Numerical Investigation of Subsonic Axial-Flow Tandem Airfoils for a Core Compressor Rotor

..........................................................................................................................ii Acknowledgments .........................................................................................................iii Table of

[1]  Nicholas A. Cumpsty,et al.  Simulating the multistage environment for single-stage compressor experiments , 1996 .

[2]  Arthur J. Wennerstrom,et al.  The Design of an Axial Compressor Stage for a Total Pressure Ratio of 3 to 1 , 1971 .

[3]  H. Hoheisel,et al.  The Combined Effect of Axial Velocity Density Ratio and Aspect Ratio on Compressor Cascade Performance , 1980 .

[4]  Wu Guochuan,et al.  Experimental Investigation of Tandem Blade Cascades with Double-Circular ARC Profiles , 1985 .

[5]  Robert O. Bullock,et al.  Aerodynamic design of axial-flow compressors , 1965 .

[6]  T. Katsanis,et al.  FORTRAN program for calculating velocities and streamlines on a blade-to-blade stream surface of a tandem blade turbomachine , 1969 .

[7]  Kenneth S. Breuer,et al.  Control of tip clearance flows in axial compressors , 2000 .

[8]  Masahiro Inoue,et al.  The role of tip leakage vortex breakdown in compressor rotor aerodynamics , 1998 .

[9]  A. A. Mikolajczak,et al.  Flow through cascades of slotted compressor blades , 1970 .

[10]  Theodore H. Okiishi,et al.  Effects of Shrouded Stator Cavity Flows on Multistage Axial Compressor Aerodynamic Performance , 1996 .

[11]  K. Bammert,et al.  Optimization for Rotor Blades of Tandem Design for Axial Flow Compressors , 1980 .

[12]  John D. Denton,et al.  The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines , 1993 .

[13]  J. A. Brent,et al.  Single-stage experimental evaluation of tandem-airfoil rotor and stator blading for compressors, part 8 , 1974 .

[14]  Jerry R. Wood,et al.  Performance of a tandem-rotor/tandem-stator conical-flow compressor designed for a pressure ratio of 3 , 1982 .

[15]  Lichuan Gui,et al.  Influences of Splitter Blades on the Centrifugal Fan Performances , 1989 .

[16]  R. Peacock.  A review of turbomachinery tip gap effects , 1982 .

[17]  J. Denton.  Loss Mechanisms in Turbomachines , 1993 .

[18]  D. C. Wisler,et al.  Secondary Flow, Turbulent Diffusion, and Mixing in Axial-Flow Compressors , 1987 .

[19]  Anton Weber,et al.  Design, Optimization, and Analysis of a High-Turning Transonic Tandem Compressor Cascade , 1997 .

[20]  H. Starken,et al.  Investigation of the Axial Velocity Density Ratio in a High Turning Cascade , 1975 .

[21]  P R Dodge.  Transonic Two-Dimensional Flow Analysis of Compressor Cascade with Splitter Vanes , 1975 .

[22]  P. C. Ivey,et al.  An Experimental Examination of Cantilevered and Shrouded Stators in a Multistage Axial Compressor , 1998 .

[23]  Edward J. Hall,et al.  ADPAC v1.0: User's Manual , 1999 .

[24]  Georgiy Polupan,et al.  A New Statistical-Based Correlation for the Compressor Tandem Cascade Parameters Effects on the Loss Coefficient , 2007 .

[25]  D. Pollard,et al.  Some Experiments at Low Speed on Compressor Cascades , 1967 .

[26]  P. Pal.  Untersuchungen über den Interferenzeinfluß bei Strömungen durch Tandem-Schaufelgitter , 1965 .

[27]  Robert D. DeRose,et al.  Test of a Supersonic Axial Compressor Stage Incorporating Splitter Vanes in the Rotor , 1975 .

[28]  B. Hoffmann,et al.  Investigations on a Radial Compressor Tandem-Rotor Stage With Adjustable Geometry , 1992 .

[29]  P. C. Tramm,et al.  Design report - Single-stage evaluation of highly-loaded high-Mach-number compressor stages , 1969 .

[30]  Warner L Stewart,et al.  Analysis of two-dimensional compressible-flow loss characteristics downstream of turbomachine blade rows in terms of basic boundary-layer characteristics , 1955 .

[31]  Steven R. Wellborn,et al.  Numerical Investigation of Tandem Airfoils for Subsonic Axial-Flow Compressor Blades , 2009 .

[32]  Douglas A. Roberts,et al.  Numerical Investigation of Tandem-Impeller Designs for a Gas Turbine Compressor , 2002 .

[33]  Hideo Ohtani,et al.  Approach to High Performance Transonic Centrifugal Compressor , 2002 .

[34]  Paul C. Ivey,et al.  Endwall Effects at Two Tip Clearances in a Multistage Axial Flow Compressor With Controlled Diffusion Blading , 1994 .

[35]  B. Lakshminarayana.  Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachinery , 1970 .

[36]  N. L. Sanger.  Analytical study of the effects of geometric changes on the flow characteristics of tandem- bladed compressor stators , 1971 .

[37]  Nicholas A. Cumpsty,et al.  Averaging Nonuniform Flow for a Purpose , 2006 .

[38]  Numerical Investigation of the Flow in Tandem Compressor Cascades , 2004 .

[39]  K. Bammert,et al.  New Features in the Design of Axial-Flow Compressors With Tandem Blades , 1981 .

[40]  Leonhard Fottner,et al.  Highly Loaded Tandem Compressor Cascade With Variable Camber and Stagger , 1993 .

[41]  Hiroaki Hasegawa,et al.  Development of Highly Loaded Fan with Tandem Cascade , 2003 .

[43]  Bhaskar Roy,et al.  On the Application of Variable Camber Blading in Axial Flow Fans and Compressors , 1996 .

[44]  Bo Song.  Experimental and Numerical Investigations of Optimized High-Turning Supercritical Compressor Blades , 2003 .

[45]  Nicholas A. Cumpsty,et al.  The Use of Sweep and Dihedral in Multistage Axial Flow Compressor Blading: Part I — University Research and Methods Development , 2002 .

[46]  A. J. Wennerstrom,et al.  Highly Loaded Axial Flow Compressors: History and Current Developments , 1990 .

[47]  K. Bammert,et al.  Investigations of an Axial Flow Compressor with Tandem Cascades , 1980 .

[48]  Three-Dimensional Motion in Axial-Flow Impellers , 1956 .

[49]  D. C. Wisler.  Core compressor exit stage study. Volume 1: Blading design. [turbofan engines] , 1977 .

[50]  Rodrick V. Chima.  Calculation of Tip Clearance Effects in a Transonic Compressor Rotor , 1996 .

[51]  K.-L. Tzuoo,et al.  Design Methodology for Splittered Axial Compressor Rotors , 1990 .

[52]  George R. Frost,et al.  Design of a Rotor Incorporating Splitter Vanes for a High Pressure Ratio Supersonic Axial Compressor Stage , 1974 .

[53]  James M. M. Place,et al.  Three-dimensional flow in core compressors. , 1997 .

[54]  D. P. Gentile,et al.  The Use of a Circumferentially Nonuniform Stator to Attenuate Harmful Aerodynamic and Mechanical Interactions in an Advanced Mixed Flow Splittered Rotor/Tandem Variable Stator LP Compressor , 2005 .

[55]  A. M. O. Smith,et al.  High-Lift Aerodynamics , 1975 .

[56]  Gu Chun-wei.  Effect of Tip Clearance on Compressor Performance , 2007 .