Sudden Onset of Pitting Corrosion on Stainless Steel as a Critical Phenomenon

Stainless steels undergo a sharp rise in pitting corrosion rate as the potential, solution concentration, or temperature is changed only slightly. We report experiments using real-time microscopic in situ visualizations that resolve the nucleation and evolution of individual pits during the transition. They suggest that the sudden onset of corrosion is explained by an explosive autocatalytic growth in the number of metastable pits and that stabilization of individual pits takes place only later. This finding agrees with a theoretical approach treating the onset of pitting corrosion as a cooperative critical phenomenon resulting from interactions among metastable pits, and it extends perspectives on the control and prevention of corrosion onset.

[1]  R. Alkire,et al.  Surface Analysis of Corrosion Pits Initiated at MnS Inclusions in 304 Stainless Steel , 1992 .

[2]  D. Siconolfi,et al.  In Situ High‐Resolution Microscopy on Duplex Stainless Steels , 2000 .

[3]  K. Sugimoto,et al.  Microscopic Ellipsometric Observation of the Change in Passive Film on 18Cr‐8Ni Stainless Steel with the Initiation and Growth of Pit , 1985 .

[4]  S. Leigh,et al.  A Statistical Analysis of the Fluctuations of the Passive Current , 1986 .

[5]  David E. Williams,et al.  Stochastic Models of Pitting Corrosion of Stainless Steels I . Modeling of the Initiation and Growth of Pits at Constant Potential , 1985 .

[6]  J. L. Hudson,et al.  Cooperative Stochastic Behavior in Localized Corrosion II. Experiments , 1997 .

[7]  Richard J. Chater,et al.  Why stainless steel corrodes , 2002, Nature.

[8]  M. Ryan,et al.  The Pitting Behavior of Iron‐Chromium Thin Film Alloys in Hydrochloric Acid , 1998 .

[9]  H. Isaacs,et al.  Origins of Electrochemical Noise during Pitting Corrosion of Aluminum , 2004 .

[10]  J. L. Hudson,et al.  Spatial Interactions among Localized Corrosion Sites Experiments and Modeling , 2002 .

[11]  R. Kelly,et al.  Passivity breakdown and pitting corrosion of binary alloys , 1991, Nature.

[12]  John L. Hudson,et al.  Cooperative Stochastic Behavior in Localized Corrosion I. Model , 1997 .

[13]  Petrus Christiaan Pistorius,et al.  Metastable pitting corrosion of stainless steel and the transition to stability , 1992, Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences.

[14]  SeJin Ahn,et al.  The influences of microstructure and nitrogen alloying on pitting corrosion of type 316L and 20 wt.% Mn-substituted type 316L stainless steels , 2001 .

[15]  G. Frankel.  Pitting Corrosion of Metals A Review of the Critical Factors , 1998 .

[16]  Z. Szklarska‐Śmiałowska,et al.  Pitting Corrosion of Metals , 1986 .

[17]  W. Smyrl,et al.  Investigation of the initiation of localized corrosion on aluminum alloys by using fluorescence microscopy , 2000 .

[18]  H. Isaacs,et al.  Current and Potential Transients during Localized Corrosion of Stainless Steel , 1985 .

[19]  K. Heusler,et al.  Statistical investigations of the pitting of passive iron , 1990 .

[20]  H. S. Isaacs,et al.  2000 W.R. Whitney Award Lecture : Visualizing corrosion , 2000 .

[21]  G. Ertl,et al.  Imaging Pattern Formation in Surface Reactions from Ultrahigh Vacuum up to Atmospheric Pressures , 1995, Science.

[22]  J. Castle,et al.  The initiation of pitting corrosion at MnS inclusions , 1993 .