Computational analysis of noise reduction devices in axial fans with stabilized finite element formulations
暂无分享,去创建一个
[1] Pablo A. Kler,et al. SUPG and discontinuity-capturing methods for coupled fluid mechanics and electrochemical transport problems , 2013 .
[2] Yuri Bazilevs,et al. Fluid–structure interaction modeling of wind turbines: simulating the full machine , 2012, Computational Mechanics.
[3] Yuri Bazilevs,et al. Wind turbine aerodynamics using ALE–VMS: validation and the role of weakly enforced boundary conditions , 2012, Computational Mechanics.
[4] Alessandro Corsini,et al. Computer Modeling of Wave-Energy Air Turbines With the SUPG/PSPG Formulation and Discontinuity-Capturing Technique , 2012 .
[5] Tayfun E. Tezduyar,et al. Space–time SUPG finite element computation of shallow-water flows with moving shorelines , 2011 .
[6] Tayfun E. Tezduyar,et al. Multiscale space–time fluid–structure interaction techniques , 2011 .
[7] T. Tezduyar,et al. Stabilized space–time computation of wind-turbine rotor aerodynamics , 2011 .
[8] Tayfun E. Tezduyar,et al. Comments on ‘Adiabatic shock capturing in perfect gas hypersonic flows’ , 2011 .
[9] Yuri Bazilevs,et al. Numerical-performance studies for the stabilized space–time computation of wind-turbine rotor aerodynamics , 2011 .
[10] Alessandro Corsini,et al. Stabilized finite element computation of NOx emission in aero‐engine combustors , 2011 .
[11] Yuri Bazilevs,et al. 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics , 2011 .
[12] Alessandro Corsini,et al. A DRD finite element formulation for computing turbulent reacting flows in gas turbine combustors , 2010 .
[13] Thomas J. R. Hughes,et al. Stabilized Methods for Compressible Flows , 2010, J. Sci. Comput..
[14] Victor M. Calo,et al. Improving stability of stabilized and multiscale formulations in flow simulations at small time steps , 2010 .
[15] Alessandro Corsini,et al. Experimental Aeroacoustic Studies on Improved Tip Configurations for Passive Control of Noise Signatures in Low-Speed Axial Fans , 2009 .
[16] Alvaro L. G. A. Coutinho,et al. Three-Dimensional Edge-Based SUPG Computation of Inviscid Compressible Flows With YZβ Shock-Capturing , 2009 .
[17] A. G. Sheard,et al. Shaping of Tip End-Plate to Control Leakage Vortex Swirl in Axial Flow Fans , 2010 .
[18] T. Hughes,et al. Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows , 2007 .
[19] Wolfgang A. Wall,et al. A ‘divide‐and‐conquer’ spatial and temporal multiscale method for transient convection–diffusion–reaction equations , 2007 .
[20] Victor M. Calo,et al. YZβ discontinuity capturing for advection‐dominated processes with application to arterial drug delivery , 2007 .
[21] Tayfun E. Tezduyar,et al. Finite elements in fluids: Stabilized formulations and moving boundaries and interfaces , 2007 .
[22] Alessandro Corsini,et al. Development of improved blade tip endplate concepts for low-noise operation in industrial fans , 2007 .
[23] Alessandro Corsini,et al. Finite element computation of turbulent flows with the discontinuity-capturing directional dissipation (DCDD) , 2007 .
[24] Tayfun E. Tezduyar,et al. SUPG finite element computation of inviscid supersonic flows with YZβ shock-Capturing , 2007 .
[25] T. Tezduyar,et al. Improved Discontinuity-capturing Finite Element Techniques for Reaction Effects in Turbulence Computation , 2006 .
[26] Tayfun E. Tezduyar,et al. Computation of Inviscid Supersonic Flows Around Cylinders and Spheres with the SUPG Formulation and YZβ Shock-Capturing , 2006 .
[27] Alessandro Corsini,et al. A variational multiscale higher-order finite element formulation for turbomachinery flow computations , 2005 .
[28] Alvaro L. G. A. Coutinho,et al. Compressible flow SUPG parameters computed from element matrices , 2005 .
[29] A. Corsini,et al. Flow analyses in a high-pressure axial ventilation fan with a non-linear eddy-viscosity closure , 2005 .
[30] スパッジアリ,アレッサンドロ. Axial flow fan , 2005 .
[31] Tayfun E. Tezduyar,et al. Stabilization and shock-capturing parameters in SUPG formulation of compressible flows , 2004 .
[32] L. Formaggia,et al. Anisotropic mesh adaptation in computational fluid dynamics: application to the advection-diffusion-reaction and the Stokes problems , 2004 .
[33] Choon‐Man Jang,et al. Tip clearance noise of axial flow fans operating at design and off-design condition , 2004 .
[34] Tayfun E. Tezduyar,et al. Calculation of the advective limit of the SUPG stabilization parameter for linear and higher-order elements , 2004 .
[35] A. Corsini,et al. A new stabilized finite element method for advection-diffusion-reaction equations using quadratic elements , 2004 .
[36] Claes Johnson,et al. Adaptive DNS/LES : a new agenda in cfd , 2004 .
[37] T. Tezduyar. Computation of moving boundaries and interfaces and stabilization parameters , 2003 .
[38] Masato Furukawa,et al. Effects of the Tip Clearance on Vortical Flow and Its Relation to Noise in an Axial Flow Fan , 2003 .
[39] Guillermo Hauke,et al. A simple subgrid scale stabilized method for the advection–diffusion-reaction equation , 2002 .
[40] Tayfun E. Tezduyar,et al. Finite element stabilization parameters computed from element matrices and vectors , 2000 .
[41] L. Franca,et al. On an Improved Unusual Stabilized Finite Element Method for theAdvective-Reactive-Diffusive Equation , 1999 .
[42] D. A. Quinlan,et al. HIGH FREQUENCY NOISE GENERATION IN SMALL AXIAL FLOW FANS , 1998 .
[43] Chunill Hah,et al. Experimental and Computational Investigation of Stepped Tip Gap Effects on the Flowfield of a Transonic Axial-Flow Compressor Rotor , 1998 .
[44] R. Codina. Comparison of some finite element methods for solving the diffusion-convection-reaction equation , 1998 .
[45] Aspi Rustom Wadia,et al. Inner Workings of Aerodynamic Sweep , 1997 .
[46] B. Launder,et al. Development and application of a cubic eddy-viscosity model of turbulence , 1996 .
[47] T. Hughes. Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods , 1995 .
[48] Tayfun E. Tezduyar,et al. SUPG finite element computation of compressible flows with the entropy and conservation variables formulations , 1993 .
[49] S. Mittal,et al. Incompressible flow computations with stabilized bilinear and linear equal-order-interpolation velocity-pressure elements , 1992 .
[50] Tayfan E. Tezduyar,et al. Stabilized Finite Element Formulations for Incompressible Flow Computations , 1991 .
[51] T. Hughes,et al. Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations , 1990 .
[52] T. Tezduyar,et al. Finite element procedures for time-dependent convection-diffusion-reaction systems , 1987 .
[53] Tayfun E. Tezduyar,et al. Discontinuity-capturing finite element formulations for nonlinear convection-diffusion-reaction equations , 1986 .
[54] Minoru Fukuhara,et al. Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor , 1986 .
[55] Thomas J. R. Hughes,et al. Finite element methods for first-order hyperbolic systems with particular emphasis on the compressible Euler equations , 1984 .
[56] N. A. Cumpsty,et al. Flow Phenomena in Compressor Casing Treatment , 1984 .
[57] S. Leibovich,et al. Wave Propagation, Instability, and Breakdown of Vortices , 1982 .
[58] H. Takata,et al. Stall Margin Improvement by Casing Treatment—Its Mechanism and Effectiveness , 1977 .