rate constitutive data for process simulation , 2005 .

[73]  Sergey Fedorovich Golovashchenko,et al.  The Effect of Tool–Sheet Interaction on Damage Evolution in Electromagnetic Forming of Aluminum Alloy Sheet , 2005 .

[74]  Mustapha Abouridouane,et al.  Bruchverhalten von Leichtmetallen unter Impact-Beanspruchung , 2005 .

[75]  T. Aizawa,et al.  Application of Magnetic Pulse Welding for Aluminum Alloys and SPCC Steel Sheets Joint , 2005 .

[76]  Tatsuhiko Aizawa,et al.  Impact Seam Welding with Magnetic Pressure for Aluminum Sheets , 2004 .

[77]  Athanasios G. Mamalis,et al.  Electromagnetic forming and powder processing: Trends and developments , 2004 .

[78]  E. Uhlmann,et al.  New Impulses in the Forming of Magnesium Sheet Metals , 2004 .

[79]  N. Bessonov,et al.  Numerical Simulation of Pulsed Electromagnetic Stamping Processes , 2004 .

[80]  O. Gafri,et al.  Pulsed Power Forming , 2004 .

[81]  Charlotte Beerwald,et al.  Design and Adaptation of EMF Equipment - From Direct Acting Multi-turn Coils to Separable Tool Coils for Electromagnetic Tube Compression , 2004 .

[82]  Matthias Kleiner,et al.  Electromagnetic Compression as Preforming Operation for Tubular Hydroforming Parts , 2004 .

[83]  Sergey Fedorovich Golovashchenko,et al.  Formability and Damage in Electromagnetically Formed AA5754 and AA6111 , 2004 .

[84]  E. El-Magd,et al.  High Speed Forming of the Light-Weight Wrought Alloys , 2004 .

[85]  Vincent J. Vohnout,et al.  Improved Formability by Control of Strain Distribution in Sheet Stamping Using Electromagnetic Impulses , 2004 .

[86]  C. Trujillo,et al.  Study of high strain rate plastic deformation of low carbon microalloyed steels using experimental observation and computational modeling , 2003 .

[87]  Michael J. Worswick,et al.  Electromagnetic forming of aluminium alloy sheet , 2003 .

[88]  S. Ahzi,et al.  Continuum damage modeling for ductile metals under high strain rate deformation , 2003 .

[89]  Alexander Brosius,et al.  Determination of flow curves at high strain rates using the electromagnetic forming process and an iterative finite element simulation scheme , 2003 .

[90]  Essam El-Magd,et al.  Constitutive modelling of CK45N, AlZnMgCu1.5 and Ti-6Al-4V in a wide range of strain rate and temperature , 2003 .

[91]  Adrian Istrate.  Verfahrensentwicklung zum Walzprofilieren von Strukturbauteilen mit über der Längsachse veränderlichen Querschnitten , 2003 .

[92]  R. Lerch,et al.  Multigrid methods for the three-dimensional simulation of nonlinear magnetomechanical systems , 2002 .

[93]  S. Thiruvarudchelvan,et al.  The potential role of flexible tools in metal forming , 2002 .

[94]  Z. Duan,et al.  The application of B–P constitutive equations in finite element analysis of high velocity impact , 2001 .

[95]  Hideki Hata,et al.  Local deformation and buckling of a cylindrical Al tube under magnetic impulsive pressure , 1999 .

[96]  Y. Murakoshi,et al.  Inside bead forming of aluminum tube by electro-magnetic forming , 1998 .

[97]  Jetting in Oblique, Asymmetric Impacts , 1998 .

[98]  Glenn S. Daehn,et al.  Modeling of electromagnetically formed sheet metal , 1998 .

[99]  Vincent J. Vohnout.  A hybrid quasi-static/dynamic process for forming large sheet metal parts from aluminum alloys / , 1998 .

[100]  Glenn S. Daehn,et al.  Effect of velocity on flow localization in tension , 1996 .

[101]  Glenn S. Daehn,et al.  Hyperplasticity: Increased forming limits at high workpiece velocity , 1994 .

[102]  W. Hwang,et al.  Joining of copper tube to polyurethane tube by electromagnetic pulse forming , 1993 .

[103]  Enhanced formability of interstitial free iron at high strain rates , 1992 .

[104]  W. Hwang,et al.  Electromagnetic joining of aluminum tubes on polyurethane cores , 1992 .

[105]  William H. Gourdin,et al.  Analysis and assessment of electromagnetic ring expansion as a high‐strain‐rate test , 1989 .

[106]  Masana Kato,et al.  High-Speed Forming of Metal Sheets by Electromagnetic Force , 1988 .

[107]  Makoto Murata,et al.  The effect of a field shaper in electromagnetic tube bulging , 1987 .

[108]  R. Armstrong,et al.  Dislocation-mechanics-based constitutive relations for material dynamics calculations , 1987 .

[109]  F. Montheillet,et al.  DUCTILITY AND FLOW RULE OF TANTALUM AT 20°C AND 500°C , 1985 .

[110]  L. Meyer,et al.  Dynamic Behavior of High Strength Steels Under Tension , 1981 .

[111]  W. F. Brown,et al.  Pulsed magnetic welding of breeder reactor fuel pin end closures , 1978 .

[112]  J. Jabłoński,et al.  Analysis of the electromagnetic forming process , 1978 .

[113]  S.T.S. Al-Hassani,et al.  On the Parameters of the Magnetic Forming Process , 1974 .

[114]  L. M. Barker,et al.  Laser interferometer for measuring high velocities of any reflecting surface , 1972 .

[115]  J. Ruge.  Technologie der Werkstoffe , 1972 .

[116]  E. J. Bruno,et al.  High-velocity forming of metals , 1968 .

[117]  W. W. Wood.  Experimental mechanics at velocity extremes —Very high strain rates , 1967 .

[118]  K. D. Srivastava,et al.  Design of Efficient Flux Concentrators for Pulsed High Magnetic Fields , 1965 .

[119]  D. Brower.  Magnetic-Pulse Forming , 1962 .

[120]  E. Platner,et al.  Flux Concentrator for High‐Intensity Pulsed Magnetic Fields , 1959 .

[121]  Harold P. Furth,et al.  Production and Use of High Transient Magnetic Fields. I , 1956 .

[122]  George Sachs,et al.  Principles and methods of sheet-metal fabricating , 1951 .

[123]  J. H. Hollomon,et al.  Effect of Strain Rate Upon Plastic Flow of Steel , 1944 .

[124]  Concentrator of Eddy Currents for Zonal Heating of Steel Parts , 1940 .

[125]  P. L. Kapitza,et al.  A method of producing strong magnetic fields , 1924 .

[126]  E. F. Northrup.  Some Newly Observed Manifestations of Forces in the Interior of an Electric Conductor , 1907 .

[127]  Horace Lamb,et al.  XIII. On electrical motions in a spherical conductor , 1883, Philosophical Transactions of the Royal Society of London.