An integrated method for rapid estimation of the valley incision by debris flows

Abstract Valley incision by debris flow is an important process in creating and maintaining the topography of a valley, in addition to explaining the significant growth of the magnitudes of debris flow hazards. In this paper, we introduce a semi-empirical method to quantitatively estimate the valley incision process by debris flows over complex bed surface. We first reproduce natural bed surface across the valley by a polyline, and use a hydrograph of discharge versus time to represent the temporal variation of debris flow process. The presented method subsequently predicts the debris flow behavior over an irregular bed surface. A dynamic erosion law considers the solved debris flow behavior and estimates an instantaneous erosion rate. Finally, the accumulative incision depth of bed sediment is calculated, reshaping the initial bed surface across the valley. The presented method is simple and therefore notably beneficial for practical work. The performance of the proposed method has been tested using two case study applications. Results demonstrate that the presented method estimates comparable incision depth as revealed in the in-situ survey and the numerical simulation.

[1]  Marwan A. Hassan,et al.  Debris flow initiation and sediment recharge in gullies , 2009 .

[2]  Shi Wei,et al.  The Influence of Accumulated Precipitation on Debris Flow Hazard Area , 2014 .

[3]  D. Lin,et al.  Numerical simulations of flow motion and deposition characteristics of granular debris flows , 2009 .

[4]  Richard M. Iverson,et al.  Positive feedback and momentum growth during debris-flow entrainment of wet bed sediment , 2011 .

[5]  S. Peng.  Hazard Ratings of Debris Flow Evacuation Sites in Hillside Communities of Ershui Township, Changhua County, Taiwan , 2016 .

[6]  T. de Haas,et al.  Effects of debris-flow composition and topography on runout distance, depositional mechanisms and deposit morphology. , 2015 .

[7]  Tamotsu Takahashi,et al.  Debris Flow: Mechanics, Prediction and Countermeasures , 2007 .

[8]  Guang-qi Chen,et al.  Estimating the mud depth of debris flow in a natural river channel: a theoretical approach and its engineering application , 2016, Environmental Earth Sciences.

[9]  Giovanni B. Crosta,et al.  Numerical modeling of 2‐D granular step collapse on erodible and nonerodible surface , 2009 .

[10]  Tamotsu Takahashi,et al.  Mechanical Characteristics of Debris Flow , 1978 .

[11]  R. Iverson,et al.  U. S. Geological Survey , 1967, Radiocarbon.

[12]  Zheng Han,et al.  Numerical simulation of debris-flow behavior incorporating a dynamic method for estimating the entrainment , 2015 .

[13]  Kyoji Sassa,et al.  Geotechnical model for the motion of landslides , 1988 .

[14]  S. Pudasaini.  A general two-phase debris flow model , 2012 .

[15]  T. Mizuyama.  Structural Countermeasures for Debris Flow Disasters , 2008 .

[16]  Paul M. Santi,et al.  A study of methods to estimate debris flow velocity , 2008 .

[17]  J. Imran,et al.  1D Numerical Model of Muddy Subaqueous and Subaerial Debris Flows , 2001 .

[18]  Tjalling de Haas,et al.  Effects of debris flow composition on runout, depositional mechanisms, and deposit morphology in laboratory experiments , 2015 .

[19]  Giovanni B. Crosta,et al.  Numerical modelling of entrainment/deposition in rock and debris-avalanches , 2009 .

[20]  K. Whipple.  Predicting debris-flow runout and deposition on fans: the importance of the flow hydrograph , 1992 .

[21]  Alessandro Simoni,et al.  Field observations of a debris flow event in the Dolomites , 1999 .

[22]  Siming He,et al.  Numerical analysis of dynamics of debris flow over erodible beds in Wenchuan earthquake-induced area , 2015 .

[23]  J. Major,et al.  Debris flow against obstacles and bends; dynamics and deposits , 1994 .

[24]  Scott McDougall,et al.  Two numerical models for landslide dynamic analysis , 2009, Comput. Geosci..

[25]  Allen Bateman,et al.  Application of FLATModel, a 2D finite volume code, to debris flows in the northeastern part of the Iberian Peninsula , 2008 .

[26]  William E. Dietrich,et al.  Erosion of steepland valleys by debris flows , 2006 .

[27]  Chuan Tang,et al.  An empirical–statistical model for predicting debris-flow runout zones in the Wenchuan earthquake area , 2012 .

[28]  Marc Christen,et al.  RAMMS: numerical simulation of dense snow avalanches in three-dimensional terrain , 2010 .

[29]  Brian W. McArdell,et al.  Sediment transfer patterns at the Illgraben catchment, Switzerland: Implications for the time scales of debris flow activities , 2011 .

[30]  Lorenzo Marchi,et al.  Sediment transfer processes in two Alpine catchments of contrasting morphological settings , 2009 .

[31]  Z. Q. Yue,et al.  A rational method for estimating maximum discharge of a landslide-induced debris flow: A case study from southwestern China , 2007 .

[32]  Scott McDougall,et al.  Dynamic modelling of entrainment in rapid landslides , 2005 .

[33]  T. Esaki,et al.  GIS-based two-dimensional numerical simulation of rainfall-induced debris flow , 2008 .

[34]  Zheng Han,et al.  Exploring the velocity distribution of debris flows: An iteration algorithm based approach for complex cross-sections , 2015 .

[35]  Guangqi Chen,et al.  Elementary analysis on the bed-sediment entrainment by debris flow and its application using the TopFlowDF model , 2016 .

[36]  G. Crosta.  Failure and flow development of a complex slide: the 1993 Sesa landslide , 2001 .

[37]  G. Tucker,et al.  Dynamics of the stream‐power river incision model: Implications for height limits of mountain ranges, landscape response timescales, and research needs , 1999 .

[38]  Thomas Glade,et al.  Linking debris-flow hazard assessments with geomorphology , 2005 .

[39]  S. Pudasaini,et al.  A mechanical erosion model for two-phase mass flows , 2016, International Journal of Multiphase Flow.

[40]  Zheng Han,et al.  Assessing entrainment of bed material in a debris‐flow event: a theoretical approach incorporating Monte Carlo method , 2015 .

[41]  Pilar García-Navarro,et al.  1D Mathematical modelling of debris flow , 2000 .

[42]  Richard M. Iverson,et al.  Elementary theory of bed‐sediment entrainment by debris flows and avalanches , 2012 .

[43]  Jean-Philippe Malet,et al.  A GIS-based numerical model for simulating the kinematics of mud and debris flows over complex terrain , 2009 .

[44]  Guang-qi Chen,et al.  Numerical simulation for run-out extent of debris flows using an improved cellular automaton model , 2017, Bulletin of Engineering Geology and the Environment.

[45]  Jeffrey A. Coe,et al.  Alpine debris flows triggered by a 28 July 1999 thunderstorm in the central Front Range, Colorado , 2007 .

[46]  Takahisa Mizuyama,et al.  Design Standard of Control Structures Against Debris Flow in Japan , 2010 .

[47]  Oldrich Hungr,et al.  Quantitative analysis of debris torrent hazards for design of remedial measures , 1984 .

[48]  M. Pastor,et al.  Numerical study on the entrainment of bed material into rapid landslides , 2012 .

[49]  Scott McDougall,et al.  Entrainment of material by debris flows , 2005 .

[50]  Dieter Rickenmann,et al.  Empirical Relationships for Debris Flows , 1999 .

[51]  Guang-qi Chen,et al.  A new approach for analyzing the velocity distribution of debris flows at typical cross-sections , 2014, Natural Hazards.

[52]  R. Iverson,et al.  Grain-size segregation and levee formation in geophysical mass flows , 2012 .

[53]  Jim E. O'Connor,et al.  Debris flows from failures Neoglacial-age moraine dams in the Three Sisters and Mount Jefferson wilderness areas, Oregon , 2001 .

[54]  G. Tucker,et al.  Sediment entrainment by debris flows: In situ measurements from the headwaters of a steep catchment , 2012 .

[55]  Guangqi Chen,et al.  3D numerical simulation of debris-flow motion using SPH method incorporating non-Newtonian fluid behavior , 2016, Natural Hazards.

[56]  T. Haas,et al.  Bed scour by debris flows: experimental investigation of effects of debris‐flow composition , 2016 .

[57]  D. Rickenmann,et al.  Debris-flow velocities and superelevation in a curved laboratory channel , 2015 .

[58]  C. J. van Westen,et al.  Analysis of debris flow behavior with a one dimensional run-out model incorporating entrainment , 2012 .

[59]  D. Mcclung,et al.  Superelevation of flowing avalanches around curved channel bends , 2001 .

[60]  Jan-Thomas Fischer,et al.  r.avaflow v1, an advanced open-source computational framework for the propagation and interaction of two-phase mass flows , 2016 .

[61]  Kaare Høeg,et al.  Erosion and morphology of a debris flow caused by a glacial lake outburst flood, Western Norway , 2008 .

[62]  S. Pudasaini,et al.  A mechanical model for phase separation in debris flow , 2016, International Journal of Multiphase Flow.

[63]  D. Laigle,et al.  Comparison of 2D debris-flow simulation models with field events , 2006 .

[64]  Yi-Chin Chen,et al.  Large-scale simulation of watershed mass transport: a case study of Tsengwen reservoir watershed, southwest Taiwan , 2013, Natural Hazards.

[65]  F. Bouchut,et al.  On new erosion models of Savage–Hutter type for avalanches , 2008 .

[66]  A. Skempton.  THE PORE-PRESSURE COEFFICIENTS A AND B , 1954 .

[67]  G. Tucker,et al.  Field measurement of basal forces generated by erosive debris flows , 2013 .

[68]  J. Kirchner,et al.  DebrisInterMixing-2.3: a Finite Volume solver for three dimensional debris flow simulations based on a single calibration parameter - Part 2: Model validation , 2015 .

[69]  Lev S. Tsimring,et al.  Avalanche mobility induced by the presence of an erodible bed and associated entrainment , 2007 .