Detecting the fracture process zone in concrete using scanning electron microscopy and numerical modelling using the nonlocal isotropic damage model

This paper deals with two aspects of the characterization of the fracture process zone (FPZ) in quasi-brittle materials such as concrete. An overview is given of the possibility of using a destructive technique, such as the scanning electron microscope, and a numerical model, such as the nonlocal isotropic damage model (NLIDM), to detect FPZ characteristics, e.g., length and width of the FPZ. The fracture of concrete requires the consideration of progressive damage, which is usually modelled by a constitutive law and can be studied by a numerical method. The object-oriented finite element method (OOFEM) has recently been used in damage studies, and thus the FPZ is calculated on the basis of one of the damage models (the NLIDM). The results obtained from the experimental investigation are similar to those obtained using the NLIDM, which has proven to be a useful tool for analysis of the cracking process.

[1]  K. Nemati.  Fracture Analysis of Concrete Using Scanning Electron Microscopy , 2006 .

[2]  Milan Jirásek,et al.  Nonlocal integral formulations of plasticity and damage : Survey of progress , 2002 .

[3]  A. Pollock.  Acoustic emission - 2: Acoustic emission amplitudes , 1973 .

[4]  Z. Bažant,et al.  Nonlocal Continuum Damage, Localization Instability and Convergence , 1988 .

[5]  Jacky Mazars,et al.  'Crush-crack' : a non-local damage model for concrete , 1996 .

[6]  Surendra P. Shah,et al.  Fracture mechanisms of quasi-brittle materials based on acoustic emission , 1990 .

[7]  J. E. Bailey,et al.  Fracture measurements on cement paste , 1976 .

[8]  J. Bhargava,et al.  HIGH-SPEED PHOTOGRAPHY FOR FRACTURE STUDIES OF CONCRETE , 1975 .

[9]  Surendra P. Shah,et al.  Fracture mechanics of concrete , 1995 .

[10]  P. Rossi.  FISSURATION DU BETON : DU MATERIAU A LA STRUCTURE - APPLICATION DE LA MECANIQUE LINEAIRE DE LA RUPTURE , 1986 .

[11]  F. Kharchi,et al.  Concerning the Measurement of the Fracture Energy of a Micro-Concrete According to the Crack Growth in a Three Points Bending Test on Notched Beams , 1989 .

[12]  Surendra P. Shah,et al.  DAMAGE ASSESSMENT IN CONCRETE USING QUANTITATIVE ACOUSTIC EMISSION , 1991 .

[13]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[14]  P. Stutzman,et al.  Cement clinker characterization by scanning electron microscopy , 1991 .

[15]  S. Diamond,et al.  A preliminary SEM study of crack propagation in mortar , 1980 .

[16]  S. Diamond,et al.  A device for direct observation of cracking of cement paste or mortar under compressive loading within a scanning electron microscope , 1982 .

[17]  S. Shah,et al.  Process zone and acoustic-emission measurements in concrete , 1988 .

[18]  M. Jirásek,et al.  ADAPTIVE TECHNIQUE FOR NONLOCAL MODELS , 2000 .

[19]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[20]  S. Marusin.  Sample preparation — the key to SEM studies of failed concrete , 1995 .

[21]  D. Barker,et al.  Fracture Process Zone of Concrete Cracks , 1984 .

[22]  Claudia Comi,et al.  A non-local model with tension and compression damage mechanisms , 2001 .

[23]  M. Ohtsu,et al.  Crack evaluation in concrete members based on ultrasonic spectroscopy , 1995 .

[24]  N. Krstulovic-Opara.  Fracture Process Zone Presence and Behavior in Mortar Specimens , 1993 .

[25]  F. Wittmann,et al.  Experimental Method to Determine Extension of Fracture-Process Zone , 1990 .

[26]  Glaucio H. Paulino,et al.  Evolutionary characteristic length method for smeared cracking finite element models , 1997 .

[27]  B. Mayfield,et al.  Detecting the progress of internal cracks in concrete by using embedded graphite rods , 1981 .