An Overview of Hydrogel-Based Bioinks for 3D Bioprinting of Soft Tissues

It has been widely perceived that three-dimensional bioprinted synthetic tissues and organ can be a clinical treatment option for damaged or diseased tissue repair and replacement. Conventional tissue engineering approaches have limited control over the regeneration of scaffold geometries and cell distribution. With the advancement of new biomaterials and additive manufacturing techniques, it is possible to develop physiologically relevant functional tissues or organs with living cells, bioactive molecules and growth factors within predefined complex 3D geometries. In this perspective, this review discusses how hydrogel-based bioinks can be used to mimic native tissue-like extracellular matrix environment, with optimal mechanical and structural integrity for patient-specific tissue regeneration, in reference to advanced bioprinting technologies to bioprint multitude of multicomponent bioinks. This review also summarizes various bioprinting techniques, the gelation and biodegradation mechanisms of hydrogel-based bioinks, the properties required for ideal bioink, challenges to design bioinks, as well as reviews the fabrication of 3D printed cardiac tissue, cartilages, brain-like tissue, bionic ear, and urinary system.

[1]  C. van Nostrum,et al.  Novel crosslinking methods to design hydrogels. , 2002, Advanced drug delivery reviews.

[2]  B. Diehl-seifert,et al.  Alginate/silica composite hydrogel as a potential morphogenetically active scaffold for three-dimensional tissue engineering , 2013 .

[3]  P. R. van Weeren,et al.  Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. , 2013, Macromolecular bioscience.

[4]  Kyunga Na,et al.  Effect of solution viscosity on retardation of cell sedimentation in DLP 3D printing of gelatin methacrylate/silk fibroin bioink , 2017 .

[5]  P. Bártolo,et al.  Additive manufacturing of tissues and organs , 2012 .

[6]  M. Waterman,et al.  A three-dimensional in vitro model of tumor cell intravasation. , 2014, Integrative biology : quantitative biosciences from nano to macro.

[7]  F. Jacobsen,et al.  Methacrylated gelatin/hyaluronan-based hydrogels for soft tissue engineering , 2017, Journal of tissue engineering.

[8]  Anders Lindahl,et al.  Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo , 2017, PloS one.

[9]  Elise M. Stewart,et al.  3D printing of layered brain-like structures using peptide modified gellan gum substrates. , 2015, Biomaterials.

[10]  A. Khademhosseini,et al.  Carbon nanotube reinforced hybrid microgels as scaffold materials for cell encapsulation. , 2012, ACS nano.

[11]  Ali Khademhosseini,et al.  Synthesis and characterization of photocrosslinkable gelatin and silk fibroin interpenetrating polymer network hydrogels. , 2011, Acta biomaterialia.

[12]  Liang Ma,et al.  Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery. , 2015, Biomaterials.

[13]  A. Khademhosseini,et al.  Cell‐laden Microengineered and Mechanically Tunable Hybrid Hydrogels of Gelatin and Graphene Oxide , 2013, Advanced materials.

[14]  Wai Yee Yeong,et al.  Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review , 2016, Advanced healthcare materials.

[15]  A. Khademhosseini,et al.  Carbon-nanotube-embedded hydrogel sheets for engineering cardiac constructs and bioactuators. , 2013, ACS nano.

[16]  Ibrahim T. Ozbolat,et al.  Tissue strands as “bioink” for scale-up organ printing , 2014, 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[17]  Enas M. Ahmed,et al.  Hydrogel: Preparation, characterization, and applications: A review , 2013, Journal of advanced research.

[18]  Eben Alsberg,et al.  Degradation of Partially Oxidized Alginate and Its Potential Application for Tissue Engineering , 2001, Biotechnology progress.

[19]  M. Ahearne.  Introduction to cell–hydrogel mechanosensing , 2014, Interface Focus.

[20]  L. Griffith,et al.  Synthesis and Characterization of Enzymatically-Cross-Linked Poly(ethylene glycol) Hydrogels , 1997 .

[21]  Shaochen Chen,et al.  Light-assisted direct-write of 3D functional biomaterials. , 2014, Lab on a chip.

[22]  Ibrahim T. Ozbolat,et al.  Bioprinting Toward Organ Fabrication: Challenges and Future Trends , 2013, IEEE Transactions on Biomedical Engineering.

[23]  Ali Khademhosseini,et al.  Synthesis and characterization of tunable poly(ethylene glycol): gelatin methacrylate composite hydrogels. , 2011, Tissue engineering. Part A.

[24]  byBrooke LaBranche,et al.  3 D bioprinting of tissues and organs , 2017 .

[25]  M. Kurisawa,et al.  An injectable enzymatically crosslinked hyaluronic acid- hydrogel system with independent tuning of mechanical strength and gelation rate. , 2008, Soft matter.

[26]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[27]  Josep A Planell,et al.  Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers , 2014, Biofabrication.

[28]  Stuart Kyle,et al.  ‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art , 2017, Advanced healthcare materials.

[29]  David L. Kaplan,et al.  Enzymatically crosslinked silk-hyaluronic acid hydrogels. , 2017, Biomaterials.

[30]  Ibrahim T. Ozbolat,et al.  The bioink: A comprehensive review on bioprintable materials. , 2017, Biotechnology advances.

[31]  Lay Poh Tan,et al.  Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting , 2016, Molecules.

[32]  Deok‐Ho Kim,et al.  Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.

[33]  T. Park,et al.  Stereocomplex formation between enantiomeric PLA–PEG–PLA triblock copolymers: Characterization and use as protein‐delivery microparticulate carriers , 1999 .

[34]  J. Leroux,et al.  Novel injectable neutral solutions of chitosan form biodegradable gels in situ. , 2000, Biomaterials.

[35]  Marcel A. Heinrich,et al.  Rapid Continuous Multimaterial Extrusion Bioprinting , 2017, Advanced materials.

[36]  Luca Gasperini,et al.  Natural polymers for the microencapsulation of cells , 2014, Journal of The Royal Society Interface.

[37]  Kristi S Anseth,et al.  Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility. , 2009, Biomaterials.

[38]  Ali Khademhosseini,et al.  3D biofabrication strategies for tissue engineering and regenerative medicine. , 2014, Annual review of biomedical engineering.

[39]  L. Niklason,et al.  Scaffold-free vascular tissue engineering using bioprinting. , 2009, Biomaterials.

[40]  A Tirella,et al.  A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds , 2009, Biofabrication.

[41]  Michael C. McAlpine,et al.  3D Printed Bionic Ears , 2013, Nano letters.

[42]  Xiaofeng Cui,et al.  Thermal inkjet printing in tissue engineering and regenerative medicine. , 2012, Recent patents on drug delivery & formulation.

[43]  Hyunjoon Kong,et al.  A bio-inspired, microchanneled hydrogel with controlled spacing of cell adhesion ligands regulates 3D spatial organization of cells and tissue. , 2015, Biomaterials.

[44]  Fabien Guillemot,et al.  Laser-assisted cell printing: principle, physical parameters versus cell fate and perspectives in tissue engineering. , 2010, Nanomedicine.

[45]  Marcel A. Heinrich,et al.  3D‐Bioprinted Mini‐Brain: A Glioblastoma Model to Study Cellular Interactions and Therapeutics , 2019, Advanced materials.

[46]  V Mironov,et al.  Biofabrication: a 21st century manufacturing paradigm , 2009, Biofabrication.

[47]  Wei Sun,et al.  Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication–Based Direct Cell Writing , 2008 .

[48]  R. Samanipour,et al.  A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks , 2015, Biofabrication.

[49]  Ki-Hwan Nam,et al.  Fabrication of poly(ethylene glycol): gelatin methacrylate composite nanostructures with tunable stiffness and degradation for vascular tissue engineering , 2014, Biofabrication.

[50]  Yoshito Ikada,et al.  Stereocomplex formation between enantiomeric poly(lactides) , 1987 .

[51]  Y. S. Zhang,et al.  Effective bioprinting resolution in tissue model fabrication. , 2019, Lab on a chip.

[52]  Wei Sun,et al.  Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation , 2016, Scientific Reports.

[53]  Pu Chen,et al.  Towards artificial tissue models: past, present, and future of 3D bioprinting , 2016, Biofabrication.

[54]  I. Noh,et al.  Recent trends in bioinks for 3D printing , 2018, Biomaterials Research.

[55]  Dong-Woo Cho,et al.  Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs. , 2015, Acta biomaterialia.

[56]  Chee Kai Chua,et al.  Bioprinting: Principles and Applications , 2015 .

[57]  Manish K Jaiswal,et al.  Bioactive nanoengineered hydrogels for bone tissue engineering: a growth-factor-free approach. , 2015, ACS nano.

[58]  A. Mikos,et al.  Modeling Ewing sarcoma tumors in vitro with 3D scaffolds , 2013, Proceedings of the National Academy of Sciences.

[59]  GrigoreAlexandra,et al.  Behavior of Encapsulated MG-63 Cells in RGD and Gelatine-Modified Alginate Hydrogels , 2014 .

[60]  Gordon G Wallace,et al.  Bio-ink for on-demand printing of living cells. , 2013, Biomaterials science.

[61]  Ali Khademhosseini,et al.  Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells. , 2012, Lab on a chip.

[62]  Brian Derby,et al.  Printing and Prototyping of Tissues and Scaffolds , 2012, Science.

[63]  T. Scheper,et al.  Gelatin-Methacryloyl (GelMA) Hydrogels with Defined Degree of Functionalization as a Versatile Toolkit for 3D Cell Culture and Extrusion Bioprinting , 2018, Bioengineering.

[64]  Yong Huang,et al.  Laser-based direct-write techniques for cell printing , 2010, Biofabrication.

[65]  Ali Khademhosseini,et al.  Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs , 2019, Materials today. Bio.

[66]  E. Bakota,et al.  Enzymatic cross-linking of a nanofibrous peptide hydrogel. , 2011, Biomacromolecules.

[67]  Shlomo Magdassi,et al.  High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles , 2016, Science Advances.

[68]  Ying Mei,et al.  Engineering alginate as bioink for bioprinting. , 2014, Acta biomaterialia.

[69]  Mario I. Romero-Ortega,et al.  Brain on a bench top , 2016 .

[70]  Léa J Pourchet,et al.  Human Skin 3D Bioprinting Using Scaffold‐Free Approach , 2017, Advanced healthcare materials.

[71]  Dietmar W Hutmacher,et al.  Gelatine methacrylamide-based hydrogels: an alternative three-dimensional cancer cell culture system. , 2014, Acta biomaterialia.

[72]  Ali Khademhosseini,et al.  Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments , 2018, Biofabrication.

[73]  Roberto Parra-Saldivar,et al.  Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues , 2018, Advanced materials.

[74]  A. Schambach,et al.  Skin tissue generation by laser cell printing , 2012, Biotechnology and bioengineering.

[75]  Xian Jin,et al.  Visible light-based stereolithography bioprinting of cell-adhesive gelatin hydrogels , 2017, 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[76]  Ibrahim T. Ozbolat,et al.  Current advances and future perspectives in extrusion-based bioprinting. , 2016, Biomaterials.

[77]  E. Kapetanovic,et al.  Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells. , 2014, Acta biomaterialia.

[78]  Y. S. Zhang,et al.  Reduced Graphene Oxide-GelMA Hybrid Hydrogels as Scaffolds for Cardiac Tissue Engineering. , 2016, Small.

[79]  Hon Fai Chan,et al.  3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures , 2015, Advanced materials.

[80]  K H Kang,et al.  Quantitative optimization of solid freeform deposition of aqueous hydrogels , 2013, Biofabrication.

[81]  T. Boland,et al.  Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells , 2010, Biotechnology and bioengineering.

[82]  Ali Khademhosseini,et al.  Bioinks for 3D bioprinting: an overview. , 2018, Biomaterials science.

[83]  Bikramjit Basu,et al.  Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment , 2016 .

[84]  Shintaroh Iwanaga,et al.  Three-dimensional inkjet biofabrication based on designed images , 2011, Biofabrication.

[85]  Jos Malda,et al.  Reinforcement of hydrogels using three-dimensionally printed microfibres , 2015, Nature Communications.

[86]  Ali Khademhosseini,et al.  The mechanical properties and cytotoxicity of cell-laden double-network hydrogels based on photocrosslinkable gelatin and gellan gum biomacromolecules. , 2012, Biomaterials.

[87]  Ibrahim T. Ozbolat,et al.  A comprehensive review on droplet-based bioprinting: Past, present and future. , 2016, Biomaterials.

[88]  Anthony Atala,et al.  3D bioprinting of urethra with PCL/PLCL blend and dual autologous cells in fibrin hydrogel: An in vitro evaluation of biomimetic mechanical property and cell growth environment. , 2017, Acta biomaterialia.

[89]  Hongbo Wang,et al.  A highly tough and stiff supramolecular polymer double network hydrogel , 2018, Polymer.

[90]  D. Cho,et al.  3D printing of cell-laden constructs for heterogeneous tissue regeneration , 2013 .

[91]  Alessandro Giacomello,et al.  Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction. , 2015, Biomaterials.

[92]  A. Hadjizadeh,et al.  Design and fabrication of GelMA/chitosan nanoparticles composite hydrogel for angiogenic growth factor delivery , 2017, Artificial cells, nanomedicine, and biotechnology.

[93]  Fabien Guillemot,et al.  Cell patterning technologies for organotypic tissue fabrication. , 2011, Trends in biotechnology.

[94]  Yanchuan Guo,et al.  Development of a Photo-Crosslinking, Biodegradable GelMA/PEGDA Hydrogel for Guided Bone Regeneration Materials , 2018, Materials.

[95]  C. Highley,et al.  Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels , 2015, Advanced materials.

[96]  X. Wang,et al.  Hyaluronic acid nanogels with enzyme-sensitive cross-linking group for drug delivery. , 2015, Journal of controlled release : official journal of the Controlled Release Society.

[97]  Brian A. Aguado,et al.  Improving viability of stem cells during syringe needle flow through the design of hydrogel cell carriers. , 2012, Tissue engineering. Part A.

[98]  A. Khademhosseini,et al.  Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink , 2016, Advanced materials.

[99]  Horst Fischer,et al.  GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis , 2017, Biofabrication.

[100]  Alexandra L. Rutz,et al.  A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels , 2015, Advanced materials.

[101]  Karoly Jakab,et al.  Tissue engineering by self-assembly and bio-printing of living cells , 2010, Biofabrication.

[102]  D. Seliktar.  Designing Cell-Compatible Hydrogels for Biomedical Applications , 2012, Science.

[103]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[104]  Huaping Tan,et al.  Injectable, Biodegradable Hydrogels for Tissue Engineering Applications , 2010, Materials.

[105]  Christopher B. Williams,et al.  3D Printing Polymers with Supramolecular Functionality for Biological Applications. , 2017, Biomacromolecules.

[106]  Benjamin M Wu,et al.  Recent advances in 3D printing of biomaterials , 2015, Journal of Biological Engineering.

[107]  K. Masters,et al.  Decoupling the effects of stiffness and fiber density on cellular behaviors via an interpenetrating network of gelatin-methacrylate and collagen. , 2017, Biomaterials.

[108]  Umut A. Gurkan,et al.  Engineering Anisotropic Biomimetic Fibrocartilage Microenvironment by Bioprinting Mesenchymal Stem Cells in Nanoliter Gel Droplets , 2014, Molecular pharmaceutics.

[109]  A. Gaharwar,et al.  Advanced Bioinks for 3D Printing: A Materials Science Perspective , 2016, Annals of Biomedical Engineering.

[110]  J Malda,et al.  Bioprinting of hybrid tissue constructs with tailorable mechanical properties , 2011, Biofabrication.

[111]  Ali Navaei,et al.  Gold nanorod-incorporated gelatin-based conductive hydrogels for engineering cardiac tissue constructs. , 2016, Acta biomaterialia.

[112]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[113]  Chaozong Liu,et al.  Design and Development of Three-Dimensional Scaffolds for Tissue Engineering , 2007 .

[114]  R. Muzzarelli,et al.  Chitosan stabilizes platelet growth factors and modulates stem cell differentiation toward tissue regeneration. , 2013, Carbohydrate polymers.

[115]  Pamela Robles Martinez,et al.  Fabrication of drug-loaded hydrogels with stereolithographic 3D printing. , 2017, International journal of pharmaceutics.

[116]  Nan Ma,et al.  Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration. , 2011, Biomaterials.

[117]  C A van Blitterswijk,et al.  Enzymatically-crosslinked injectable hydrogels based on biomimetic dextran-hyaluronic acid conjugates for cartilage tissue engineering. , 2010, Biomaterials.

[118]  Kristi S Anseth,et al.  Hydrogels in Healthcare: From Static to Dynamic Material Microenvironments. , 2013, Acta materialia.

[119]  Anthony Atala,et al.  Biomaterials for Integration with 3-D Bioprinting , 2014, Annals of Biomedical Engineering.

[120]  D. Cho,et al.  3D printing of composite tissue with complex shape applied to ear regeneration , 2014, Biofabrication.

[121]  Y. S. Zhang,et al.  Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting , 2018, Advanced materials.

[122]  K. Leong,et al.  Scaffolding in tissue engineering: general approaches and tissue-specific considerations , 2008, European Spine Journal.

[123]  P. Dubruel,et al.  The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.

[124]  Ibrahim T. Ozbolat,et al.  Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink , 2016, Scientific Reports.

[125]  T. Scheibel,et al.  Strategies and Molecular Design Criteria for 3D Printable Hydrogels. , 2016, Chemical reviews.

[126]  P. Gatenholm,et al.  3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.

[127]  Ahmed Aied,et al.  Bioprinting Using Mechanically Robust Core-Shell Cell-Laden Hydrogel Strands. , 2017, Macromolecular bioscience.

[128]  Xin Fu,et al.  Structurally and Functionally Optimized Silk‐Fibroin–Gelatin Scaffold Using 3D Printing to Repair Cartilage Injury In Vitro and In Vivo , 2017, Advanced materials.