Effect of ply angle misalignment on out-of-plane deformation of symmetrical cross-ply CFRP laminates: Accuracy of the ply angle alignment

This paper discusses the accuracy of ply angle alignment and how it relates to out-of-plane deformation in carbon fiber reinforced plastics (CFRP) laminates. We investigated the deformation of symmetrical cross-ply laminates under hot and humid conditions. In spite of the symmetrically stacked laminates, unpredictable out-of-plane deformation occurred over time due to ply angle misalignment. The deformation was unstable and disproportionate to the absorbed moisture. A Monte Carlo simulation based on laminate theory was performed to quantify the deformation induced by the ply angle misalignment. Symmetrical cross-ply laminates were found to twist as they absorbed water when they underwent ply angle misalignments. By comparing the analytical results with experimental results, we concluded that a standard deviation of approximately 0.4° exists as ply angle misalignment in the laminates used in this study and that this slight ply angle misalignment can be a significant factor in out-of-plane deformation of cross-ply laminates.

[1]  Damiano Pasini,et al.  Optimum stacking sequence design of composite materials Part II: Variable stiffness design , 2010 .

[2]  Constantinos Soutis,et al.  Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading , 2010 .

[3]  S. W. Yurgartis.  Measurement of small angle fiber misalignments in continuous fiber composites , 1987 .

[4]  Damiano Pasini,et al.  Optimum stacking sequence design of composite materials Part I: Constant stiffness design , 2009 .

[5]  James J. Lyons,et al.  Development of optically flat mirrors using graphite/epoxy laminates , 1995, Optics & Photonics.

[6]  Wim H.M. Van Dreumel,et al.  Non Hookean Behaviour in the Fibre Direction of Carbon-Fibre Composites and the Influence of Fibre Waviness on the Tensile Properties , 1977 .

[7]  J. Morris,et al.  The effects of fibre orientation on the physical properties of composites , 1974 .

[8]  Ole Thybo Thomsen,et al.  A Novel Image Analysis Procedure for Measuring Fibre Misalignment in Unidirectional Fibre Composites , 2009 .

[9]  Peter W. R. Beaumont,et al.  The measurement and prediction of residual stresses in carbon-fibre/polymer composites , 1997 .

[10]  Anoush Poursartip,et al.  Tool–part interaction in composites processing. Part I: experimental investigation and analytical model , 2004 .

[11]  Jun Koyanagi,et al.  Analysis of Thermal Deformation on a Honeycomb Sandwich CFRP Mirror , 2010 .

[12]  E. G. Wolff.  Introduction to the Dimensional Stability of Composite Materials , 2004 .

[13]  Martin Hinckley,et al.  Statistical evaluation of the variation in laminated composite properties resulting from ply misalignment , 1990, Defense, Security, and Sensing.

[14]  Robert C. Romeo,et al.  Progress in 1m-class lightweight CFRP composite mirrors for the ULTRA Telescope , 2006, SPIE Astronomical Telescopes + Instrumentation.

[15]  Jun Koyanagi,et al.  Time-dependent out-of-plane deformation of UD-CFRP in humid environment , 2009 .

[16]  Dietmar Scheulen,et al.  Composite technology for lightweight optical mirrors , 1990, Astronomical Telescopes and Instrumentation.

[17]  R. Gibson.  Principles of Composite Material Mechanics , 1994 .

[18]  Robert C. Romeo,et al.  Advances in very lightweight composite mirror technology , 2000 .

[19]  Paul B. Willis,et al.  Dimensional stability of CFRP composites for space-based reflectors , 2001, SPIE Optics + Photonics.