Orthogonal processing: A new strategy for organic electronics

The concept of chemical orthogonality has long been practiced in the field of inorganic semiconductor fabrication, where it is necessary to deposit and remove a layer of photoresist without damaging the underlying layers. However, these processes involving light sensitive polymers often damage organic materials, preventing the use of photolithography to pattern organic electronic devices. In this article we show that new photoresist materials that are orthogonal to organics allow the fabrication of complex devices, such as hybrid organic/inorganic circuitry and full-colour organic displays. The examples demonstrate that properly designed photoresists enable the fabrication of organic electronic devices using existing infrastructure.

[1]  A. Song,et al.  Non-destructive patterning of conducting-polymer devices using subtractive photolithography , 2006 .

[2]  George G. Malliaras,et al.  An Organic Electronics Primer , 2005 .

[3]  H. Katz,et al.  Field-effect-tuned lateral organic diodes , 2010, Proceedings of the National Academy of Sciences.

[4]  Stephen R. Forrest,et al.  Direct, Mask‐ and Solvent‐Free Printing of Molecular Organic Semiconductors , 2004 .

[5]  Junbiao Peng,et al.  Novel red-emitting fluorene-based copolymers , 2002 .

[6]  Klaus Meerholz,et al.  Multi-colour organic light-emitting displays by solution processing , 2003, Nature.

[7]  C. Dimitrakopoulos,et al.  Organic Thin Film Transistors for Large Area Electronics , 2002 .

[8]  Ute Zschieschang,et al.  Low-voltage organic thin-film transistors with large transconductance , 2007 .

[9]  Peifang Tian,et al.  Photolithographic patterning of vacuum-deposited organic light emitting devices , 1997 .

[10]  George M. Whitesides,et al.  Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ‘‘ink’’ followed by chemical etching , 1993 .

[11]  David B. Janes,et al.  Gold surface with sub-nm roughness realized by evaporation on a molecular adhesion monolayer , 2006 .

[12]  George G. Malliaras,et al.  Hydrofluoroethers as Orthogonal Solvents for the Chemical Processing of Organic Electronic Materials , 2008 .

[13]  John A. DeFranco,et al.  Acid-sensitive semiperfluoroalkyl resorcinarene: an imaging material for organic electronics. , 2008, Journal of the American Chemical Society.

[14]  John A Rogers,et al.  Micro- and nanopatterning techniques for organic electronic and optoelectronic systems. , 2007, Chemical reviews.

[15]  Stephen R. Forrest,et al.  The path to ubiquitous and low-cost organic electronic appliances on plastic , 2004, Nature.

[16]  Zhenan Bao,et al.  High-performance plastic transistors fabricated by printing techniques , 1997 .

[17]  Sampath Purushothaman,et al.  Patterning pentacene organic thin film transistors , 2002 .

[18]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[19]  C. Dimitrakopoulos,et al.  Photosensitive Pentacene Precursor: Synthesis, Photothermal Patterning, and Application in Thin‐Film Transistors , 2003 .

[20]  J. C. de Mello,et al.  Patterning of organic devices by interlayer lithography , 2007 .