Formation of Ch2o and Uhc Emissions During Catalyst-Heating Operation in Compression Ignition Engines: High-Speed Fid and Mid-Ir Extinction Diagnostics

[1]  R. Reitz,et al.  Effects of a CFD-improved dimple stepped-lip piston on thermal efficiency and emissions in a medium-duty diesel engine , 2022, International Journal of Engine Research.

[2]  R. Reitz,et al.  Numerical and Experimental Studies of a Novel Dimpled Stepped-Lip Piston Design on Turbulent Flow Development in a Medium-Duty Diesel Engine , 2022, SAE Technical Paper Series.

[3]  Seokwon Cho,et al.  Effect of Fuel Cetane Number on the Performance of Catalyst-Heating Operation in a Medium-duty Diesel Engine , 2022, SAE Technical Paper Series.

[4]  Seokwon Cho,et al.  Effect of injection parameters on combustion and emission characteristics under catalyst heating operation in a direct-injection spark-ignition engine , 2022, Energy Conversion and Management.

[5]  Seokwon Cho,et al.  Catalyst-Heating Operation in a Medium-Duty Diesel Engine: Operating Strategy Calibration, Fuel Reactivity, and Fuel Oxygen Effects , 2021, SAE Technical Paper Series.

[6]  H. Im,et al.  Effects of fuel trapping in piston crevice on unburned hydrocarbon emissions in early-injection compression ignition engines , 2021 .

[7]  L. Pickett,et al.  Simultaneous High-Speed Formaldehyde PLIF and Schlieren Imaging of Multiple Injections From an ECN Spray D Injector , 2020, ASME 2020 Internal Combustion Engine Division Fall Technical Conference.

[8]  L. Pickett,et al.  Detailed measurements of transient two-stage ignition and combustion processes in high-pressure spray flames using simultaneous high-speed formaldehyde PLIF and schlieren imaging , 2020 .

[9]  R. Hanson,et al.  Sensitive and interference-immune formaldehyde diagnostic for high-temperature reacting gases using two-color laser absorption near 5.6 µm , 2020 .

[10]  Satoshi Sakaida,et al.  Quantitative measurements of formaldehyde in the low-temperature oxidation of iso-octane using mid-infrared absorption spectroscopy , 2019, Applied Physics B.

[11]  C. Myung,et al.  Comparative study on low ambient temperature regulated/unregulated emissions characteristics of idling light-duty diesel vehicles at cold start and hot restart , 2018, Fuel.

[12]  E. Kurtz,et al.  The Influence of Fuel Cetane Number on Catalyst Light-Off Operation in a Modern Diesel Engine , 2017 .

[13]  C. Bae,et al.  Improvement of diesel combustion with multiple injections at cold condition in a constant volume combustion chamber , 2017 .

[14]  Seungju Yoon,et al.  Achieving Ultra Low NOX Emissions Levels with a 2017 Heavy-Duty On-Highway TC Diesel Engine - Comparison of Advanced Technology Approaches , 2017 .

[15]  Kazuo Takahashi,et al.  Time-Resolved Broadband Cavity-Enhanced Absorption Spectroscopy behind Shock Waves. , 2016, The journal of physical chemistry. A.

[16]  P. Dagaut,et al.  Quantification of HO2 and other products of dimethyl ether oxidation (H2O2, H2O, and CH2O) in a jet-stirred reactor at elevated temperatures by low-pressure sampling and continuous-wave cavity ring-down spectroscopy , 2015 .

[17]  Julien Manin,et al.  Simultaneous formaldehyde PLIF and high-speed schlieren imaging for ignition visualization in high-pressure spray flames , 2015 .

[18]  Richard Baldauf,et al.  Cold temperature and biodiesel fuel effects on speciated emissions of volatile organic compounds from diesel trucks. , 2014, Environmental science & technology.

[19]  Giorgio Martini,et al.  Low-temperature cold-start gaseous emissions of late technology passenger cars , 2013 .

[20]  Ronald K. Hanson,et al.  High-temperature laser absorption diagnostics for CH2O and CH3CHO and their application to shock tube kinetic studies , 2013 .

[21]  Simsoo Park,et al.  Strategies for Particle Emissions Reduction from GDI Engines , 2013 .

[22]  G. Karavalakis,et al.  Impact of diesel fuels on the emissions of non-regulated pollutants , 2012 .

[23]  E. Tomita,et al.  UV–visible light absorption by hydroxyl and formaldehyde and knocking combustion in a DME-HCCI engine , 2012 .

[24]  Gemma A. Brady,et al.  Real World Cold Start Emissions from a Diesel Vehicle , 2012 .

[25]  Brien Lloyd Fulton,et al.  The New Ford 6.7L V-8 Turbocharged Diesel Engine , 2010 .

[26]  Lmt Bart Somers,et al.  Time- and space-resolved quantitative LIF measurements of formaldehyde in a heavy-duty diesel engine , 2010 .

[27]  B. Thirouard,et al.  Investigating Unburned Hydrocarbon (UHC) Emissions in a GDI Engine (Homogeneous and Stratified Modes) Using Formaldehyde LIF and Fast-FID Measurements in the Exhaust Port , 2007 .

[28]  M. Musculus,et al.  In-cylinder unburned hydrocarbon visualization during low-temperature compression-ignition engine combustion using formaldehyde PLIF , 2007 .

[29]  Axel Munack,et al.  GASEOUS COMPOUNDS, OZONE PRECURSORS, PARTICLE NUMBER AND PARTICLE SIZE DISTRIBUTIONS, AND MUTAGENIC EFFECTS DUE TO BIODIESEL , 1999 .

[30]  D. Diat-Sanchez,et al.  The role of diesel exhaust particles and their associated polyaromatic hydrocarbons in the induction of allergic airway disease , 1997 .

[31]  Yasushi Tanaka,et al.  Benefits of New Fuel Injection System Technology on Cold Startability of Diesel Engines - Improvement of Cold Startability and White Smoke Reduction by Means of Multi Injection with Common Rail Fuel System (ECD-U2) , 1994 .

[32]  Nelson P. Bryner,et al.  Comparison of a fractal smoke optics model with light extinction measurements , 1994 .

[33]  R. Luther,et al.  Über die Beziehungen zwischen den Absorptionsspektren und der Konstitution der komplexen Kobaltamminsalze , 1913 .