Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys

[1]  Ruifeng Dou,et al.  Rationalizing Al-Mg, Al-Mg-Si, and multicomponent aluminum alloy design with segregation susceptibility predictions , 2020 .

[2]  Jaehwan Kim,et al.  Microstructure characterization of rolled Al-Si-Mg-Fe alloy by three-dimensional tomography , 2019 .

[3]  Houbing Huang,et al.  Optimization of heat treatment process of Al–Mg–Si cast alloys with Zn additions by simulation and experimental investigations , 2019 .

[4]  S. Ji,et al.  Effect of Zr on the high cycle fatigue and mechanical properties of Al–Si–Cu–Mg alloys at elevated temperatures , 2019, Journal of Alloys and Compounds.

[5]  Hyoung-Wook Kim,et al.  Designing the composition and processing route of aluminum alloys using CALPHAD: Case studies , 2019, Calphad.

[6]  İsmail Öztürk,et al.  Effects of strontium addition on the microstructure and corrosion behavior of A356 aluminum alloy , 2018, Journal of Alloys and Compounds.

[7]  M. Rahimian,et al.  Nanoscale Zr-containing precipitates; a solution for significant improvement of high-temperature strength in Al-Si-Cu-Mg alloys , 2018 .

[8]  E. Cerri,et al.  How Slight Solidification Rate Variations within Cast Plate Affect Mechanical Response: A Study on As-Cast A356 Alloy with Cu Additions , 2018 .

[9]  L. Morini,et al.  The role of transition metal additions on the ambient and elevated temperature properties of Al-Si alloys , 2017 .

[10]  Maowen Liu,et al.  Synergistic effects of Gd and Zr on grain refinement and eutectic Si modification of Al-Si cast alloy , 2017 .

[11]  Lijun Zhang,et al.  Thermodynamic description of the quaternary Al-Si-Mg-Sc system and its application to the design of novel Sc-additional A356 alloys , 2017 .

[12]  Baicheng Liu,et al.  Correlation of solidification microstructure refining scale, Mg composition and heat treatment conditions with mechanical properties in Al-7Si-Mg cast aluminum alloys , 2017 .

[13]  E. Ghassemali,et al.  Hall-Petch Equation in a Hypoeutectic Al-Si Cast Alloy : Grain Size vs. Secondary Dendrite Arm Spacing , 2017 .

[14]  E. Cerri,et al.  Effect of copper additions and heat treatment optimization of Al-7 % Si Aluminum Alloy , 2016 .

[15]  Chaoli Ma,et al.  Effects of Cu content and Cu/Mg ratio on the microstructure and mechanical properties of Al–Si–Cu–Mg alloys , 2015 .

[16]  S. K. Shaha,et al.  Thermal stability of (AlSi)x(ZrVTi) intermetallic phases in the Al–Si–Cu–Mg cast alloy with additions of Ti, V, and Zr , 2014 .

[17]  A. Samuel,et al.  The ambient and high temperature deformation behavior of Al–Si–Cu–Mg alloy with minor Ti, Zr, Ni additions , 2014 .

[18]  B. S. Amirkhiz,et al.  Structure and properties of cast Al–Si based alloy with Zr–V–Ti additions and its evaluation of high temperature performance , 2014 .

[19]  A. Samuel,et al.  Effect of grain refiner on the tensile and impact properties of Al–Si–Mg cast alloys , 2014 .

[20]  D. Özyürek,et al.  The effects of Mg amount on the microstructure and mechanical properties of Al–Si–Mg alloys , 2013 .

[21]  M. Easton,et al.  The grain refinement mechanism of cast aluminium by zirconium , 2013 .

[22]  Qianqian Sun,et al.  Morphological evolution of ZrAlSi phase and its impact on the elevated-temperature properties of Al–Si piston alloy , 2013 .

[23]  E. Sjölander,et al.  On the Role of Copper and Cooling Rates on the Microstructure, Defect Formations and Mechanical Properties of Al-Si-Mg Alloys , 2013 .

[24]  P. Palček,et al.  SCANNING ELECTRON MICROSCOPY IDENTIFICATION OF INTERMETALLIC PHASES IN Al-Si CAST ALLOYS , 2013 .

[25]  W. Kasprzak,et al.  Tensile and fatigue properties of a cast aluminum alloy with Ti, Zr and V additions , 2011 .

[26]  E. Karakulak,et al.  Influence of Cu addition on microstructure and hardness of near-eutectic Al-Si-xCu-alloys , 2011 .

[27]  Lorella Ceschini,et al.  Correlation between ultimate tensile strength and solidification microstructure for the sand cast A357 aluminium alloy , 2009 .

[28]  K. G. Basavakumar,et al.  Influence of grain refinement and modification on microstructure and mechanical properties of Al–7Si and Al–7Si–2.5Cu cast alloys , 2008 .

[29]  R. Mahmudi,et al.  Improved properties of A319 aluminum casting alloy modified with Zr , 2006 .

[30]  M. V. van Huis,et al.  Atomic Pillar-Based Nanoprecipitates Strengthen AlMgSi Alloys , 2006, Science.

[31]  J. Voje,et al.  On the effect of additions of Cu and Mg on the ductility of AlSi foundry alloys cast with a cooling rate of approximately 3 K/s , 2005 .

[32]  A. L. Greer,et al.  Thermodynamic modelling of growth-restriction effects in aluminium alloys , 2005 .

[33]  Panthea Sepehrband,et al.  Effect of Zr addition on the aging behavior of A319 aluminum cast alloy , 2005 .

[34]  J. M. Rodriguez-Ibabe,et al.  Evolution of the main intermetallic phases in Al-Si-Cu-Mg casting alloys during solution treatment , 2004 .

[35]  J. Griffiths,et al.  Damage by eutectic particle cracking in aluminum casting alloys A356/357 , 2003 .

[36]  Qigui Wang.  Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357 , 2003 .

[37]  M. Makhlouf,et al.  Effect of key alloying elements on the feeding characteristics of aluminum–silicon casting alloys , 2001 .

[38]  David R Poirier,et al.  Microstructural effects on high-cycle fatigue-crack initiation in A356.2 casting alloy , 1999 .

[39]  D. StJohn,et al.  Grain refinement of aluminum alloys: Part I. the nucleant and solute paradigms—a review of the literature , 1999 .

[40]  M. Johnsson.  Grain refinement of aluminium studied by use of a thermal analytical technique , 1995 .