Technical textiles for knife and slash resistance

Abstract The knife is the single most commonly used weapon in the UK, accounting for 32% of the weapons employed in violent incidents. Studies reveal that majority of the wounds inflicted by knives are slash-type wounds and can be disfiguring or life-threatening if blood vessels are ruptured. The stab resistant types of armour that are currently available do not protect the arms, neck and face as they are too rigid and heavy to be worn comfortably for everyday use by security personnel and are expensive for the civilian population. This chapter discusses the mechanism of cut and slash resistance and the need to develop a fabric to overcome the specific cut/slash mechanism. It provides an overview of the technical fibres suitable for slash resistance, suitable yarn and fabric manufacturing techniques and relevant test methods to measure resistance against a knife attack. It provides a comprehensive comparison of various composite yarns and knitted fabric structures used in the development of an innovative two-layered knitted structure that is able to withstand a higher impact force during a knife attack, while being lightweight and comfortable to wear continuously for long hours on a day-to-day basis.

[1]  Peter J. Hauser,et al.  Chemical Finishing of Textiles , 2004 .

[2]  Francisco Cristóvão Lourenço de Melo,et al.  Ballistic impact simulation of an armour-piercing projectile on hybrid ceramic/fiber reinforced composite armours , 2012 .

[3]  K. Q. Robert,et al.  Comparison of Filament-Core Spun Yarns Produced by New and Conventional Methods , 1992 .

[4]  J. Shepherd,et al.  Pattern, Severity and Aetiology of Injuries in Victims of Assault , 1990, Journal of the Royal Society of Medicine.

[5]  N. Wagner,et al.  Stab resistance of shear thickening fluid (STF)-treated fabrics , 2007 .

[6]  J. Karger‐Kocsis,et al.  Polyolefin Fiber‐ and Tape‐Reinforced Polymeric Composites , 2012 .

[7]  Martha Molly Adler,et al.  Mechanisms of Transient Moisture Transport Between Fabrics , 1984 .

[8]  Frederick T. Wallenberger,et al.  Fiberglass and glass technology : energy-friendly compositions and applications , 2009 .

[9]  Roger L. Barker,et al.  Comfort Properties of Heat-Resistant Protective Workwear in Varying Conditions of Physical Activity and Environment. Part I: Thermophysical and Sensorial Properties of Fabrics , 2005 .

[10]  O. G. Edholm,et al.  Man and his thermal environment , 1985 .

[11]  P. Gijsman,et al.  Accelerated aging study of ultra high molecular weight polyethylene yarn and unidirectional composites for ballistic applications , 2007, Journal of materials science.

[12]  S. Anand,et al.  Development of a Versatile Antimicrobial Finish for Textile Materials for Healthcare and Hygiene Applications , 2001 .

[13]  P Fenne.  Protection against knives and other weapons , 2005 .

[14]  M. Afshari,et al.  High Performance Fibers Based on Rigid and Flexible Polymers , 2008 .

[15]  G. M. Abbott.  Force-Extension Behavior of Helically Wrapped Elastic Core Yarns , 1984 .

[16]  P. R. Lord,et al.  Handbook of yarn production , 2003 .

[17]  C H Watson,et al.  An assessment of human performance in stabbing. , 1999, Forensic science international.

[18]  A Bleetman,et al.  Wounding patterns and human performance in knife attacks: optimising the protection provided by knife-resistant body armour. , 2003, Journal of clinical forensic medicine.

[19]  Ramasamy Alagirusamy,et al.  Hybrid Yarns and Textile Preforming for Thermoplastic Composites , 2006 .

[20]  K. Toriumi,et al.  Spinning Conditions and Characteristics of Open-End Rotor Hybrid Yarns , 2002 .

[21]  K. Kanchi Govarthanam,et al.  Development of Advanced Personal Protective Equipment Fabrics for Protection Against Slashes and Pathogenic Bacteria Part 2: Development of Antimicrobial Hygiene Garments and their Characterization , 2011 .

[22]  Xiaogang Chen,et al.  Analysis of 3D woven structure as a device for improving thermal comfort of ballistic vests , 2005 .

[23]  K. Kanchi Govarthanam,et al.  Development of an advanced personal protection equipment fabric for protection against slashes , 2012 .

[24]  T. Bogetti,et al.  Ballistic impact into fabric and compliant composite laminates , 2003 .

[25]  Subhash Anand,et al.  Development of Advanced Personal Protective Equipment Fabrics for Protection Against Slashes and Pathogenic Bacteria Part 1: Development and Evaluation of Slash-resistant Garments , 2010 .

[26]  George Havenith,et al.  Heat balance when wearing protective clothing , 1999 .

[27]  A. Gagge,et al.  Physiological and physical factors associated with warm discomfort in sedentary man , 1974 .

[28]  K. Q. Robert,et al.  Comparison of Cotton/Polyester Core and Staple Blend Yarns and Fabrics , 1989 .

[29]  Märtha Sund-Levander,et al.  Normal oral, rectal, tympanic and axillary body temperature in adult men and women: a systematic literature review. , 2002, Scandinavian journal of caring sciences.

[30]  Eric D. Wetzel,et al.  The ballistic impact characteristics of Kevlar® woven fabrics impregnated with a colloidal shear thickening fluid , 2003 .

[31]  Tyrone L. Vigo,et al.  Textile Processing and Properties: Preparation, Dyeing, Finishing and Performance , 1994 .

[32]  Zhaoxu Dong.  Mechanical behavior of silica nanoparticle-impregnated kevlar fabrics , 2010 .

[33]  Anthony Bleetman,et al.  Assailant technique in knife slash attacks. , 2003, Journal of clinical forensic medicine.

[34]  V. Bhatnagar,et al.  38—THE EFFECT OF SPINNING CONDITIONS ON THE TENSILE PROPERTIES OF CORE-SPUN YARNS , 1970 .

[35]  J. V. Dingenen,et al.  High performance dyneema fibres in composites , 1989 .

[36]  A. Nicol,et al.  Biomechanics of knife stab attacks. , 1999, Forensic science international.

[37]  Roger L. Barker,et al.  In Vivo Cutaneous and Perceived Comfort Response to Fabric , 1990 .