On-chip 8GHz Non-Periodic High-Swing Noise Detector

In this paper we present an overview of an on-chip noise detection circuit. Mainly, this work is different form the previous works concerning on-chip noise measurement in one or more of the following: First: it does not assume specific noise properties such as periodicity. Second: the requested bandwidth of the output channel can be adjusted freely, therefore, the user can avoid the effect of on-chip parasites and the need to off-chip sophisticated monitoring tools. Third: the detector is equipped with an on-chip voltage divider, which enables measuring the high and low swing fluctuations accurately. Therefore, the detector is suitable to measure the non-periodic /single event noise for the purpose of reliability evaluation and performance modeling. A slower version of the detector is implemented in a test chip using Hitachi 0.18mum technology

[1]  Makoto Ikeda,et al.  Noise effects on performance of low power design schemes in deep submicron regime [CMOS digital ICs] , 2004, 19th IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems, 2004. DFT 2004. Proceedings..

[2]  M. Takamiya,et al.  An on-chip 100 GHz-sampling rate 8-channel sampling oscilloscope with embedded sampling clock generator , 2002, 2002 IEEE International Solid-State Circuits Conference. Digest of Technical Papers (Cat. No.02CH37315).

[3]  Sani R. Nassif,et al.  Fast power grid simulation , 2000, Proceedings 37th Design Automation Conference.

[4]  Yu Zheng,et al.  On-chip oscilloscopes for noninvasive time-domain measurement of waveforms , 2001, Proceedings 2001 IEEE International Conference on Computer Design: VLSI in Computers and Processors. ICCD 2001.

[5]  T. Rahal-Arabi,et al.  On-die droop detector for analog sensing of power supply noise , 2003, 2003 Symposium on VLSI Circuits. Digest of Technical Papers (IEEE Cat. No.03CH37408).

[6]  Kunihiro Asada,et al.  On-chip Detector for Non-Periodic High-Swing Noise Detection , 2005 .

[7]  M. Horowitz,et al.  Circuits and techniques for high-resolution measurement of on-chip power supply noise , 2004, IEEE Journal of Solid-State Circuits.

[8]  Ron Ho,et al.  Applications of on-chip samplers for test and measurement of integrated circuits , 1998, 1998 Symposium on VLSI Circuits. Digest of Technical Papers (Cat. No.98CH36215).

[9]  M. Nagata,et al.  A built-in technique for probing power supply and ground noise distribution within large-scale digital integrated circuits , 2005, IEEE Journal of Solid-State Circuits.