Study on microstructures and properties of carbide-free and carbide-bearing bainitic steels

[1]  F. C. Zhang,et al.  Study on carbide-bearing and carbide-free bainitic steels and their wear resistance , 2017 .

[2]  F. C. Zhang,et al.  Low cycle fatigue behavior in a medium-carbon carbide-free bainitic steel , 2016 .

[3]  F. C. Zhang,et al.  Cyclic deformation behaviors of a high strength carbide-free bainitic steel , 2016 .

[4]  Fucheng Zhang,et al.  Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels , 2016 .

[5]  F. C. Zhang,et al.  Improving impact toughness of high-C–Cr bearing steel by Si–Mo alloying and low-temperature austempering , 2015 .

[6]  Fucheng Zhang,et al.  Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel , 2015 .

[7]  T. Sourmail,et al.  On the role of microstructure in governing the fatigue behaviour of nanostructured bainitic steels , 2015 .

[8]  H. Bhadeshia,et al.  Bainite in Steels , 2019 .

[9]  F. Caballero,et al.  Influence of transformation temperature on carbide precipitation sequence during lower bainite formation , 2014 .

[10]  H. Matsuda,et al.  Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomograp , 2014 .

[11]  P. Hodgson,et al.  A novel thermomechanical approach to produce a fine ferrite and low-temperature bainitic composite microstructure , 2013 .

[12]  H. Bhadeshia,et al.  Experimental evidence for non-cubic bainitic ferrite , 2013 .

[13]  H. Bhadeshia,et al.  The first bulk nanostructured metal , 2013, Science and technology of advanced materials.

[14]  S. Sangal,et al.  Critical isothermal temperature and optimum mechanical behaviour of high Si-containing bainitic steels , 2012 .

[15]  M. Santofimia,et al.  Temperature dependence of carbon supersaturation of ferrite in bainitic steels , 2012 .

[16]  José Costa,et al.  Low-cycle fatigue behaviour of 34CrNiMo6 high strength steel , 2012 .

[17]  Jingkai Yang,et al.  High-cycle bending fatigue behaviour of nanostructured bainitic steel , 2012 .

[18]  E. Emadoddin,et al.  Effect of retained austenite characteristics on fatigue behavior and tensile properties of transformation induced plasticity steel , 2011 .

[19]  M. Thuvander,et al.  Microstructures and hardness of as-quenched martensites (0.10.5%C) , 2011 .

[20]  F. Caballero,et al.  Carbon supersaturation of ferrite in a nanocrystalline bainitic steel , 2010 .

[21]  B. Bai,et al.  Very high cycle fatigue mechanism of carbide-free bainite/martensite steel micro-alloyed with Nb , 2009 .

[22]  M. Santofimia,et al.  Theoretical design and advanced microstructure in super high strength steels , 2009 .

[23]  E. Pereloma,et al.  Cyclic Deformation of Advanced High-Strength Steels: Mechanical Behavior and Microstructural Analysis , 2009 .

[24]  K. A. Padmanabhan,et al.  Fatigue behavior of a multiphase medium carbon V-bearing microalloyed steel processed through two thermomechanical routes , 2008 .

[25]  Francisca García Caballero,et al.  Ultra-high-strength Bainitic Steels , 2005 .

[26]  Heinz Werner Höppel,et al.  Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation , 2004 .

[27]  H. Aglan,et al.  Mechanical and fracture behavior of bainitic rail steel , 2004 .

[28]  H. Bhadeshia,et al.  Three-Dimensional Atom Probe Analysis of Carbon Distribution in Low-Temperature Bainite , 2004 .

[29]  H. Bhadeshia,et al.  Acceleration of Low-temperature Bainite , 2003 .

[30]  K. A. Padmanabhan,et al.  Low cycle fatigue behavior of a multiphase microalloyed medium carbon steel: comparison between ferrite–pearlite and quenched and tempered microstructures , 2003 .

[31]  Yong-Seog Kim,et al.  Thermal stability and mechanical properties of ultrafine grained low carbon steel , 2000 .

[32]  S. Matsuoka,et al.  The combined effect of molybdenum and nitrogen on the fatigued microstructure of 316 type austenitic stainless steel , 1999 .

[33]  V. Gerold,et al.  Room temperature deformation mechanisms in Nimonic 80A , 1985 .

[34]  S. Mediratta,et al.  Influence of ferrite-martensite microstructural morphology on the low cycle fatigue of a dual-phase steel , 1985 .

[35]  J. Grosskreutz.  strengthening and fracture in fatigue (approaches for achieving high fatigue strength) , 1972 .

[36]  L. Coffin,et al.  A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal , 1954, Journal of Fluids Engineering.

[37]  Kang Jie,et al.  Research progress of bainitic steel used for railway crossing , 2013 .

[38]  M. Santofimia,et al.  New Experimental Evidence on the Incomplete Transformation Phenomenon in Steel. , 2009 .

[39]  S. Babu,et al.  Atomic scale observations of bainite transformation in a high carbon high silicon steel , 2007 .

[40]  J. P. Lucas,et al.  Cyclic strain hardening of polygonal and acicular ferrite/bainite microstructures in microalloyed steels in the temperature range − 150°C to 27°C , 1985 .