Energy performance of opaque building elements in summer:Analysis of a simplified calculation method in force in Italy

Abstract The Italian technical standard for calculation of building energy needs in summer allows a monthly average method, in which solar gains through opaque building elements are evaluated distinguishing between dark, intermediate or light-colored surfaces, and a fixed value of solar absorptance is assigned to each surface category. The method is aimed at ease of operation, but its steady-state calculation approach may not allow taking into proper account dynamic effects due to thermal inertia. Moreover, roofing solutions typical of Italy such as roof tiles, sealing membranes or painted sheet metal panels can show similar colors, but significantly different values of the solar absorption coefficient. On the other hand, an easy to apply calculation method may enable most designers of the building sector to take advantage of solutions for control of solar gains such as cool roofs and cool colors, thus favoring their dissemination. In this paper, the calculation method currently in use in Italy is briefly presented, with the focus on the role of opaque building elements. Either the accuracy of steady-state calculation or the reliability of the color-based evaluation approach is then discussed, analyzing by numerical simulation the actual dynamic behavior of most common types of roof element.

[1]  David J. Sailor,et al.  Mitigation of urban heat islands: materials, utility programs, updates , 1995 .

[2]  M. Santamouris,et al.  On the development, optical properties and thermal performance of cool colored coatings for the urban environment , 2007 .

[3]  Lollini,et al.  Optimisation of opaque components of the building envelope. Energy, economic and environmental issues , 2006 .

[4]  Ronnen Levinson,et al.  Cooler tile-roofed buildings with near-infrared-reflective non-white coatings , 2004 .

[5]  Antonio Libbra,et al.  Assessment and improvement of the performance of antisolar surfaces and coatings , 2011 .

[6]  Hashem Akbari,et al.  Measured energy savings from the application of reflective roofs in two small non-residential buildings , 2003 .

[7]  A. Rosenfeld,et al.  Residential cooling loads and the urban heat island—the effects of albedo , 1988 .

[8]  E. Mcpherson,et al.  The effects of roof albedo modification on cooling loads of scale model residences in Tucson, Arizona , 1997 .

[9]  Leo Rainer,et al.  Monitoring the energy-use effects of cool roofs on California commercial buildings , 2004 .

[10]  H. Akbari,et al.  Methods of creating solar-reflective nonwhite surfaces and their application to residential roofing materials , 2005 .

[11]  L. Gu,et al.  Measured and simulated performance of reflective roofing systems in residential buildings , 1998 .

[12]  Sarah Bretz,et al.  Preliminary survey of the solar reflectance of cool roofing materials , 1997 .

[13]  Antonio Libbra,et al.  Spectral response data for development of cool coloured tile coverings , 2011 .

[14]  Alberto Muscio,et al.  Experiments of thermographic landmine detection with reduced size and compressed time , 2004 .

[15]  A. Rosenfeld,et al.  Practical issues for using solar-reflective materials to mitigate urban heat islands , 1998 .

[16]  Lambros T. Doulos,et al.  Passive cooling of outdoor urban spaces. The role of materials , 2004 .

[17]  M. Santamouris,et al.  Advances on technical, policy and market aspects of cool roof technology in Europe: The Cool Roofs project , 2012 .

[18]  Alberto Muscio,et al.  Land mine detection by infrared thermography: reduction of size and duration of the experiments , 2004, IEEE Transactions on Geoscience and Remote Sensing.

[19]  Hashem Akbari,et al.  Peak power and cooling energy savings of high-albedo roofs , 1997 .

[20]  H. Akbari,et al.  Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions , 2007 .

[21]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.