Biocomposite nanofibres and osteoblasts for bone tissue engineering

Nanofibres and nanocomposites are highly promising recent additions to materials in relation to tissue engineering. Mimicking the architecture of an extracellular matrix is one of the major challenges for tissue engineering. An operationally simple electrospinning technique was used to fabricate polycaprolactone/nanohydroxyapatite/collagen (PCL/nHA/Col) biocomposite nanofibrous scaffolds to provide mechanical support and to direct the growth of human fetal osteoblasts (hFOB) for tissue engineering of bone. Biocomposite nanofibres constructed with PCL, nHA and collagen type I combinations gave fibre diameters around 189 ± 0.026 to 579 ± 272 nm and pore sizes 2–35 µm. Resulting nanofibrous scaffolds were highly porous (>80%) structures and provided a sufficient open pore structure for cell occupancy whilst allowing free transport of nutrients and metabolic waste products; moreover, vascular in-growth was facilitated. The pore organization was determined by the deposition process, including interconnections of the fibre network. The mineralization was significantly increased (55%) in PCL/nHA/Col biocomposite nanofibrous scaffolds after 10 days of culture and appeared as minerals synthesized by osteoblast cells. The unique nanoscale biocomposite system had inherent surface functionalization for hFOB adhesion, migration, proliferation and mineralization to form a bone tissue for the regeneration of bone defects.

[1]  A Giunti,et al.  Poly-epsilon-caprolactone/hydroxyapatite composites for bone regeneration: in vitro characterization and human osteoblast response. , 2006, Journal of biomedical materials research. Part A.

[2]  Masanori Kikuchi,et al.  Biomimetic synthesis of bone-like nanocomposites using the self-organization mechanism of hydroxyapatite and collagen , 2004 .

[3]  X. D. Zhu,et al.  Three-dimensional nano-HAp/collagen matrix loading with osteogenic cells in organ culture. , 1999, Journal of biomedical materials research.

[4]  Peter X Ma,et al.  Nano-fibrous scaffolding architecture selectively enhances protein adsorption contributing to cell attachment. , 2003, Journal of biomedical materials research. Part A.

[5]  R. Langer,et al.  Wetting of poly(L-lactic acid) and poly(DL-lactic-co-glycolic acid) foams for tissue culture. , 1994, Biomaterials.

[6]  D. Prockop,et al.  An Alizarin red-based assay of mineralization by adherent cells in culture: comparison with cetylpyridinium chloride extraction. , 2004, Analytical biochemistry.

[7]  D. Reneker,et al.  Nanometre diameter fibres of polymer, produced by electrospinning , 1996 .

[8]  Seeram Ramakrishna,et al.  Preparation and characterization of nanofibrous filtering media , 2006 .

[9]  H. Siesler,et al.  Two-dimensional/ATR infrared correlation spectroscopic study on water diffusion in a poly(epsilon-caprolactone) matrix. , 2003, Biomacromolecules.

[10]  J. Vacanti,et al.  A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering. , 2003, Biomaterials.

[11]  D. Mooney,et al.  Engineered bone development from a pre-osteoblast cell line on three-dimensional scaffolds. , 2000, Tissue engineering.

[12]  Amy J Wagoner Johnson,et al.  The mechanical properties and osteoconductivity of hydroxyapatite bone scaffolds with multi-scale porosity. , 2007, Biomaterials.

[13]  A. Veis,et al.  Fourier transform ir spectroscopy of collagen and gelatin solutions: Deconvolution of the amide I band for conformational studies , 1988, Biopolymers.

[14]  Peter Greil,et al.  Functionally graded materials for biomedical applications , 2003 .

[15]  O. Kwon,et al.  A composite of hydroxyapatite with electrospun biodegradable nanofibers as a tissue engineering material. , 2005, Journal of bioscience and bioengineering.

[16]  Richard O C Oreffo,et al.  Bone tissue engineering: hope vs hype. , 2002, Biochemical and biophysical research communications.

[17]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[18]  K. Leong,et al.  Significance of synthetic nanostructures in dictating cellular response. , 2005, Nanomedicine : nanotechnology, biology, and medicine.

[19]  K. P. Rao,et al.  Acclerated microwave processing of nanocrystalline hydroxyapatite , 2005 .

[20]  Youqi Zhu,et al.  Osteoblasts Adherence and Migration through Three-dimensional Porous Mineralized Collagen Based Composite: nHAC/PLA , 2004 .

[21]  M. Gazzano,et al.  Structural and morphological modifications of hydroxyapatite‐polyaspartate composite crystals induced by heat treatment , 2005 .

[22]  Nick A. Guldemond,et al.  Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering. , 2005, Biomaterials.

[23]  M S Chapekar,et al.  Tissue engineering: challenges and opportunities. , 2000, Journal of biomedical materials research.

[24]  Seeram Ramakrishna,et al.  Electrospinning of gelatin fibers and gelatin/PCL composite fibrous scaffolds. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[25]  J. Davies,et al.  Engineering three-dimensional bone tissue in vitro using biodegradable scaffolds: investigating initial cell-seeding density and culture period. , 2000, Journal of biomedical materials research.

[26]  W. Douglas,et al.  Preparation of hydroxyapatite-gelatin nanocomposite. , 2003, Biomaterials.

[27]  F. Cui,et al.  Hierarchically biomimetic bone scaffold materials: nano-HA/collagen/PLA composite. , 2004, Journal of biomedical materials research. Part B, Applied biomaterials.

[28]  Cato T Laurencin,et al.  Electrospun nanofibrous structure: a novel scaffold for tissue engineering. , 2002, Journal of biomedical materials research.