A novel approach for efficiency and power density optimization of an Axial Flux Permanent Magnet generator through genetic algorithm and finite element analysis

This study puts forth a multi-objective optimization of the efficiency and power density of a low speed Axial Flux Permanent Magnet (AFPM) synchronous generator with the output power and rated speed amplitude of 1 kW and 100 rpm. Firstly, a brief review of different AFPM machine topologies has been provided and double sided interior slotted stator (known as TORUS-S) structure has been selected as the most suitable structure for the current application. The optimization problem was formulated by means of general sizing equations and then genetic algorithm was utilized. Innovatively, this study introduces a novel fitness function as its original contribution which offers a tool for ascertaining the priority of objective functions. This fitness function includes two variables whereby an increase in either of them leads to more improvement in one of the objective functions than in the other. The merits of this method are especially palpable in situations where it is necessary to prioritize the objective functions as is indeed the case with generators used in wind turbines which should have not only a high efficiency but also a reduced weight and volume. Finally, the results are verified through the three dimensional Finite Element Method.

[1]  P. Campbell.  Principles of a permanent-magnet axial-field d.c. machine , 1974 .

[2]  J. Pyrhonen,et al.  Modeling of axial flux permanent-magnet machines , 2004, IEEE Transactions on Industry Applications.

[3]  Thomas A. Lipo,et al.  Design and 3D electromagnetic field analysis of non-slotted and slotted TORUS type axial flux surface mounted permanent magnet disc machines , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[4]  Peter Sergeant,et al.  Optimized Design Considering the Mass Influence of an Axial Flux Permanent-Magnet Synchronous Generator With Concentrated Pole Windings , 2010, IEEE Transactions on Magnetics.

[5]  F. Profumo,et al.  A low loss permanent magnet brushless DC motor utilizing tape wound amorphous iron , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[6]  F. Leonardi,et al.  A general approach to sizing and power density equations for comparison of electrical machines , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[7]  W. P. Hew,et al.  Design, Analysis, and Prototyping of an Axial-Flux Permanent Magnet Motor Based on Genetic Algorithm and Finite-Element Analysis , 2013, IEEE Transactions on Magnetics.

[8]  Thomas A. Lipo,et al.  A comparison of power density for axial flux machines based on general purpose sizing equations , 1999 .

[9]  B. J. Chalmers,et al.  An axial-flux permanent-magnet generator for a gearless wind energy system , 1999 .

[10]  D. Howe,et al.  Influence of design parameters on cogging torque in permanent magnet machines , 1997, 1997 IEEE International Electric Machines and Drives Conference Record.

[11]  Ji-Young Lee,et al.  Design of an Axial Flux Permanent Magnet Generator for a Portable Hand Crank Generating System , 2012, IEEE Transactions on Magnetics.

[12]  J. Fletcher.  Distribution , 2009, BMJ : British Medical Journal.

[13]  Jian Pan,et al.  Design and performance of large scale direct-driven permanent magnet wind generators , 2011, 2011 International Conference on Power Engineering, Energy and Electrical Drives.

[14]  L. Soderlund,et al.  Design of an axial flux permanent magnet wind power generator , 1997 .