Super-insulated wooden envelopes in Mediterranean climate: Summer overheating, thermal comfort optimization, environmental impact on an Italian case study

Abstract The aim of the study is to verify the actual performance of a super-insulated wooden envelope in a residential building located in a hot dry summer temperate climate and to optimize its thermal behavior favoring a dynamic interaction with the indoor environment. The method involved an integrated strategy between monitoring and calibrated simulations on experimental data and the simultaneous analysis of several aspects such as energy performance ( EnergyPlus software), comfort (dynamic analysis with Fanger’s PMV comfort model) and environmental-economic sustainability (LCA analysis with SimaPro software). Parametric analyses were carried out to generalize the results to various usage patterns of plants and passive cooling techniques and to several climate zones. The study highlighted the presence of overheating phenomena and demonstrated that this problem can be solved or reduced through the adoption of appropriate passive strategies, such as massive inner linings combined with natural or hybrid ventilation. Appropriate values of internal areal heat capacity and decrement factor will configure comfortable and energy efficient solutions. In temperate climates the optimal solution, namely the adoption of a 12 cm thick solid brick (or double dry clay panel) and natural ventilation, reduces the discomfort levels of 30–50%. In hottest periods of extreme climates the best solution, namely CMV +  free-cooling combined with internal lightweight plaster, only slightly reduces the overheating with a 6% reduction of discomfort.

[1]  Bruno Peuportier,et al.  Thermal and environmental assessment of a passive building equipped with an earth-to-air heat exchanger in France , 2008 .

[2]  Li Zhu,et al.  Detailed Energy Saving Performance Analyses on Thermal Mass Walls Demonstrated in a Zero Energy House , 2009 .

[3]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[4]  Andreas H. Hermelink,et al.  CEPHEUS results : measurements and occupants' satisfaction provide evidence for Passive Houses being an option for sustainable building , 2006 .

[5]  David Mwale Ogoli,et al.  Predicting indoor temperatures in closed buildings with high thermal mass , 2003 .

[6]  Wolfgang Feist,et al.  Passive Houses for different climate zones , 2015 .

[7]  Phillip John Jones,et al.  Case study of zero energy house design in UK , 2009 .

[8]  Anna Lewandowska,et al.  Materials composition or energy characteristic – What is more important in environmental life cycle of buildings? , 2014 .

[9]  Eike Musall,et al.  Zero Energy Building A review of definitions and calculation methodologies , 2011 .

[10]  Celina Filippín,et al.  Study of the energy consumption of a massive free-running building in the Argentinean northwest through monitoring and thermal simulation , 2012 .

[11]  B. Givoni,et al.  Thermal monitoring and indoor temperature predictions in a passive solar building in an arid environment , 2008 .

[12]  Tony Roskilly,et al.  This Work Is Licensed under a Creative Commons Attribution 4.0 International License Royapoor M, Roskilly T. Building Model Calibration Using Energy and Environmental Data. Energy and Buildings Building Model Calibration Using Energy and Environmental Data Keywords: Model Calibration Measured Energy , 2022 .

[13]  A. Ferrante,et al.  Zero energy balance and zero on-site CO 2 emission housing development in the Mediterranean climate , 2011 .

[14]  Ignacio Zabalza Bribián,et al.  Life cycle assessment in buildings: State-of-the-art and simplified LCA methodology as a complement for building certification , 2009 .

[15]  Hans-Jörg Althaus,et al.  Relevance of simplifications in LCA of building components , 2009 .

[16]  Gregory A. Keoleian,et al.  Life cycle energy and environmental performance of a new university building: modeling challenges and design implications , 2003 .

[17]  Giovanni Andrea Blengini,et al.  The changing role of life cycle phases, subsystems and materials in the LCA of low energy buildings , 2010 .

[18]  B. V. Venkatarama Reddy,et al.  Embodied energy of common and alternative building materials and technologies , 2003 .

[19]  Francesca Stazi,et al.  Energy, comfort and environmental assessment of different building envelope techniques in a Mediterranean climate with a hot dry summer , 2014 .

[20]  Danny S. Parker,et al.  Very low energy homes in the United States: Perspectives on performance from measured data , 2009 .

[21]  Zerrin Yilmaz,et al.  Evaluation of energy efficient design strategies for different climatic zones: Comparison of thermal performance of buildings in temperate-humid and hot-dry climate , 2007 .

[22]  H. C. Fennell.  Setting Airtightness Standards , 2005 .