Cracked reinforced concrete in compression has been observed to exhibit lower strength and stiffness than uniaxially compressed concrete. The so‐called compression softening effect responsible is thought to be related to the degree of transverse cracking and straining present. It significantly influences the strength, ductility and load‐deformation response of a concrete element. A number of experimental investigations have been undertaken to determine the degree of softening that occurs, and the factors that influence it. At the same time, a number of diverse analytical models have been proposed by various researchers aimed at modeling this behavior. In this paper, a review is made of the experimental data available, of the various models proposed, and of the accuracy of the models in correlating to the test data. Based on new data, previously derived analytical models are updated. Parametric studies are made to investigate factors thought to influence the softening effect. As well, nonlinear finite elem...
[1]
Peter MartiI,et al.
Response of Prestressed Concrete Elements to In-Plane Shear Forces
,
1992
.
[2]
F. Vecchio.
Nonlinear Finite Element Analysis of Reinforced Concrete Membranes
,
1989
.
[3]
Michael P. Collins,et al.
SHEAR AND TORSION DESIGN OF PRESTRESSED AND NON PRESTRESSED CONCRETE BEAMS
,
1980
.
[4]
S. M. Uzumeri,et al.
Constitutive Model for Reinforced Concrete Finite Element Analysis
,
1991
.
[5]
F. J. Vecchio,et al.
Reinforced Concrete Membrane Elements with Perforations
,
1990
.
[6]
Denis Mitchell,et al.
Studies of Disturbed Regions Near Discontinuities in Reinforced Concrete Members
,
1988
.