Compensation for Inverter Nonlinearity in Permanent Magnet Synchronous Motor Drive and Effect on Torsional Vibration of Electric Vehicle Driveline

[1]  Seung-Ki Sul,et al.  Inverter output voltage synthesis using novel dead time compensation , 1996 .

[2]  Hyun-Soo Kim,et al.  Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty , 2006, IEEE Transactions on Control Systems Technology.

[3]  Thomas A. Lipo,et al.  On-line dead-time compensation technique for open-loop PWM-VSI drives , 1999 .

[4]  Ken Ito,et al.  Highly-Responsive Acceleration Control for the Nissan LEAF Electric Vehicle , 2011 .

[5]  Hiroshi Sugita,et al.  Noise and Vibration Reduction Technology in Hybrid Vehicle Development , 2001 .

[6]  Hyun-Soo Kim,et al.  On-line dead-time compensation method based on time delay control , 2003, IEEE Trans. Control. Syst. Technol..

[7]  K. Kamiyama,et al.  Fully digital, vector-controlled PWM VSI-fed AC drives with an inverter dead-time compensation strategy , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[8]  Makoto Abe,et al.  Development of High Response Motor and Inverter System for the Nissan LEAF Electric Vehicle , 2011 .

[9]  Juan Antonio Ortega-Redondo,et al.  Multiple-Fault Detection Methodology Based on Vibration and Current Analysis Applied to Bearings in Induction Motors and Gearboxes on the Kinematic Chain , 2016 .

[10]  Yu Jiang,et al.  Recent progress on decoupling diagnosis of hybrid failures in gear transmission systems using vibration sensor signal: A review , 2016 .

[11]  Hyun-Soo Kim,et al.  On-line dead-time compensation method using disturbance observer , 2003 .

[12]  Tae-Hee Jung,et al.  The Active Damping Control to Reduce Driveline Oscillations for Electric Vehicles Using Wheel Speeds , 2015 .

[13]  Russel J. Kerkman,et al.  Pulse-based dead-time compensator for PWM voltage inverters , 1997, IEEE Trans. Ind. Electron..

[14]  R. C. Dodson,et al.  Compensating for dead time degradation of PWM inverter waveforms , 1990 .

[15]  Adam Glowacz,et al.  Dijagnostika greške akustičkih signala opterećenog sinkronog motora primjenom SMOFS-25-EXPANDED i odabranih klasifikatora , 2016 .

[16]  Takashi Yamaguchi,et al.  A novel suppression method of 6th-order torque ripple of permanent magnet synchronous motor without torque meter , 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

[17]  Hiroyuki Ashizawa,et al.  HEV Application of Shaking Vibration Control System Based on Advanced Motor Control , 2012 .

[18]  Yoshiaki Ito,et al.  Design of the Surge Control Method for the Electric Vehicle Powertrain , 2002 .

[19]  Thomas M. Jahns,et al.  Pulsating torque minimization techniques for permanent magnet AC motor drives-a review , 1996, IEEE Trans. Ind. Electron..

[20]  Paolo Mercorelli,et al.  Parameters identification in a permanent magnet three-phase synchronous motor of a city-bus for an intelligent drive assistant , 2014, Int. J. Model. Identif. Control..

[21]  Seung-Yub Park,et al.  Compensation of Dead-Time Effects Based on Adaptive Harmonic Filtering in the Vector-Controlled AC Motor Drives , 2007, IEEE Transactions on Industrial Electronics.

[22]  Seung-Gi Jeong,et al.  The analysis and compensation of dead-time effects in PWM inverters , 1991 .

[23]  J. Bocker,et al.  Active damping of drive train oscillations for an electrically driven vehicle , 2004, IEEE/ASME Transactions on Mechatronics.

[24]  Seung-Ki Sul,et al.  A new compensation strategy reducing voltage/current distortion in PWM VSI systems operating with low output voltages , 1995 .

[25]  Adam Glowacz,et al.  Recognition of aRmatuRe cuRRent of Dc geneRatoR DepenDing on RotoR speeD using fft, msaf-1 anD LDa Rozpoznawanie sygnałów pR ąDu twoRnika geneR atoRa pRąDu stałego w zaLeżności oD pRęDkości obR otowej wiRnika z zastosowaniem fft, msaf-1 i LDa* , 2015 .

[27]  Kensuke Kamichi,et al.  Development of Vibration Reduction Motor Control for Series-Parallel Hybrid System , 2006 .

[28]  T. Funabashi,et al.  Adaptive Dead-Time Compensation Strategy for Permanent Magnet Synchronous Motor Drive , 2007, IEEE Transactions on Energy Conversion.