Experimental investigation on the performance of RT-44HC-nickel foam-based heat sinks for thermal management of electronic gadgets

[1]  H. Ali,et al.  Thermal performance analysis of metallic foam-based heat sinks embedded with RT-54HC paraffin: an experimental investigation for electronic cooling , 2019, Journal of Thermal Analysis and Calorimetry.

[2]  C. Park,et al.  Performance analysis of hybrid nanofluid in a heat sink equipped with sharp and streamlined micro pin-fins , 2019, Powder Technology.

[3]  C. Park,et al.  Pin-fin shape-dependent heat transfer and fluid flow characteristics of water- and nanofluid-cooled micropin-fin heat sinks: Square, circular and triangular fin cross-sections , 2019, Applied Thermal Engineering.

[4]  W. Yan,et al.  A critical review on heat transfer augmentation of phase change materials embedded with porous materials/foams , 2019, International Journal of Heat and Mass Transfer.

[5]  H. Ali,et al.  Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems , 2018, International Journal of Heat and Mass Transfer.

[6]  Man-Hoe Kim,et al.  Effect of fin shape on the thermal performance of nanofluid-cooled micro pin-fin heat sinks , 2018, International Journal of Heat and Mass Transfer.

[7]  H. Ali,et al.  Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling , 2018, International Communications in Heat and Mass Transfer.

[8]  Man-Hoe Kim,et al.  Heat transfer and pressure drop correlations of nanofluids: A state of art review , 2018, Renewable and Sustainable Energy Reviews.

[9]  R. Pasha,et al.  Heat transfer enhancement of round pin heat sinks using N-eicosane as PCM: an experimental study , 2018, Heat and Mass Transfer.

[10]  H. Ali,et al.  An experimental study of PCM based finned and un-finned heat sinks for passive cooling of electronics , 2018, Heat and Mass Transfer.

[11]  Man-Hoe Kim,et al.  Effects of variable particle sizes on hydrothermal characteristics of nanofluids in a microchannel , 2018 .

[12]  W. Yan,et al.  An experimental study of enhanced heat sinks for thermal management using n-eicosane as phase change material , 2018 .

[13]  D. Reay,et al.  The melting of salt hydrate phase change material in an irregular metal foam for the application of traction transient cooling , 2018 .

[14]  M. Jabbal,et al.  Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter , 2018 .

[15]  H. Ali,et al.  Experimental passive electronics cooling: Parametric investigation of pin-fin geometries and efficient phase change materials , 2017 .

[16]  Jing Liu,et al.  Experimental and numerical investigation of low melting point metal based PCM heat sink with internal fins , 2017 .

[17]  Ji Cheng,et al.  Numerical simulation of flow and heat transfer in composite PCM on the basis of two different models of open-cell metal foam skeletons , 2017 .

[18]  Sonia Fereres,et al.  Effect of an increased thermal contact resistance in a salt PCM-graphite foam composite TES system , 2017 .

[19]  G. Fang,et al.  Morphological characterization and applications of phase change materials in thermal energy storage: A review , 2017 .

[20]  Ya-Ling He,et al.  Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media , 2017 .

[21]  Peng Zhang,et al.  Experimental and numerical investigation of a tube-in-tank latent thermal energy storage unit using composite PCM , 2017 .

[22]  H. Ali,et al.  Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: Effect of pin thickness and PCM volume fraction , 2017 .

[23]  Xie Shaolei,et al.  A novel medium-temperature form-stable phase change material based on dicarboxylic acid eutectic mixture/expanded graphite composites , 2017 .

[24]  Wenhua Yu,et al.  Development of graphite foam infiltrated with MgCl2 for a latent heat based thermal energy storage (LHTES) system , 2016 .

[25]  Raphaël Couturier,et al.  Experimental study of a phase change thermal energy storage with copper foam , 2016 .

[26]  Chao Xu,et al.  Experimental study on enhancement of thermal energy storage with phase-change material , 2016 .

[27]  Subrata Sengupta,et al.  Effect of porosity of conducting matrix on a phase change energy storage device , 2016 .

[28]  Yafei Zhang,et al.  Shape-stabilized phase change materials based on fatty acid eutectics/expanded graphite composites for thermal storage , 2015 .

[29]  M. J. Hosseini,et al.  A numerical method for PCM-based pin fin heat sinks optimization , 2015 .

[30]  Wenhua Yu,et al.  Analysis of a graphite foam–NaCl latent heat storage system for supercritical CO2 power cycles for concentrated solar power ☆ , 2015 .

[31]  Zhihua Zhou,et al.  Phase change materials for solar thermal energy storage in residential buildings in cold climate , 2015 .

[32]  Li Jia,et al.  Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery , 2015 .

[33]  Wenhua Yu,et al.  Phase change material with graphite foam for applications in high-temperature latent heat storage systems of concentrated solar power plants , 2014 .

[34]  Lixian Sun,et al.  Tetradecanol/expanded graphite composite form-stable phase change material for thermal energy storage , 2014 .

[35]  R. Baby,et al.  Numerical Investigation of PCM Based Heat Sinks with Embedded Metal Foam/Crossed Plate Fins , 2014 .

[36]  Wenhua Yu,et al.  Heat transfer analysis of a latent heat thermal energy storage system using graphite foam for concentrated solar power , 2014 .

[37]  Peng Zhang,et al.  Preparation and thermal characterization of paraffin/metal foam composite phase change material , 2013 .

[38]  Ming Li,et al.  Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage , 2013 .

[39]  L. Chow,et al.  Heat transfer enhancement of PAO in microchannel heat exchanger using nano-encapsulated phase change indium particles , 2013 .

[40]  Dan Song,et al.  Preparation and performances of bulk porous Al foams impregnated with phase-change-materials for thermal storage , 2012 .

[41]  Chakravarthy Balaji,et al.  Experimental investigations on phase change material based finned heat sinks for electronic equipment cooling , 2012 .

[42]  F. L. Tan,et al.  Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fins , 2011 .

[43]  Changying Zhao,et al.  A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals , 2011 .

[44]  P. Zhang,et al.  Thermal property measurement and heat transfer analysis of acetamide and acetamide/expanded graphite composite phase change material for solar heat storage , 2011 .

[45]  Changying Zhao,et al.  Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite , 2011 .

[46]  Zhengguo Zhang,et al.  Study on paraffin/expanded graphite composite phase change thermal energy storage material , 2006 .

[47]  G. Ziskind,et al.  Numerical investigation of a PCM-based heat sink with internal fins , 2005 .

[48]  R. Chein,et al.  Thermoelectric cooler application in electronic cooling , 2004 .

[49]  Ahmet Sarı,et al.  Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties , 2004 .

[50]  Yu. F. Maidanik,et al.  Miniature loop heat pipes for electronics cooling , 2003 .

[51]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[52]  R. Mahajan,et al.  Thermophysical properties of high porosity metal foams , 2002 .

[53]  Nestor V. Queipo,et al.  Genetic algorithms for thermosciences research: application to the optimized cooling of electronic components , 1994 .

[54]  M. Sardarabadi,et al.  Experimental investigation of multiwall carbon nanotube/paraffin based heat sink for electronic device thermal management , 2019, Energy Conversion and Management.

[55]  Oana Giurgiu,et al.  PCM Selection Using AHP Method to Maintain Thermal Comfort of the Vehicle Occupants , 2016 .

[56]  Yulong Ding,et al.  PCMs heat transfer performance enhancement with expanded graphite and its thermal stability , 2015 .

[57]  Dan Zhou,et al.  Heat Transfer Enhancement of Phase Change Materials (PCMs) in Low and High Temperature Thermal Storage by Using Porous Materials , 2010 .

[58]  R. Velraj,et al.  Phase change material-based building architecture for thermal management in residential and commercial establishments , 2008 .

[59]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .