High-speed atomic force microscope lithography using a piezo tube scanner driven by a sinusoidal waveform.

Improving the throughput of atomic force microscope (AFM) lithography is an important success factor for employing it in nanolithography applications. The conventional motion of the AFM tube scanner is usually driven by triangular-shaped signals, but it is limited in speed due to mechanical instability of the scanner at the turning points. Here, we show that high-speed lithography is achievable using not only a piezo tube driven by a sinusoidal waveform signal but also highly sensitive noble organic resists including a photo acid generator. Cross-linked polymer nanostructures applying sinusoidal waveform driving have also shown improvements in the linearity and uniformity of line patterns.

[1]  Eric S. Snow,et al.  Single‐atom point contact devices fabricated with an atomic force microscope , 1996 .

[2]  M. Ancona,et al.  Thin silicon nitride films for reduction of linewidth and proximity effects in e‐beam lithography , 1992 .

[3]  Georg Schitter,et al.  Identification and open-loop tracking control of a piezoelectric tube scanner for high-speed scanning-probe microscopy , 2004, IEEE Transactions on Control Systems Technology.

[4]  Shinji Okazaki,et al.  Resolution limits of optical lithography , 1991 .

[5]  M. Horton,et al.  Breaking the speed limit with atomic force microscopy , 2007 .

[6]  Shinji Okazaki,et al.  Pushing the limits of lithography , 2000, Nature.

[7]  Eun Kyu Kim,et al.  Direct nanometer-scale patterning by the cantilever oscillation of an atomic force microscope , 1999 .

[8]  Calvin F. Quate,et al.  High-speed, large-scale imaging with the atomic force microscope , 1991 .

[9]  A. Latyshev,et al.  The deepness enhancing of an AFM-tip induced surface nanomodification , 2005 .

[10]  Haiwon Lee,et al.  Atomic force microscope anodization lithography using a triarylsulfonium salt photoinitiator , 2008 .

[11]  C. Quate,et al.  Centimeter scale atomic force microscope imaging and lithography , 1998 .

[12]  Jonathan D. Adams,et al.  Components for high speed atomic force microscopy. , 2006, Ultramicroscopy.

[13]  D. Croft,et al.  Creep, Hysteresis, and Vibration Compensation for Piezoactuators: Atomic Force Microscopy Application , 2001 .

[14]  Michael T. Postek,et al.  Modification of hydrogen-passivated silicon by a scanning tunneling microscope operating in air , 1990 .

[15]  D. Croft,et al.  Vibration compensation for high speed scanning tunneling microscopy , 1999 .

[16]  Hiroshi Masuhara,et al.  Tip‐induced anodization of titanium surfaces by scanning tunneling microscopy: A humidity effect on nanolithography , 1993 .

[17]  Haiwon Lee,et al.  Selective growth of nanometre scale structures with high resolution using thermal energy in AFM lithography , 2005 .

[18]  A. Bettiol,et al.  Water‐Bridge‐Assisted Ionic Conduction in Probe‐Induced Conical Polymer Pattern Formation , 2005, Advanced materials.