Improved interfacial strength and ablation resistance of carbon fabric reinforced phenolic composites modified with functionalized ZrSiO4 sol

[1]  Taotao Wu,et al.  Ablation behavior of boron-modified phenolic resin irradiated by high-energy continuous-wave laser and its evolution of carbon structure , 2019, Materials & Design.

[2]  Taotao Wu,et al.  Ablation behavior of inorganic particle-filled polybenzoxazine composite coating irradiated by high-intensity continuous laser , 2019, Ceramics International.

[3]  Q. Fu,et al.  Ablation behavior of nose-shaped HfB2-SiC modified carbon/carbon composites exposed to oxyacetylene torch , 2019, Corrosion Science.

[4]  Jianfeng Huang,et al.  Microstructure and ablation properties of C/C-Zr-Si-O composites prepared by carbothermal reduction of hydrothermal co-deposited oxides , 2018, Materials & Design.

[5]  Tao Yang,et al.  Thermal stability and ablation resistance, and ablation mechanism of carbon–phenolic composites with different zirconium silicide particle loadings , 2018, Composites Part B: Engineering.

[6]  B. Ramezanzadeh,et al.  A comparative study on fabrication of a highly effective corrosion protective system based on graphene oxide-polyaniline nanofibers/epoxy composite , 2018 .

[7]  H. Jiang,et al.  Improving the interfacial strength of silicone resin composites by chemically grafting silica nanoparticles on carbon fiber , 2017 .

[8]  M. Naebe,et al.  Carbon fibre surface modification using functionalized nanoclay: A hierarchical interphase for fibre-reinforced polymer composites , 2017 .

[9]  Yingdan Zhu,et al.  A facile one-pot fabrication of polyphosphazene microsphere/carbon fiber hybrid reinforcement and its effect on the interfacial adhesion of epoxy composites , 2017 .

[10]  Yudong Huang,et al.  Interfacial properties and impact toughness of methylphenylsilicone resin composites by chemically grafting POSS and tetraethylenepentamine onto carbon fibers , 2016 .

[11]  F. Yazdani,et al.  Thermal and mechanical properties of phenolic-based composites reinforced by carbon fibres and multiwall carbon nanotubes , 2015 .

[12]  Shuai Jiang,et al.  Effect of surface silanization of carbon fiber on mechanical properties of carbon fiber reinforced polyurethane composites , 2015 .

[13]  K. Balasubramanian,et al.  Cost-effective, low density, carbon soot doped resorcinol formaldehyde composite for ablative applications , 2015 .

[14]  Weihui Jiang,et al.  Preparation and chromatic properties of C@ZrSiO4 inclusion pigment via non-hydrolytic sol–gel method , 2015 .

[15]  W. Lee,et al.  Effects of carbon nanotubes and carbon fiber reinforcements on thermal conductivity and ablation properties of carbon/phenolic composites , 2014 .

[16]  M. Akbari,et al.  Effect of nanosilica on the microstructure, thermal properties and bending strength of nanosilica modified carbon fiber/phenolic nanocomposite , 2014 .

[17]  Min Ho Lee,et al.  Colloidal Properties of Surface Coated Colloidal Silica Nanoparticles in Aqueous and Physiological Solutions , 2014 .

[18]  L. Miao,et al.  Preparation of C@ZrSiO4 Inclusion Pigment Using Compound Colorants via Non-Hydrolytic Sol-Gel Method , 2014 .

[19]  W. Lee,et al.  Ablative and mechanical evaluation of CNT/phenolic composites by thermal and microstructural analyses , 2014 .

[20]  B. Bae,et al.  Sol-gel derived transparent zirconium-phenyl siloxane hybrid for robust high refractive index LED encapsulant. , 2014, ACS applied materials & interfaces.

[21]  Anilesh Kumar,et al.  Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites , 2013 .

[22]  D. Hui,et al.  Improved ablation resistance of carbon–phenolic composites by introducing zirconium diboride particles , 2013 .

[23]  Z. Zhang,et al.  Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion , 2011 .

[24]  R. Telle,et al.  Thermal stability of zircon (ZrSiO4) , 2008 .

[25]  T. Kang,et al.  A comparison of the interfacial, thermal, and ablative properties between spun and filament yarn type carbon fabric/phenolic composites , 2004 .

[26]  Jack C. Lee,et al.  Ultrathin zirconium silicate film with good thermal stability for alternative gate dielectric application , 2000 .

[27]  Long-Gui Tang,et al.  A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix , 1997 .

[28]  D. Cho.  A microstructural study of the improved ablation resistance of carbon/phenolic composites fabricated using H3PO4-coated carbon fibres , 1996 .

[29]  Shanyi Du,et al.  Oxidation and ablation of 3D carbon-carbon composite at up to 3000 °C , 1995 .