Experimental Investigations on Latent Heat Storage Unit using Paraffin Wax as Phase Change Material

Thermal performance of a latent heat storage unit is evaluated experimentally. The latent heat thermal energy storage system analyzed in this work is a shell-and-tube type of heat exchanger using paraffin wax (melting point between 58°C and 60°C) as the phase change material. The temperature distribution in the phase change material is measured with time. The influence of mass flow rate and inlet temperature of the heat transfer fluid on heat fraction is examined for both the melting and solidification processes. The mass flow rate of heat transfer fluid (water) is varied in the range of 0.0167 kg/s to 0.0833 kg/s (1 kg/min to 5 kg/min), and the fluid inlet temperature is varied between 75°C and 85°C. The experimental results indicate that the total melting time of the phase change material increases as the mass flow rate and inlet temperature of heat transfer fluid decrease. The fluid inlet temperature influences the heat fraction considerably as compared to the mass flow rate of heat transfer fluid during the melting process of the phase change material.

[1]  S. H. Choi,et al.  Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes , 2000 .

[2]  S. D. Kim,et al.  Heat transfer in a latent heat-storage system , 1989 .

[3]  S. M. Hasnain Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .

[4]  K. Choi,et al.  EXPERIMENTAL STUDIES OF MELTING PHENOMENA FROM A CONSTANT HEAT FLUX VERTICAL PLATE , 1990 .

[5]  K. Kaygusuz,et al.  Thermal Energy Storage Behavior of CaCl2.6H2O during Melting and Solidification , 2008 .

[6]  Mervyn Smyth,et al.  A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins , 2009 .

[7]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[8]  A. Sari,et al.  Thermal performance of palmitic acid as a phase change energy storage material , 2002 .

[9]  K. Kaygusuz,et al.  Experimental study on melting/solidification characteristics of a paraffin as PCM , 2007 .

[10]  K. Ismail,et al.  Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .

[11]  D. Buddhi,et al.  Accelerated thermal cycle test of latent heat-storage materials , 1999 .

[12]  A. Sari,et al.  Thermal energy storage system using stearic acid as a phase change material , 2001 .

[13]  R. Viskanta,et al.  AN EXPERIMENTAL STUDY OF SIMULTANEOUS MELTING AND SOLIDIFICATION AROUND TWO HORIZONTAL, VERTICALLY SPACED CYLINDERS , 1987 .

[14]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .

[15]  Bernard Franković,et al.  Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unit , 2006 .

[16]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[17]  A. Sari,et al.  Thermal Performance of a Eutectic Mixture of Lauric and Stearic Acids as PCM Encapsulated in the Annulus of Two Concentric Pipes , 2002 .

[18]  Aytunç Erek,et al.  Experimental and numerical investigation of thermal energy storage with a finned tube , 2005 .

[19]  M. Demirbas Thermal Energy Storage and Phase Change Materials: An Overview , 2006 .

[20]  Aytunç Erek,et al.  Experimental study on charging and discharging periods of water in a latent heat storage unit , 2011 .

[21]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[22]  K. Sagara,et al.  Latent Heat Storage Materials and Systems: A Review , 2005 .

[23]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[24]  Kamil Kaygusuz,et al.  Thermal Energy Storage System Using a Technical Grade Paraffin Wax as Latent Heat Energy Storage Material , 2005 .