Calcareous scales deposited in the organic coating defects during artificial seawater cathodic protection: Effect of zinc cations

[1]  B. Ramezanzadeh,et al.  Corrosion inhibition performance of novel eco-friendly nanoreservoirs as bi-component active system on mild steel in aqueous chloride solution , 2019, Journal of the Taiwan Institute of Chemical Engineers.

[2]  Y. F. Cheng,et al.  The influence of cathodic protection potential on the biofilm formation and corrosion behaviour of an X70 steel pipeline in sulfate reducing bacteria media , 2017 .

[3]  B. Ramezanzadeh,et al.  Active corrosion protection of mild steel by an epoxy ester coating reinforced with hybrid organic/inorganic green inhibitive pigment , 2017 .

[4]  M. Rahsepar,et al.  A mechanistic study of the enhanced cathodic protection performance of graphene-reinforced zinc rich nanocomposite coating for corrosion protection of carbon steel substrate , 2017 .

[5]  K. Darowicki,et al.  Time evolution of Electrochemical Impedance spectra of cathodically protected steel in artificial seawater , 2017 .

[6]  T. Shahrabi,et al.  Influence of ionic species on scaling and corrosion performance of AISI 316L rotating disk electrodes in artificial seawater. , 2017 .

[7]  M. Jeannin,et al.  Calcareous electrochemical precipitation, a new method to trap nickel in seawater , 2017, Environmental Chemistry Letters.

[8]  H. Perrot,et al.  Thermodynamic study of Zn2 + inhibition properties and mechanism on calcium carbonate precipitation by chemical and electrochemical methods , 2016 .

[9]  Yong Li,et al.  Mechanically durable, superhydrophobic coatings prepared by dual-layer method for anti-corrosion and self-cleaning , 2016 .

[10]  S. Olsen,et al.  Use of Coatings in Combination with Cathodic Protection – Evaluation of Coating Degradation on Offshore Installations after 20+ Years , 2015 .

[11]  J. Scantlebury,et al.  The effects of zinc ions on the performance of epoxy coated mild steel under cathodic protection (CP) , 2013 .

[12]  E. Han,et al.  The mechanism of inhibition by zinc phosphate in an epoxy coating , 2013 .

[13]  M. Jeannin,et al.  Electrochemical scaling of stainless steel in artificial seawater: Role of experimental conditions on CaCO3 and Mg(OH)2 formation , 2013 .

[14]  T. H. Yun,et al.  The improvement of anticorrosion properties of zinc-rich organic coating by incorporating surface-modified zinc particle , 2012 .

[15]  N. Koga,et al.  Monohydrocalcite in Comparison with Hydrated Amorphous Calcium Carbonate: Precipitation Condition and Thermal Behavior , 2011 .

[16]  R. Naderi,et al.  Cathodic disbondment of epoxy coating with zinc aluminum polyphosphate as a modified zinc phosphate anticorrosion pigment , 2010 .

[17]  B. Hinderliter,et al.  SVET method for characterizing anti-corrosion performance of metal-rich coatings , 2010 .

[18]  F. Baraud,et al.  Calcareous deposit formed under cathodic protection in the presence of natural marine sediments: A 12 month experiment , 2010 .

[19]  K. Zeppenfeld.  Prevention of CaCO3 scale formation by trace amounts of copper (II) in comparison to zinc (II) , 2010 .

[20]  L. V. Žulj,et al.  Disbonding of underwater-cured epoxy coating caused by cathodic protection current , 2009 .

[21]  Tao Zhang,et al.  The role of a zinc phosphate pigment in the corrosion of scratched epoxy-coated steel , 2009 .

[22]  M. Euvrard,et al.  Assessing the effect of zinc on the crystallization of calcium carbonate , 2008 .

[23]  H. Möller.  The influence of Mg2+on the formation of calcareous deposits on a freely corroding low carbon steel in seawater , 2007 .

[24]  M. Harun,et al.  The effect of surface modification on the cathodic disbondment rate of epoxy and alkyd coatings , 2005 .

[25]  B. Tribollet,et al.  Characterization of calcareous deposits in artificial seawater by impedance techniques: 3—Deposit of CaCO3 in the presence of Mg(II) , 2003 .

[26]  A. Gutjahr,et al.  Studies of the growth and dissolution kinetics of the CaCO3 polymorphs calcite and aragonite. II: The influence of divalent cation additives on the growth and dissolution rates , 1996 .

[27]  Y. Kitano,et al.  Adsorption of zinc and copper ions on calcite and aragonite and its influence on the transformation of aragonite to calcite , 1976 .

[28]  B. Ramezanzadeh,et al.  The Synergistic Effect of BTA-Co System on the Corrosion Inhibition of Mild Steel in 3.5 wt% NaCl Solution , 2018 .

[29]  S. Lyon,et al.  Investigation using localised SVET into protection at defects in epoxy coated mild steel under intermittent cathodic protection simulating inter-tidal and splash zones , 2017 .

[30]  S. Lyon,et al.  A bulk and localised electrochemical assessment of epoxy-phenolic coating degradation , 2017 .

[31]  H. Bi,et al.  Cathodic delamination of unpigmented and pigmented epoxy coatings from mild steel , 2016 .

[32]  B. Ramezanzadeh,et al.  The Role of Porosity and Surface Morphology of Calcium Carbonate Deposits on the Corrosion Behavior of Unprotected API 5L X52 Rotating Disk Electrodes in Artificial Seawater , 2016 .

[33]  A. Kalendová,et al.  Anticorrosion efficiency of zinc-filled epoxy coatings containing conducting polymers and pigments , 2015 .

[34]  J. Scantlebury,et al.  Protective properties of intact unpigmented epoxy coated mild steel under cathodic protection , 2012 .

[35]  R. Cottis,et al.  The Influence Of Cathodically Generated Surface Films On Corrosion And The Currently Accepted Criteria For Cathodic Protection , 2009 .

[36]  Kim Rae Gyeong,et al.  Electrochemical characterization of epoxy coated steel under cathodic protection , 2007 .

[37]  Sang-Beom Shin,et al.  Corrosion Protection of Marine Structures by Optimized Combination of Cathodic Polarization and Inorganic Zn Coatings , 2002 .