Determination of the Geometry of Hidden Defects by Ultrasonic Pulse Analysis Testing

Current methods for ultrasonic inspection of metals and other solid materials are limited by their inability to determine the geometry of concealed defects if these defects are comparable in size, or smaller than the width of the ultrasonic search beam. Whenever such relatively small flaws are involved, ultrasonic pulse echo testing, if conducted at a single frequency, will yield the flaw location only, but no information on the flaw geometry. It is therefore very difficult to interpret the test results. The difficulty can be overcome by introducing the novel ultrasonic test method described in this paper. In this procedure, ultrasonic signals are utilized which contain a broad band of frequencies, and in analogy to optics, can therefore be considered as “white” ultrasonic pulses. The form and spectral energy distribution, or “color,” of such ultrasonic pulses is influenced by the geometry of a defect from which they are reflected. Hence, an analysis of the defect echo yields information on the defect con...