Impact of the Solvation State of Lead Iodide on Its Two‐Step Conversion to MAPbI3: An In Situ Investigation

D.B. and P.C. contributed equally to this work. This work was supported by the King Abdullah University of Science and Technology (KAUST), National Natural Science Foundation of China (61604092), and National University Research Fund (GK201802005). CHESS is supported by the NSF via NSF award DMR-1332208. A.A. conceived the project. A.A., K.Z., and T.D.A. supervised the work. D.B. and P.C. performed all of the experiments. M.T., K.W., H.D., and D.-M.S. helped to acquire the GIWAXS measurements. S.(F.)L. helped with useful discussions of device fabrication. All the authors contribute to the writing of the Manuscript.

[1]  Rebecca A. Belisle,et al.  Cesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells. , 2016, The journal of physical chemistry letters.

[2]  Bengt Herbert Kasemo,et al.  Frequency and dissipation-factor responses to localized liquid deposits on a QCM electrode , 1996 .

[3]  Kun Zhang,et al.  Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition , 2014 .

[4]  Bo Qu,et al.  Improved light absorption and charge transport for perovskite solar cells with rough interfaces by sequential deposition. , 2014, Nanoscale.

[5]  Fan Zuo,et al.  Additive Enhanced Crystallization of Solution‐Processed Perovskite for Highly Efficient Planar‐Heterojunction Solar Cells , 2014, Advanced materials.

[6]  Aram Amassian,et al.  One-dimensional self-confinement promotes polymorph selection in large-area organic semiconductor thin films , 2014, Nature Communications.

[7]  Dinghan Shen,et al.  Understanding the solvent-assisted crystallization mechanism inherent in efficient organic–inorganic halide perovskite solar cells , 2014 .

[8]  Liming Ding,et al.  An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive. , 2014, Nanoscale.

[9]  Ruipeng Li,et al.  Toward Additive‐Free Small‐Molecule Organic Solar Cells: Roles of the Donor Crystallization Pathway and Dynamics , 2015, Advanced materials.

[10]  Henry J. Snaith,et al.  Direct measurement of the exciton binding energy and effective masses for charge carriers in organic–inorganic tri-halide perovskites , 2015, 1504.07025.

[11]  R. Munir,et al.  Stable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation , 2018, Advanced materials.

[12]  H. Duan,et al.  Facile preparation of high-quality perovskites for efficient solar cells via a fast conversion of wet PbI2 precursor films , 2017 .

[13]  Aram Amassian,et al.  Look fast: Crystallization of conjugated molecules during solution shearing probed in‐situ and in real time by X‐ray scattering , 2013 .

[14]  Effects of water and iso-propyl alcohol relative humidities on single wafer cleaning system performance , 2007 .

[15]  Yixin Zhao,et al.  Three-step sequential solution deposition of PbI2-free CH3NH3PbI3 perovskite , 2015 .

[16]  Olga Wodo,et al.  Vertical Phase Separation in Small Molecule:Polymer Blend Organic Thin Film Transistors Can Be Dynamically Controlled , 2016 .

[17]  R. Munir,et al.  Phase Transition Control for High-Performance Blade-Coated Perovskite Solar Cells , 2018, Joule.

[18]  J. Teuscher,et al.  Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells. , 2016, Journal of the American Chemical Society.

[19]  Min Gyu Kim,et al.  Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells , 2017, Science.

[20]  Ruixia Yang,et al.  Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells , 2016 .

[21]  T. Bein,et al.  A Closer Look into Two-Step Perovskite Conversion with X-ray Scattering. , 2015, The journal of physical chemistry letters.

[22]  Aram Amassian,et al.  Hybrid Perovskite Thin‐Film Photovoltaics: In Situ Diagnostics and Importance of the Precursor Solvate Phases , 2017, Advanced materials.

[23]  S. Shiratori,et al.  Improvement of the Dynamic Spin-Washing Effect with an Optimized Process of a Perovskite Solar Cell in Ambient Air by the Kriging Method , 2017 .

[24]  Gengfeng Zheng,et al.  Enhancing Perovskite Solar Cell Performance by Interface Engineering Using CH3NH3PbBr0.9I2.1 Quantum Dots. , 2016, Journal of the American Chemical Society.

[25]  Ahmad R. Kirmani,et al.  Effect of Solvent Environment on Colloidal‐Quantum‐Dot Solar‐Cell Manufacturability and Performance , 2014, Advanced materials.

[26]  Longlong Wu,et al.  In Situ Real‐Time Study of the Dynamic Formation and Conversion Processes of Metal Halide Perovskite Films , 2018, Advanced materials.

[27]  Yixin Zhao,et al.  Controllable Sequential Deposition of Planar CH₃NH₃PbI₃ Perovskite Films via Adjustable Volume Expansion. , 2015, Nano letters.

[28]  Q. Gong,et al.  Mesoporous PbI2 Scaffold for High‐Performance Planar Heterojunction Perovskite Solar Cells , 2016 .

[29]  J. Heo,et al.  Highly reproducible, efficient hysteresis-less CH3NH3PbI(3-x)Cl(x) planar hybrid solar cells without requiring heat-treatment. , 2016, Nanoscale.

[30]  Aram Amassian,et al.  Spin‐Cast Bulk Heterojunction Solar Cells: A Dynamical Investigation , 2013, Advanced materials.

[31]  Yan Yao,et al.  Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells. , 2015, Nanoscale.

[32]  Ruipeng Li,et al.  Carrier Transport Enhancement in Conjugated Polymers through Interfacial Self-Assembly of Solution-State Aggregates. , 2016, ACS applied materials & interfaces.

[33]  R. Munir,et al.  Improved Morphology and Efficiency of n–i–p Planar Perovskite Solar Cells by Processing with Glycol Ether Additives , 2017 .

[34]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[35]  K. Marx,et al.  Quartz crystal microbalance: a useful tool for studying thin polymer films and complex biomolecular systems at the solution-surface interface. , 2003, Biomacromolecules.

[36]  Ruipeng Li,et al.  Solvent vapor annealing in the molecular regime drastically improves carrier transport in small-molecule thin-film transistors. , 2013, ACS applied materials & interfaces.

[37]  Shuzi Hayase,et al.  Reproducible Fabrication of Efficient Perovskite-based Solar Cells: X-ray Crystallographic Studies on the Formation of CH3NH3PbI3 Layers , 2014 .

[38]  Jinsong Huang,et al.  Advances in Perovskite Solar Cells , 2016, Advanced science.

[39]  G. Boschloo,et al.  Improved morphology control using a modified two-step method for efficient perovskite solar cells. , 2014, ACS applied materials & interfaces.

[40]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[41]  Jouko Kankare,et al.  Sauerbrey Equation of Quartz Crystal Microbalance in Liquid Medium , 2002 .

[42]  Ruipeng Li,et al.  Heterogeneous Nucleation Promotes Carrier Transport in Solution‐Processed Organic Field‐Effect Transistors , 2013 .

[43]  Jing Sun,et al.  A facile way to prepare nanoporous PbI2 films and their application in fast conversion to CH3NH3PbI3 , 2016 .

[44]  Wei Zhang,et al.  In situ dynamic observations of perovskite crystallisation and microstructure evolution intermediated from [PbI6]4− cage nanoparticles , 2017, Nature Communications.

[45]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[46]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[47]  Aram Amassian,et al.  Hybrid perovskite solar cells: In situ investigation of solution-processed PbI_2 reveals metastable precursors and a pathway to producing porous thin films , 2017 .

[48]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[49]  M. Kanatzidis,et al.  Phase Transition Control for High Performance Ruddlesden–Popper Perovskite Solar Cells , 2018, Advanced materials.

[50]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[51]  Ruipeng Li,et al.  Late stage crystallization and healing during spin-coating enhance carrier transport in small-molecule organic semiconductors , 2014 .

[52]  Mercouri G Kanatzidis,et al.  Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells. , 2014, Journal of the American Chemical Society.

[53]  M. Grätzel,et al.  Mesoscopic photosystems for solar light harvesting and conversion: facile and reversible transformation of metal-halide perovskites. , 2014, Faraday discussions.

[54]  G. Gigli,et al.  Organic Gelators as Growth Control Agents for Stable and Reproducible Hybrid Perovskite‐Based Solar Cells , 2017 .

[55]  S. Sung,et al.  Controlled growth of organic–inorganic hybrid CH3NH3PbI3 perovskite thin films from phase-controlled crystalline powders , 2016 .

[56]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[57]  M. Loi,et al.  Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency , 2018 .

[58]  A. Amassian,et al.  In situ UV-visible absorption during spin-coating of organic semiconductors: a new probe for organic electronics and photovoltaics , 2014 .

[59]  Ruipeng Li,et al.  Entanglement of Conjugated Polymer Chains Influences Molecular Self‐Assembly and Carrier Transport , 2013 .

[60]  Aram Amassian,et al.  Morphology Development in Solution-Processed Functional Organic Blend Films: An In Situ Viewpoint. , 2017, Chemical reviews.

[61]  Andrew H. Proppe,et al.  Compositional and orientational control in metal halide perovskites of reduced dimensionality , 2018, Nature Materials.

[62]  Laura M. Herz,et al.  Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber , 2013, Science.

[63]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[64]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[65]  R. Munir,et al.  Blade-Coated Hybrid Perovskite Solar Cells with Efficiency > 17%: An In Situ Investigation , 2018 .